#include "legato.h"
#include "le_wifiDefs_interface.h"
#include "le_wifiAp_common.h"

Typedefs
typedef void(*	le_wifiAp_DisconnectHandler_t) (void *)

Functions
void	le_wifiAp_ConnectService (void)

le_result_t	le_wifiAp_TryConnectService (void)

LE_FULL_API void	le_wifiAp_SetServerDisconnectHandler (le_wifiAp_DisconnectHandler_t disconnectHandler, void *contextPtr)

void	le_wifiAp_DisconnectService (void)

le_wifiAp_NewEventHandlerRef_t	le_wifiAp_AddNewEventHandler (le_wifiAp_EventHandlerFunc_t handlerPtr, void *contextPtr)

void	le_wifiAp_RemoveNewEventHandler (le_wifiAp_NewEventHandlerRef_t handlerRef)

le_result_t	le_wifiAp_Start (void)

le_result_t	le_wifiAp_Stop (void)

le_result_t	le_wifiAp_SetSsid (const uint8_t *ssidPtr, size_t ssidSize)

le_result_t	le_wifiAp_SetSecurityProtocol (le_wifiAp_SecurityProtocol_t securityProtocol)

le_result_t	le_wifiAp_SetPassPhrase (const char *LE_NONNULL passPhrase)

le_result_t	le_wifiAp_SetPreSharedKey (const char *LE_NONNULL preSharedKey)

le_result_t	le_wifiAp_SetDiscoverable (bool discoverable)

le_result_t	le_wifiAp_SetIeeeStandard (le_wifiAp_IeeeStdBitMask_t stdMask)

le_result_t	le_wifiAp_GetIeeeStandard (le_wifiAp_IeeeStdBitMask_t *stdMaskPtrPtr)

le_result_t	le_wifiAp_SetChannel (uint16_t channelNumber)

le_result_t	le_wifiAp_SetCountryCode (const char *LE_NONNULL countryCode)

le_result_t	le_wifiAp_SetMaxNumberOfClients (int8_t maxNumberOfClient)

le_result_t	le_wifiAp_SetIpRange (const char LE_NONNULL ipAp, const char LE_NONNULL ipStart, const char *LE_NONNULL ipStop)

Detailed Description

Legato c_le_wifiAp include file.

Copyright (C) Sierra Wireless Inc.

Typedef Documentation

◆ le_wifiAp_DisconnectHandler_t

typedef void(* le_wifiAp_DisconnectHandler_t) (void *)

Type for handler called when a server disconnects.

Function Documentation

◆ le_wifiAp_AddNewEventHandler()

le_wifiAp_NewEventHandlerRef_t le_wifiAp_AddNewEventHandler	(	le_wifiAp_EventHandlerFunc_t	handlerPtr,
		void *	contextPtr
	)

WiFi Access Point Events. WiFi Access Point Security levels. IEEE 802.11 standards Bit Mask Handler for WiFi Access Point changes Reference type used by Add/Remove functions for EVENT 'le_wifiAp_NewEvent' Add handler function for EVENT 'le_wifiAp_NewEvent'

These events provide information on WiFi Access Point

Parameters

[in]	handlerPtr
[in]	contextPtr

◆ le_wifiAp_ConnectService()

void le_wifiAp_ConnectService ( void )

Connect the current client thread to the service providing this API. Block until the service is available.

For each thread that wants to use this API, either ConnectService or TryConnectService must be called before any other functions in this API. Normally, ConnectService is automatically called for the main thread, but not for any other thread. For details, see Client-specific Functions.

This function is created automatically.

◆ le_wifiAp_DisconnectService()

void le_wifiAp_DisconnectService ( void )

Disconnect the current client thread from the service providing this API.

Normally, this function doesn't need to be called. After this function is called, there's no longer a connection to the service, and the functions in this API can't be used. For details, see Client-specific Functions.

This function is created automatically.

◆ le_wifiAp_GetIeeeStandard()

le_result_t le_wifiAp_GetIeeeStandard ( le_wifiAp_IeeeStdBitMask_t * stdMaskPtrPtr )

Get which IEEE standard was set. Default hardware mode is IEEE 802.11g.

Returns

LE_FAULT if the function failed.
LE_OK if the function succeeded.

Parameters

[out] stdMaskPtrPtr Bit mask for the IEEE standard.

◆ le_wifiAp_RemoveNewEventHandler()

void le_wifiAp_RemoveNewEventHandler ( le_wifiAp_NewEventHandlerRef_t handlerRef )

Remove handler function for EVENT 'le_wifiAp_NewEvent'

Parameters

[in] handlerRef

◆ le_wifiAp_SetChannel()

le_result_t le_wifiAp_SetChannel ( uint16_t channelNumber )

Set which WiFi Channel to use. Default value is 7. Some legal restrictions might apply for your region. The channel number must be between 1 and 14 for IEEE 802.11b/g. The channel number must be between 7 and 196 for IEEE 802.11a. The channel number must be between 1 and 6 for IEEE 802.11ad.

Returns

LE_OUT_OF_RANGE if requested channel number is out of range.
LE_OK if the function succeeded.

Parameters

[in] channelNumber the channel number.

◆ le_wifiAp_SetCountryCode()

le_result_t le_wifiAp_SetCountryCode ( const char *LE_NONNULL countryCode )

Set what country code to use for regulatory domain. ISO/IEC 3166-1 Alpha-2 code is used. Default country code is US.

Returns

LE_FAULT if the function failed.
LE_OK if the function succeeded.

Parameters

[in] countryCode the country code.

◆ le_wifiAp_SetDiscoverable()

le_result_t le_wifiAp_SetDiscoverable ( bool discoverable )

Set if the Access Point should announce its presence. Default value is TRUE. If the value is set to FALSE, the Access Point will be hidden.

Returns: LE_OK if the function succeeded.

Parameters

[in] discoverable If TRUE the Access Point shows up on scans, else it is hidden.

◆ le_wifiAp_SetIeeeStandard()

le_result_t le_wifiAp_SetIeeeStandard ( le_wifiAp_IeeeStdBitMask_t stdMask )

Set which IEEE standard to use. Default hardware mode is IEEE 802.11g.

Returns

LE_BAD_PARAMETER if invalid IEEE standard is set.
LE_OK if the function succeeded.

Parameters

[in] stdMask Bit mask for the IEEE standard.

◆ le_wifiAp_SetIpRange()

le_result_t le_wifiAp_SetIpRange	(	const char *LE_NONNULL	ipAp,
		const char *LE_NONNULL	ipStart,
		const char *LE_NONNULL	ipStop
	)

Defines the IP adresses range for the host AP.

Returns

LE_BAD_PARAMETER if at least one of the given IP addresses is invalid.
LE_FAULT if a system call failed.
LE_OK if the function succeeded.

Parameters

[in]	ipAp	the IP address of the Access Point.
[in]	ipStart	the start IP address of the Access Point.
[in]	ipStop	the stop IP address of the Access Point.

◆ le_wifiAp_SetMaxNumberOfClients()

le_result_t le_wifiAp_SetMaxNumberOfClients ( int8_t maxNumberOfClient )

Set number of maximally allowed clients to connect to the Access Point at the same time.

Returns

LE_OUT_OF_RANGE if requested number of users exceeds the capabilities of the Access Point.
LE_OK if the function succeeded.

Parameters

[in] maxNumberOfClient the maximum number of clients

◆ le_wifiAp_SetPassPhrase()

le_result_t le_wifiAp_SetPassPhrase ( const char *LE_NONNULL passPhrase )

Set the passphrase used to generate the PSK.

Note: If the PSK is to be set directly, please use le_wifiAp_SetPreSharedKey()

Returns

LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in] passPhrase pass-phrase for PSK

◆ le_wifiAp_SetPreSharedKey()

le_result_t le_wifiAp_SetPreSharedKey ( const char *LE_NONNULL preSharedKey )

Set the Pre Shared Key, PSK. There is no default value, since le_wifiAp_SetPassPhrase is used as default.

Note: the difference between le_wifiAp_SetPassPhrase() and this function

Returns

LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in] preSharedKey PSK. Note the difference between PSK and Pass Phrase.

◆ le_wifiAp_SetSecurityProtocol()

le_result_t le_wifiAp_SetSecurityProtocol ( le_wifiAp_SecurityProtocol_t securityProtocol )

Set the Security protocol to use. Default value is SECURITY_WPA2.

Note: that the SSID does not have to be human readable ASCII values, but often has.

Returns

LE_BAD_PARAMETER if some parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in] securityProtocol The security protocol to use.

◆ le_wifiAp_SetServerDisconnectHandler()

LE_FULL_API void le_wifiAp_SetServerDisconnectHandler	(	le_wifiAp_DisconnectHandler_t	disconnectHandler,
		void *	contextPtr
	)

Set handler called when server disconnection is detected.

When a server connection is lost, call this handler then exit with LE_FATAL. If a program wants to continue without exiting, it should call longjmp() from inside the handler.

◆ le_wifiAp_SetSsid()

le_result_t le_wifiAp_SetSsid	(	const uint8_t *	ssidPtr,
		size_t	ssidSize
	)

Set the Service set identification (SSID) of the AccessPoint Default value is "LEGATO Access Point"

Note: that the SSID does not have to be human readable ASCII values, but often has.

Returns

LE_BAD_PARAMETER if some parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	ssidPtr	The SSID to set as a octet array.
[in]	ssidSize

◆ le_wifiAp_Start()

le_result_t le_wifiAp_Start ( void )

This function starts the WIFI Access Point.

Note: that all settings, if to be used, such as security, username, password must set prior to starting the Access Point.

Returns

LE_FAULT if the function failed.
LE_OK if the function succeeded.

◆ le_wifiAp_Stop()

le_result_t le_wifiAp_Stop ( void )

This function stops the WIFI Access Point.

Returns

LE_FAULT if the function failed.
LE_OK if the function succeeded.

◆ le_wifiAp_TryConnectService()

le_result_t le_wifiAp_TryConnectService ( void )

Try to connect the current client thread to the service providing this API. Return with an error if the service is not available.

For each thread that wants to use this API, either ConnectService or TryConnectService must be called before any other functions in this API. Normally, ConnectService is automatically called for the main thread, but not for any other thread. For details, see Client-specific Functions.

This function is created automatically.

Returns

LE_OK if the client connected successfully to the service.
LE_UNAVAILABLE if the server is not currently offering the service to which the client is bound.
LE_NOT_PERMITTED if the client interface is not bound to any service (doesn't have a binding).
LE_COMM_ERROR if the Service Directory cannot be reached.

/ Build Apps

le_wifiAp_interface.h File Reference

Typedefs

Functions

Detailed Description

Typedef Documentation

◆ le_wifiAp_DisconnectHandler_t

Function Documentation

◆ le_wifiAp_AddNewEventHandler()

◆ le_wifiAp_ConnectService()

◆ le_wifiAp_DisconnectService()

◆ le_wifiAp_GetIeeeStandard()

◆ le_wifiAp_RemoveNewEventHandler()

◆ le_wifiAp_SetChannel()

◆ le_wifiAp_SetCountryCode()

◆ le_wifiAp_SetDiscoverable()

◆ le_wifiAp_SetIeeeStandard()

◆ le_wifiAp_SetIpRange()

◆ le_wifiAp_SetMaxNumberOfClients()

◆ le_wifiAp_SetPassPhrase()

◆ le_wifiAp_SetPreSharedKey()

◆ le_wifiAp_SetSecurityProtocol()

◆ le_wifiAp_SetServerDisconnectHandler()

◆ le_wifiAp_SetSsid()

◆ le_wifiAp_Start()

◆ le_wifiAp_Stop()

◆ le_wifiAp_TryConnectService()