#include "legato.h"
#include "le_wifiDefs_interface.h"

Typedefs
typedef void(*	le_wifiClient_DisconnectHandler_t) (void *)

typedef struct le_wifiClient_AccessPoint *	le_wifiClient_AccessPointRef_t

typedef struct le_wifiClient_NewEventHandler *	le_wifiClient_NewEventHandlerRef_t

typedef void(*	le_wifiClient_NewEventHandlerFunc_t) (le_wifiClient_Event_t event, void *contextPtr)

Enumerations
enum	le_wifiClient_Event_t { LE_WIFICLIENT_EVENT_CONNECTED = 0, LE_WIFICLIENT_EVENT_DISCONNECTED = 1, LE_WIFICLIENT_EVENT_SCAN_DONE = 2, LE_WIFICLIENT_EVENT_SCAN_FAILED = 3 }

enum	le_wifiClient_SecurityProtocol_t { LE_WIFICLIENT_SECURITY_NONE = 0, LE_WIFICLIENT_SECURITY_WEP = 1, LE_WIFICLIENT_SECURITY_WPA_PSK_PERSONAL = 2, LE_WIFICLIENT_SECURITY_WPA2_PSK_PERSONAL = 3, LE_WIFICLIENT_SECURITY_WPA_EAP_PEAP0_ENTERPRISE = 4, LE_WIFICLIENT_SECURITY_WPA2_EAP_PEAP0_ENTERPRISE = 5 }

Functions
void	le_wifiClient_ConnectService (void)

le_result_t	le_wifiClient_TryConnectService (void)

void	le_wifiClient_SetServerDisconnectHandler (le_wifiClient_DisconnectHandler_t disconnectHandler, void *contextPtr)

void	le_wifiClient_DisconnectService (void)

le_wifiClient_NewEventHandlerRef_t	le_wifiClient_AddNewEventHandler (le_wifiClient_NewEventHandlerFunc_t handlerPtr, void *contextPtr)

void	le_wifiClient_RemoveNewEventHandler (le_wifiClient_NewEventHandlerRef_t handlerRef)

le_result_t	le_wifiClient_Start (void)

le_result_t	le_wifiClient_Stop (void)

le_result_t	le_wifiClient_Scan (void)

le_wifiClient_AccessPointRef_t	le_wifiClient_GetFirstAccessPoint (void)

le_wifiClient_AccessPointRef_t	le_wifiClient_GetNextAccessPoint (void)

int16_t	le_wifiClient_GetSignalStrength (le_wifiClient_AccessPointRef_t accessPointRef)

le_result_t	le_wifiClient_GetBssid (le_wifiClient_AccessPointRef_t accessPointRef, char *bssid, size_t bssidSize)

le_result_t	le_wifiClient_GetSsid (le_wifiClient_AccessPointRef_t accessPointRef, uint8_t ssidPtr, size_t ssidSizePtr)

le_result_t	le_wifiClient_SetPassphrase (le_wifiClient_AccessPointRef_t accessPointRef, const char *LE_NONNULL PassPhrase)

le_result_t	le_wifiClient_SetPreSharedKey (le_wifiClient_AccessPointRef_t accessPointRef, const char *LE_NONNULL PreSharedKey)

le_result_t	le_wifiClient_SetSecurityProtocol (le_wifiClient_AccessPointRef_t accessPointRef, le_wifiClient_SecurityProtocol_t securityProtocol)

le_result_t	le_wifiClient_SetUserCredentials (le_wifiClient_AccessPointRef_t accessPointRef, const char LE_NONNULL userName, const char LE_NONNULL password)

le_result_t	le_wifiClient_SetWepKey (le_wifiClient_AccessPointRef_t accessPointRef, const char *LE_NONNULL wepKey)

le_result_t	le_wifiClient_SetHiddenNetworkAttribute (le_wifiClient_AccessPointRef_t accessPointRef, bool hidden)

le_wifiClient_AccessPointRef_t	le_wifiClient_Create (const uint8_t *SsidPtr, size_t SsidSize)

le_result_t	le_wifiClient_Delete (le_wifiClient_AccessPointRef_t accessPointRef)

le_result_t	le_wifiClient_Connect (le_wifiClient_AccessPointRef_t accessPointRef)

le_result_t	le_wifiClient_Disconnect (void)

Detailed Description

Legato WiFi Client Service include file.

Copyright (C) Sierra Wireless Inc.

Typedef Documentation

typedef struct le_wifiClient_AccessPoint* le_wifiClient_AccessPointRef_t

Reference type for AccessPoint that is returned by the WiFi Scan.

typedef void(* le_wifiClient_DisconnectHandler_t) (void *)

Type for handler called when a server disconnects.

typedef void(* le_wifiClient_NewEventHandlerFunc_t) (le_wifiClient_Event_t event,void *contextPtr)

Handler for WiFi Client changes

typedef struct le_wifiClient_NewEventHandler* le_wifiClient_NewEventHandlerRef_t

Reference type used by Add/Remove functions for EVENT 'le_wifiClient_NewEvent'

Enumeration Type Documentation

enum le_wifiClient_Event_t

WiFi Client Events.

Enumerator
LE_WIFICLIENT_EVENT_CONNECTED	WiFi Client Connected.
LE_WIFICLIENT_EVENT_DISCONNECTED	WiFi Client Disconnected.
LE_WIFICLIENT_EVENT_SCAN_DONE	WiFi Scan result for available Access Points available.
LE_WIFICLIENT_EVENT_SCAN_FAILED	WiFi Scan failed.

enum le_wifiClient_SecurityProtocol_t

WiFi Client Security Protocol for connection

Enumerator
LE_WIFICLIENT_SECURITY_NONE	no security.
LE_WIFICLIENT_SECURITY_WEP	Using WEP.
LE_WIFICLIENT_SECURITY_WPA_PSK_PERSONAL	Using WPA.
LE_WIFICLIENT_SECURITY_WPA2_PSK_PERSONAL	Using WPA2.
LE_WIFICLIENT_SECURITY_WPA_EAP_PEAP0_ENTERPRISE	Using WPA Enterprise.
LE_WIFICLIENT_SECURITY_WPA2_EAP_PEAP0_ENTERPRISE	Using WPA2 Enterprise.

Function Documentation

le_wifiClient_NewEventHandlerRef_t le_wifiClient_AddNewEventHandler	(	le_wifiClient_NewEventHandlerFunc_t	handlerPtr,
		void *	contextPtr
	)

Add handler function for EVENT 'le_wifiClient_NewEvent'

This event provide information on WiFi Client event changes.

Parameters

[in]	handlerPtr
[in]	contextPtr

le_result_t le_wifiClient_Connect ( le_wifiClient_AccessPointRef_t accessPointRef )

Connect to the WiFi Access Point. All authentication must be set prior to calling this function.

Returns

LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Note: For PSK credentials see le_wifiClient_SetPassphrase() or le_wifiClient_SetPreSharedKey() .; For WPA-Enterprise credentials see le_wifiClient_SetUserCredentials()

Parameters

[in] accessPointRef WiFi Access Point reference.

void le_wifiClient_ConnectService ( void )

Connect the current client thread to the service providing this API. Block until the service is available.

For each thread that wants to use this API, either ConnectService or TryConnectService must be called before any other functions in this API. Normally, ConnectService is automatically called for the main thread, but not for any other thread. For details, see Client-specific Functions.

This function is created automatically.

le_wifiClient_AccessPointRef_t le_wifiClient_Create	(	const uint8_t *	SsidPtr,
		size_t	SsidSize
	)

This function creates a reference to an Access Point given its SSID. If an Access Point is hidden, it will not show up in the scan. So, its SSID must be known in advance in order to create a reference.

Note: This function fails if called while scan is running.

Returns: AccessPoint reference to the current

Parameters

[in]	SsidPtr	The SSID as a octet array.
[in]	SsidSize

le_result_t le_wifiClient_Delete ( le_wifiClient_AccessPointRef_t accessPointRef )

Deletes an accessPointRef.

Note: The handle becomes invalid after it has been deleted.

Returns

LE_BAD_PARAMETER if accessPointRef was not found.
LE_BUSY if the function was called during a scan.
LE_OK if the function succeeded.

Parameters

[in] accessPointRef WiFi Access Point reference.

le_result_t le_wifiClient_Disconnect ( void )

Disconnect from the current connected WiFi Access Point.

Returns

LE_FAULT if the function failed.
LE_OK if the function succeeded.

void le_wifiClient_DisconnectService ( void )

Disconnect the current client thread from the service providing this API.

Normally, this function doesn't need to be called. After this function is called, there's no longer a connection to the service, and the functions in this API can't be used. For details, see Client-specific Functions.

This function is created automatically.

le_result_t le_wifiClient_GetBssid	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		char *	bssid,
		size_t	bssidSize
	)

Get the Basic Service set identifier (BSSID) of the AccessPoint

Returns

LE_FAULT if the function failed.
LE_BAD_PARAMETER if some parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[out]	bssid	The BSSID
[in]	bssidSize

le_wifiClient_AccessPointRef_t le_wifiClient_GetFirstAccessPoint ( void )

Get the first WiFi Access Point found. Will return the Access Points in the order of found.

Returns

WiFi Access Point reference if ok.
NULL if no Access Point reference available.

le_wifiClient_AccessPointRef_t le_wifiClient_GetNextAccessPoint ( void )

Get the next WiFi Access Point. Will return the Access Points in the order of found. This function must be called in the same context as the GetFirstAccessPoint

Returns

WiFi Access Point reference if ok.
NULL if no Access Point reference available.

int16_t le_wifiClient_GetSignalStrength ( le_wifiClient_AccessPointRef_t accessPointRef )

Get the signal strength of the AccessPoint

Returns

signal strength in dBm. Example -30 = -30dBm
if no signal available it will return OxFFFF

Parameters

[in] accessPointRef WiFi Access Point reference.

le_result_t le_wifiClient_GetSsid	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		uint8_t *	ssidPtr,
		size_t *	ssidSizePtr
	)

Get the Service set identification (SSID) of the AccessPoint

Note: that the SSID does not have to be human readable ASCII values, but often has.

Returns

LE_FAULT if the function failed.
LE_BAD_PARAMETER if some parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[out]	ssidPtr	The SSID returned as a octet array.
[in,out]	ssidSizePtr

void le_wifiClient_RemoveNewEventHandler ( le_wifiClient_NewEventHandlerRef_t handlerRef )

Remove handler function for EVENT 'le_wifiClient_NewEvent'

Parameters

[in] handlerRef

le_result_t le_wifiClient_Scan ( void )

Start Scanning for WiFi Access points Will result in event LE_WIFICLIENT_EVENT_SCAN_DONE when the scan results are available.

Returns

LE_FAULT if the function failed.
LE_OK if the function succeeded.

le_result_t le_wifiClient_SetHiddenNetworkAttribute	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		bool	hidden
	)

This function specifies whether the target Access Point is hiding its presence from clients or not. When an Access Point is hidden, it cannot be discovered by a scan process.

Note: By default, this attribute is not set which means that the client is unable to connect to a hidden access point. When enabled, the client will be able to connect to the access point whether it is hidden or not.

Returns

LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[in]	hidden	If TRUE, the WIFI client will be able to connect to a hidden access point.

le_result_t le_wifiClient_SetPassphrase	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		const char *LE_NONNULL	PassPhrase
	)

Set the passphrase used to generate the PSK.

Note: the difference between le_wifiClient_SetPreSharedKey() and this function

Returns

LE_FAULT if the function failed.
LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[in]	PassPhrase	pass-phrase for PSK

le_result_t le_wifiClient_SetPreSharedKey	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		const char *LE_NONNULL	PreSharedKey
	)

Set the Pre Shared Key, PSK.

Note: the difference between le_wifiClient_SetPassphrase() and this function

Returns

LE_FAULT if the function failed.
LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[in]	PreSharedKey	PSK. Note the difference between PSK and Pass Phrase.

le_result_t le_wifiClient_SetSecurityProtocol	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		le_wifiClient_SecurityProtocol_t	securityProtocol
	)

Set the security protocol for connection

Returns

LE_FAULT if the function failed.
LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[in]	securityProtocol	Security Mode

void le_wifiClient_SetServerDisconnectHandler	(	le_wifiClient_DisconnectHandler_t	disconnectHandler,
		void *	contextPtr
	)

Set handler called when server disconnection is detected.

When a server connection is lost, call this handler then exit with LE_FATAL. If a program wants to continue without exiting, it should call longjmp() from inside the handler.

le_result_t le_wifiClient_SetUserCredentials	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		const char *LE_NONNULL	userName,
		const char *LE_NONNULL	password
	)

WPA-Enterprise requires a username and password to authenticate. This function sets these parameters.

Returns

LE_FAULT if the function failed.
LE_BAD_PARAMETER if parameter is invalid.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[in]	userName	UserName used for WPA-Enterprise.
[in]	password	Password used for WPA-Enterprise.

le_result_t le_wifiClient_SetWepKey	(	le_wifiClient_AccessPointRef_t	accessPointRef,
		const char *LE_NONNULL	wepKey
	)

Set the WEP key (WEP)

Returns

LE_FAULT if the function failed.
LE_OK if the function succeeded.

Parameters

[in]	accessPointRef	WiFi Access Point reference.
[in]	wepKey	The WEP key

le_result_t le_wifiClient_Start ( void )

This function starts the WIFI device.

Returns

LE_FAULT if the function failed.
LE_BUSY if the WIFI device is already started.
LE_OK if the function succeeded.

le_result_t le_wifiClient_Stop ( void )

This function stops the WIFI device.

Returns

LE_FAULT if the function failed.
LE_DUPLICATE if the WIFI device is already stopped.
LE_OK if the function succeeded.

le_result_t le_wifiClient_TryConnectService ( void )

Try to connect the current client thread to the service providing this API. Return with an error if the service is not available.

For each thread that wants to use this API, either ConnectService or TryConnectService must be called before any other functions in this API. Normally, ConnectService is automatically called for the main thread, but not for any other thread. For details, see Client-specific Functions.

This function is created automatically.

Returns

LE_OK if the client connected successfully to the service.
LE_UNAVAILABLE if the server is not currently offering the service to which the client is bound.
LE_NOT_PERMITTED if the client interface is not bound to any service (doesn't have a binding).
LE_COMM_ERROR if the Service Directory cannot be reached.

/ Build Apps

le_wifiClient_interface.h File Reference

Typedefs

Enumerations

Functions

Detailed Description

Typedef Documentation

Enumeration Type Documentation

Function Documentation