Modem Control platform constraints

Signal strength

On Qualcomm-based platform, the signal strength indication delta resolution set in le_mrc_SetSignalStrengthIndDelta() API depends on the Radio Access Technology (RAT) used.

For TD-SCDMA RAT technology, the signal delta is set with steps of 1 dBm with a minimum of one dBm. Intermediate values less than 1 dBm are rounded. For the other RAT technologies, the signal delta is set with steps of 0.1 dBm with a minimum of 0.1 dBm.

For example, to set a signal strength indication delta of 10.6 dBm, the delta value must be set to

  1. This value is rounded to 11 dBm for TD-SCDMA RAT technology. (105 would have been equivalent to 10dBm on TD-SCDMA).

Under TD-SCDMA RAT technology, a delta value less than 10 is forbiden.

APN Length

To set the Access Point Name (APN) for the given profile, le_mdc_SetAPN() API is used.

The maximum APN length is limited by the platform.

AR755x AR758x AR759x AR8652 WP750x WP76xx WP77xx WP8548
Maxmium APN length 62 62 100

Disconnect Reason

To get the disconnection reason, le_mdc_GetDisconnectionReasonExt() API is used.

The following le_mdc_DisconnectionReason_t return values are unsupported by AR758x/9x platforms:

LE_MDC_DISC_INSUFFICIENT_MBMS_CAPABILITIES
LE_MDC_DISC_UNKNOWN_PDP_ADDR_OR_TYPE
LE_MDC_DISC_MULTICAST_TIME_OUT
LE_MDC_DISC_BEARER_CONTROL_MODE_VIOLATION
LE_MDC_DISC_IPV4_ONLY_ALLOWED
LE_MDC_DISC_IPV6_ONLY_ALLOWED
LE_MDC_DISC_SINGLE_ADDR_ONLY_ALLOWED
LE_MDC_DISC_COLLISION_WITH_NETWORK_INITIATED_REQ
LE_MDC_DISC_BEARER_HANDLING_UNSUPPORTED
LE_MDC_DISC_MAX_PDP_CONTEXTS
LE_MDC_DISC_APN_UNSUPPORTED_FOR_RAT_AND_PLMN

Mobile Terminated PDP context

The Mobile Terminated Packet Data Protocol (PDP) context feature is not supported on all platforms. The table below indicates on which platform the feature is supported. ('X' means the feature is supported)

AR7 AR755x AR758x AR759x AR8652 WPx5xx WP750x WP76xx WP77xx WP85xx
MT-PDP context feature X X X X

Jamming detection

The jamming detection feature is supported on following platforms:

AR755x AR758x AR759x AR8652 WP750x WP76xx WP77xx WP8548
Jamming detection support X

SAR backoff

The SAR backoff state is not supported by all platforms. Also, the maximum number of states may be different among platforms.

AR755x AR758x AR759x AR8652 WP750x WP76xx WP77xx WP8548
SAR backoff state feature X X
SAR maximum number of states 8 8

PCI Network Scan

The PCI scan is not supported by all platforms. The table below indicates on which platform the fature is available. Also, only LTE PCI scan is supported.

AR755x AR758x AR759x AR8652 WP750x WP76xx WP77xx WP8548
LTE PCI scan feature X X X

In order to perform an LTE PCI scan, ensure that only LE_MRC_BITMASK_RAT_LTE is enabled in the RAT preference settings before starting the scan. The configuration can be done using:

  • AT command: AT!SELRAT=06
  • CM tool: cm radio rat LTE
  • Legato API: le_mrc_SetRatPreferences(LE_MRC_BITMASK_RAT_LTE).

See Modem Radio Control API
See Modem Data Control API
Copyright (C) Sierra Wireless Inc.