GPIO for CF3 Selective Suspend
This prototype sample demonstrates a CF3 GPIO Selective Suspend app using the GPIO Service. This app shows how the GPIO can be used to wake the device from the selective suspend state. It uses adef executables, bindings, and processes sections, and cdef requires, cflag, and sources sections.
Go to the sample app code.
CF3 Pin Mapping
This table lists where pins exposed by the GPIO service are connected for mangOH Green for WP76xx.
For mangOH Red, please go to mangOH Red Schematics.
| Service | CF3 Pin | IOT on mangOH |
|---|---|---|
| le_gpioPin7 | 7 | IoT1 - GPIO 2 (pin 25) |
| le_gpioPin8 | 8 | IoT0 - GPIO 4 (pin 27) |
| le_gpioPin13 | 13 | IoT0 - GPIO 3 (pin 26) |
| le_gpioPin21 | 21 | IoT1 - GPIO 4 (pin 27) |
| le_gpioPin22 | 22 | IoT2 - GPIO 1 (pin 24) |
| le_gpioPin23 | 23 | IoT2 - GPIO 2 (pin 25) |
| le_gpioPin24 | 24 | IoT2 - GPIO 3 (pin 26) |
| le_gpioPin25 | 25 | IoT1 - GPIO 1 (pin 24) |
| le_gpioPin32 | 32 | IoT1 - GPIO 3 (pin 26) |
| le_gpioPin33 | 33 | IoT0 - GPIO 2 (pin 25) |
| le_gpioPin42 | 42 | IoT0 - GPIO 1 (pin 24) |
- Note
- IoT2 GPIO4 is not available for use.
Run this to install the sample app:
$ cd apps/sample/gpioCf3SSDemo $ make wp76xx $ update gpioCf3SSDemo.wp76xx.update <ip address>
See
basicAppsCreate
Copyright (C) Sierra Wireless Inc.