le_gnss_interface.h

    1 
    2 
    3 /*
    4  * ====================== WARNING ======================
    5  *
    6  * THE CONTENTS OF THIS FILE HAVE BEEN AUTO-GENERATED.
    7  * DO NOT MODIFY IN ANY WAY.
    8  *
    9  * ====================== WARNING ======================
   10  */
   11 
   12 /**
   13  * @page c_gnss GNSS
   14  *
   15  * @ref le_gnss_interface.h "API Reference" <br>
   16  * @ref platformConstraintsGnss <br>
   17  * @ref howToGNSS "How To Use GNSS" <br>
   18  * @ref toolsTarget_gnss "GNSS target tool" <br>
   19  *
   20  * <HR>
   21  *
   22  * This API provides access to the GNSS device.
   23  *
   24  * GNSS or Global Navigation Satellite System is a satellite navigation system with global coverage.
   25  *
   26  * This API provides function to configure the GNSS device and retrieve position information.
   27  *
   28  * @section le_gnss_binding IPC interfaces binding
   29  *
   30  * All the functions of this API are provided by the @b positioningService application service.
   31  *
   32  * Here's a code sample binding to Positioning services:
   33  * @verbatim
   34    bindings:
   35    {
   36       clientExe.clientComponent.le_gnss -> positioningService.le_gnss
   37    }
   38    @endverbatim
   39  *
   40  * @section le_gnss_ControlApi GNSS Control API
   41  *
   42  * @subsection le_gnss_EnableDisable Enable/Disable GNSS device
   43  *
   44  * The application can enable/disable the GNSS device with the le_gnss_Enable()
   45  * / le_gnss_Disable() functions.
   46  * By default the GNSS device is enabled for the positioningService application service.
   47  * Also see @ref howToGNSS.
   48  *
   49  * A sample code can be seen in the following page:
   50  * - @subpage c_gnssSampleCodeEnableDisable
   51  *
   52  * @subsection le_gnss_StartStop Start/Stop GNSS device
   53  *
   54  * The application shall start the GNSS device calling le_gnss_Start() function.
   55  * The other starting functions that allow to start or restart the GNSS devices in particular modes
   56  * (see @ref le_gnss_StartingMode) are only used for test purposes and allow start performance
   57  * measurement.
   58  * The application shall stop the GNSS device calling le_gnss_Stop() function.
   59  *
   60  * A diagram of GNSS device state machine showing how to use the different starting fonctions can be
   61  * seen at @ref howToGNSS.
   62  *
   63  * A sample code can be seen in the following page:
   64  * - @subpage c_gnssSampleCodeStartStop
   65  *
   66  * @subsubsection le_gnss_StartingMode Starting mode
   67  *
   68  * Starting modes are used only for test purposes and allow start performance measurement.
   69  * @note For more information about start performances, please refer to your specific
   70  * platform documentation.
   71  *
   72  * @subsubsection le_gnss_startMode Start the GNSS device in the specified starting mode
   73  * The le_gnss_StartMode() function clears the @ref le_gnss_Data according to the starting mode and
   74  * starts the GNSS device.
   75  * In HOT mode, no data are cleared, the GNSS is started with its available data. It is equivalent
   76  * to @ref le_gnss_Start() function. In WARM mode, GNSS is started after the Ephemeris are cleared.
   77  * In COLD mode, GNSS is started after all data are cleared except Almanac and in Factory mode GNSS
   78  * is started after default data are set.
   79  *
   80  * @subsubsection le_gnss_ForceHotRestart Restart the GNSS device in HOT mode
   81  * The le_gnss_ForceHotRestart() function performs a "HOT" restart of the GNSS device. The current
   82  * GNSS session is stopped, then started using the available @ref le_gnss_Data.
   83  * Please refer to @ref le_gnss_APIcallsRequirements. Also see @ref howToGNSS.
   84  *
   85  * @subsubsection le_gnss_ForceWarmRestart Restart the GNSS device in WARM mode
   86  * The le_gnss_ForceWarmRestart() function performs a "WARM" restart of the GNSS device. The current
   87  * GNSS session is stopped, then started using the available @ref le_gnss_Data.
   88  * Please refer to @ref le_gnss_APIcallsRequirements. Also see @ref howToGNSS.
   89  * @Note This API has a platform dependent feature. Please refer to
   90  * @ref platformConstraintsGnss_WarmRestart for further details.
   91  *
   92  * @subsubsection le_gnss_ForceColdRestart Restart the GNSS device in COLD mode
   93  * The le_gnss_ForceColdRestart() function performs a "COLD" restart of the GNSS device. The current
   94  * GNSS session is stopped, then started using the available @ref le_gnss_Data.
   95  * Please refer to @ref le_gnss_APIcallsRequirements. Also see @ref howToGNSS.
   96  *
   97  * @subsubsection le_gnss_ForceFactoryRestart Restart the GNSS device in FACTORY mode
   98  * The le_gnss_ForceFactoryRestart() function performs a "FACTORY" restart of the GNSS device.
   99  * The current GNSS session is stopped, then started using the available @ref le_gnss_Data.
  100  * Please refer to @ref le_gnss_APIcallsRequirements. Also see @ref howToGNSS.
  101  *
  102  * @subsubsection le_gnss_Data GNSS data
  103  * The following table describes the <b>minimum</b> required data for those starting modes:
  104  *
  105  * | GNSS Data / Starting mode  | HOT  | WARM  | COLD  | FACTORY |
  106  *| -----------------------| -----| ------| ----- | ------- |
  107  *| Broadcasted Ephemeris  | Used |  |  |  |
  108  *| Extended Ephemeris     | Used(1) | Used(2) | Used(2) | Removed (3) |
  109  *| Approximate Time and Position  | Used | Used |  |  |
  110  *| Almanac   | Used | Used | Used | Used (Factory) |
  111  *
  112  * For example, a requested HOT start without valid broadcasted ephemeris will be treated
  113  * as a WARM start.
  114  *
  115  * @note (1) Extended Ephemeris can be used if Broadcasted Ephemeris are not valid.
  116  * The Extended Ephemeris could be loaded using the le_gnss_LoadExtendedEphemerisFile()
  117  * function.
  118  * @note (2) Extended Ephemeris is used if the Extended Ephemeris file is loaded and valid.
  119  * @note (3) Extended Ephemeris are removed when a FACTORY start is requested.
  120  * The Extended Ephemeris could be loaded again using the le_gnss_LoadExtendedEphemerisFile()
  121  * function.
  122  *
  123  * @subsubsection SettingConfiguration Setting configuration
  124  *
  125  * @warning The GNSS setting configuration depends on the platform. Please refer to
  126  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
  127  *
  128  * @subsubsection le_gnss_TTFF Time To First Fix (TTFF)
  129  * The le_gnss_GetTtff() function provides the TTFF (first between 2-Dimensional or 3-Dimensional
  130  * position fix) of the last position fix.
  131  * The GNSS fix position is calculated by the GNSS engine. Its state can be retrieved by
  132  * le_gnss_GetPositionState() function. The GNSS fix position states are given by le_gnss_FixState_t
  133  * enum.
  134  * @note The "estimated" fix is obtained when less than 3 Satellites Vehicle (SV) are used to
  135  * establish the fix. It includes the case when no SVs are used.
  136  *
  137  * Please refer to @ref le_gnss_APIcallsRequirements. Also see @ref howToGNSS.
  138  *
  139  * A sample code can be seen in the following page:
  140  * - @subpage c_gnssSampleCodeReStart
  141  *
  142  * @subsubsection le_gnss_InjectUtcTime Inject UTC time
  143  * The le_gnss_InjectUtcTime() function injects the UTC time into the location engine. Providing an
  144  * accurate UTC time reduces the time to find the first fix.
  145  * @note It is mandatory to enable the 'Extended Ephemeris' file injection into the GNSS device with
  146  * le_gnss_EnableExtendedEphemerisFile() before injecting time with le_gnss_InjectUtcTime API.
  147  * @warning Your GNSS device may require a restart to take into account the enabling of the
  148  * 'Extended Ephemeris' file injection.
  149  * Please refer to your platform documentation @ref platformConstraintsGnss_SettingConfiguration for
  150  * further details.
  151  *
  152  * @subsection le_gnss_AcquisitionRate Acquisition rate
  153  * The GNSS position is computed and delivered each acquisition rate. The acquisition rate defines
  154  * the time interval that must elapse between two final GPS positions calculation and reports.
  155  * Its default value is 1 second.
  156  * The application can configure/retreive the GNSS device acquisition rate with the
  157  * le_gnss_SetAcquisitionRate() / le_gnss_GetAcquisitionRate() functions.
  158  *
  159  * Please refer to @ref le_gnss_APIcallsRequirements.
  160  *
  161  * @subsection le_gnss_EnableDisableExternalLna Control EXT_GPS_LNA_EN signal
  162  * The le_gnss_EnableExternalLna() function enables the EXT_GPS_LNA_EN signal. The pin is set high
  163  * when the GNSS state is active, and set low when the GNSS state is inactive.
  164  *
  165  * The le_gnss_DisableExternalLna() function disables the EXT_GPS_LNA_EN signal. The pin remains off
  166  * regardless of the GNSS state.
  167  *
  168  * Please refer to @ref le_gnss_APIcallsRequirements.
  169  *
  170  * A sample code can be seen in the following page:
  171  * - @subpage c_gnssSampleCodeAcquisitionRate
  172  *
  173  * @subsection le_gnss_SetGetConstellation GNSS constellation selection
  174  *
  175  * The le_gnss_SetConstellation() function selects the GNSS constellation(s) used in solution.
  176  * If all GNSS constellations are disabled, the GNSS engine is disabled.
  177  *
  178  * @warning Your GNSS device may require a restart to take into account this change.
  179  * Please refer to your platform documentation @ref platformConstraintsGnss_SettingConfiguration for
  180  * further details.
  181  *
  182  * Combinations of constellation for GPS, GLONASS, BDS, GALILEO and QZSS satellites are currently
  183  * supported. Constellation for SBAS satellites is not supported.
  184  *
  185  * @warning Some constellation types are unsupported depending on the platform. Please refer to
  186  * @ref platformConstraintsGnss_ConstellationType section for full details.
  187  *
  188  * All supported GNSS constellations are enabled by default.
  189  * The le_gnss_GetConstellation() function gets the GNSS constellation(s) enabled to be used
  190  * in solution.
  191  *
  192  * le_gnss_SetConstellationArea sets the area for a GNSS constellation. le_gnss_GetConstellationArea
  193  * gets the area for a GNSS constellation.
  194  *
  195  * A sample code can be seen in the following page:
  196  * - @subpage c_gnssSampleCodeConstellation
  197  *
  198  * The le_gnss_GetSupportedConstellations() function gets a bit mask of the constellations
  199  * supported on the platform.
  200  *
  201  * @subsection le_gnss_SetGetMinElevation GNSS minimum elevation selection
  202  *
  203  * The le_gnss_SetMinElevation() function sets the GNSS minimum elevation.
  204  * Satellites with elevation lower than the minimum elevation will be ignored.
  205  *
  206  * The le_gnss_GetMinElevation() function gets the GNSS minimum elevation.
  207  *
  208  * A sample code can be seen in the following page:
  209  * - @subpage c_gnssSampleCodeMinElevation
  210  *
  211  * @subsection le_gnss_NmeaSentences NMEA sentences selection
  212  *
  213  * The le_gnss_SetNmeaSentences() function selects the enabled NMEA sentences in the
  214  * @ref le_gnss_NMEA with a bit mask. The supported values are listed in @ref le_gnss_NmeaBitMask_t.
  215  *
  216  * @note This function may be subject to limitations depending on the platform. Please refer to the
  217  * @ref platformConstraintsGnss page.
  218  *
  219  * @warning Your GNSS device may require a restart to take into account this change.
  220  * Please refer to your platform documentation @ref platformConstraintsGnss_SettingConfiguration for
  221  * further details.
  222  *
  223  * @warning Some NMEA sentences are unsupported depending on the platform. Please refer to
  224  * @ref platformConstraintsGnss_nmeaMask section for full details.
  225  *
  226  * @note All supported NMEA sentences are enabled by default.
  227  *
  228  * The le_gnss_GetNmeaSentences() function gets the bit mask of the enabled NMEA sentences in the
  229  * @ref le_gnss_NMEA.
  230  *
  231  * The le_gnss_GetSupportedNmeaSentences() function gets a bit mask of the NMEA sentences supported
  232  * on the platform.
  233  *
  234  * Please refer to @ref le_gnss_APIcallsRequirements.
  235  *
  236  * A sample code can be seen in the following page:
  237  * - @subpage c_gnssSampleCodeNmeaSentences
  238  *
  239  * @subsection le_gnss_GetMinMaxNmeaRate Get the supported NMEA rates
  240  * The le_gnss_GetMinNmeaRate() function gets the minimum NMEA rate supported on the platform
  241  * in milliseconds.
  242  *
  243  * The le_gnss_GetMaxNmeaRate() function gets the maximum NMEA rate supported on the platform
  244  * in milliseconds.
  245  *
  246  * @subsection le_gnss_APIcallsRequirements API calls Requirements
  247  * The following table shows the pre-requisites when using the GNSS service API function set.
  248  * ''LE_OK or error code'' means the function is authorized in the corresponding state, the request
  249  * is performed and the result is returned; otherwise the returned error is indicated for each state
  250  *.
  251  * | Function / GNSS state  | UNINITIALIZED  | READY  | ACTIVE  | DISABLED |
  252  *| ----------------------------- | --------------------------- | -----------------------------| --------------------------- | --------------------------- |
  253  *| le_gnss_Start() | LE_NOT_PERMITTED | LE_OK or error code | LE_DUPLICATE | LE_NOT_PERMITTED |
  254  *| le_gnss_Stop() | LE_NOT_PERMITTED | LE_DUPLICATE | LE_OK or error code | LE_NOT_PERMITTED |
  255  *| le_gnss_ForceHotRestart() | LE_NOT_PERMITTED | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED |
  256  *| le_gnss_ForceWarmRestart() | LE_NOT_PERMITTED | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED |
  257  *| le_gnss_ForceColdRestart() | LE_NOT_PERMITTED | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED |
  258  *| le_gnss_ForceFactoryRestart() | LE_NOT_PERMITTED | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED |
  259  *| le_gnss_Disable() | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED | LE_DUPLICATE |
  260  *| le_gnss_Enable() | LE_NOT_PERMITTED | LE_DUPLICATE | LE_DUPLICATE | LE_OK or error code |
  261  *| le_gnss_SetConstellation() | LE_NOT_PERMITTED |  LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  262  *| le_gnss_GetConstellation() | LE_NOT_PERMITTED |  LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  263  *| le_gnss_SetConstellationArea() | LE_NOT_PERMITTED |  LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  264  *| le_gnss_GetConstellationArea() | LE_NOT_PERMITTED |  LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  265  *| le_gnss_GetTtff() | LE_NOT_PERMITTED |  LE_OK or error code | LE_OK or error code | LE_NOT_PERMITTED |
  266  *| le_gnss_SetAcquisitionRate() | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  267  *| le_gnss_GetAcquisitionRate() | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  268  *| le_gnss_SetNmeaSentences() | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  269  *| le_gnss_GetNmeaSentences() | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  270  *| le_gnss_EnableExternalLna() | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  271  *| le_gnss_DisableExternalLna() | LE_NOT_PERMITTED | LE_OK or error code | LE_NOT_PERMITTED | LE_NOT_PERMITTED |
  272  *
  273  * Also see @ref howToGNSS.
  274  *
  275  * @section le_gnss_Information GNSS position information
  276  * @ref le_gnss_NMEA
  277  *
  278  * @ref le_gnss_GetInfo
  279  *
  280  * @ref le_gnss_GetLeapSeconds
  281  *
  282  * @subsection le_gnss_NMEA NMEA Flow
  283  * The National Marine Electronics Association (NMEA) standard defines an electrical interface
  284  * and data protocol for communications between marine instrumentation.
  285  *
  286  * The NMEA-0183, scope of this document, defines a set of frame prefixed by
  287  * $GP (concerning Global Positioning System),
  288  * $GL (concerning GLONASS)
  289  * and $GN (concerning combination of navigation systems).
  290  * For more details about NMEA standards, please refer to http://www.nmea.org/.
  291  *
  292  * That NMEA frames flow can be retrieved from the "/dev/nmea" device folder, using for example
  293  * the shell command $<EM> cat /dev/nmea | grep '$G'</EM>
  294  *
  295  * @subsection le_gnss_GetInfo Get position information
  296  * The position information is referenced to a position sample object.
  297  *
  298  * An application can register a handler to be notified of the
  299  * updated position each @ref le_gnss_AcquisitionRate, returning a position sample object.
  300  *
  301  * The GNSS information commonly used such as
  302  * device state, position, time and date, satellites information and accuracy
  303  * can be queried using the following functions:
  304  * - le_gnss_GetState()
  305  * - le_gnss_GetPositionState()
  306  * - le_gnss_GetLocation()
  307  * - le_gnss_GetAltitude()
  308  * - le_gnss_GetDate()
  309  * - le_gnss_GetTime()
  310  * - le_gnss_GetGpsTime()
  311  * - le_gnss_GetGpsLeapSeconds()
  312  * - le_gnss_GetEpochTime()
  313  * - le_gnss_GetTimeAccuracy()
  314  * - le_gnss_GetHorizontalSpeed()
  315  * - le_gnss_GetVerticalSpeed()
  316  * - le_gnss_GetDirection()
  317  * - le_gnss_GetSatellitesInfo()
  318  * - le_gnss_GetSbasConstellationCategory()
  319  * - le_gnss_GetSatellitesStatus()
  320  * - le_gnss_GetDop()
  321  * - le_gnss_GetDilutionOfPrecision()
  322  * - le_gnss_GetAltitudeOnWgs84()
  323  * - le_gnss_GetMagneticDeviation()
  324  *
  325  * le_gnss_SetDataResolution() function can be called to configure the resolution of position data
  326  * type per client session. Currently, three data types are supported:
  327  * - Vertical position accuracy provided by le_gnss_GetAltitude().
  328  * - Vertical speed accuracy provided by le_gnss_GetVerticalSpeed().
  329  * - Horizontal speed accuracy provided by le_gnss_GetHorizontalSpeed().
  330  * Each data type can be set with a resolution from 0 to 3 decimal place.
  331  *
  332  * For example, to get the vertical position accuracy with a resolution of 2 decimal places,
  333  * le_gnss_SetDataResolution() function is called with vertical position accuracy set as data type
  334  * and 2 decimal place is set as resolution, then le_gnss_GetAltitude() function is called.
  335  *
  336  * @note If le_gnss_SetDataResolution() function is not called, the position data types are received
  337  * in their default accuracies.
  338  *
  339  * le_gnss_ConvertDataCoordinateSystem() function can be called to convert a location data value
  340  * from a coordinate system to another. Currently it is possible to convert the following data
  341  * types:
  342  * - Latitude
  343  * - Longitude
  344  * - Altitude
  345  *
  346  * System coordinates source and destination are currently:
  347  * - Coordinate system WGS84
  348  * - Coordinate system PZ90
  349  *
  350  * @note Only conversion from WGS84 coordinate system to PZ90 coordinate system is currently
  351  * supported.
  352  * @note The altitude in coordinate system WGS84 is obtained by le_gnss_GetAltitudeOnWgs84()
  353  * function.
  354  *
  355  * A sample code using le_gnss_ConvertDataCoordinate() function can be seen in the following page:
  356  * - @subpage c_gnssSampleCodePosition
  357  *
  358  * le_gnss_GetDilutionOfPrecision() gets the DOP parameters (Dilution Of Precision) with a
  359  * resolution of 3 decimal places by default. This resolution can be modified by calling the
  360  * @c le_gnss_SetDopResolution() function first.
  361  *
  362  * As @c le_gnss_SetDopResolution() sets the resolution per client session,
  363  * @c le_gnss_SetDopResolution() and @c le_gnss_GetDilutionOfPrecision() functions should be called
  364  * in the same thread or client session.
  365  *
  366  * A sample code can be seen in the following page:
  367  * - @subpage c_gnssSampleCodePosition
  368  *
  369  * The handler can be managed using le_gnss_AddPositionHandler()
  370  * and le_gnss_RemovePositionHandler().
  371  * When a position is computed, the handler is called.
  372  *
  373  * The application has to release each position sample object received by the handler,
  374  * using the le_gnss_ReleaseSampleRef().
  375  *
  376  * A sample code can be seen in the following page:
  377  * - @subpage c_gnssSampleCodePosition
  378  *
  379  * @subsection le_gnss_GetLeapSeconds Get leap seconds event information
  380  * The leap seconds event information is retrieved by calling le_gnss_GetLeapSeconds() API.
  381  * The result includes current GPS time, current leap seconds, next leap second event time,
  382  * and next leap seconds.
  383  *
  384  * Insertion of each UTC leap second is usually decided about six months in advance by the
  385  * International Earth Rotation and Reference Systems Service (IERS).
  386  *
  387  * @section le_gnss_Assisted_GNSS Assisted GNSS
  388  *
  389  * @ref le_gnss_Assisted_GNSS_EE
  390  * @ref le_gnss_Assisted_GNSS_UP
  391  *
  392  * @subsection le_gnss_Assisted_GNSS_EE Server based Extended Ephemeris
  393  *
  394  * @todo Add detailed documentation.
  395  *
  396  * With le_gnss_LoadExtendedEphemerisFile() , you can load an 'Extended Ephemeris' file into
  397  * the GNSS device from the filesystem.
  398  * You have to download the file before loading it.
  399  * @warning Ensure to check that the downloaded file is supported for your specific platform.
  400  *
  401  * With le_gnss_GetExtendedEphemerisValidity(), you will to get the validity of the last injected
  402  * Extended Ephemeris.
  403  *
  404  * You can enable/disable the use of the 'Extended Ephemeris' file into the GNSS device with
  405  * le_gnss_EnableExtendedEphemerisFile() / le_gnss_DisableExtendedEphemerisFile() functions.
  406  * @warning Ensure to check configuration capabilities for your specific platform.
  407  * A reboot must be required if your platform doesn't allow run-time configuration.
  408  *
  409  * A sample code can be seen in the following page:
  410  * - @subpage c_gnssSampleCodeXtra
  411  *
  412  * @subsection le_gnss_Assisted_GNSS_UP 3GPP User Plane (OMA SUPL)
  413  *
  414  * That 3GPP User Plane A-GNSS (Assisted GNSS) protocol is defined by two different standardization
  415  * bodies, 3GPP and Open Mobile Alliance (OMA). For more information, please refer to the standard.
  416  *
  417  * Both MS-Assisted and MS-Based position determination methods are supported in the User Plane.
  418  *
  419  * In MS-Assisted mode, the MS (Mobile Station) measures the signals from the GNSS satellites
  420  *, then returns the retrieved GNSS data to the SUPL (Secure User Plan Location) server, where the
  421  * position calculation is performed.
  422  *
  423  * In MS-Based mode, the MS gets the assistance data from the SUPL (Secure User Plan Location)
  424  * server. The MS measures the signals from the GNSS satellites and makes the position calculation.
  425  *
  426  * The data transport over User Plan is done using the TCP/IP protocol.
  427  *
  428  * The Assisted-GNSS mode can be configured thru the le_gnss_SetSuplAssistedMode() function.
  429  *
  430  * The supported modes are the following:
  431  * - Standalone mode: That 3GPP User Plane A-GNSS feature is deactivated.
  432  * - MS-Based mode
  433  * - MS-Assisted mode
  434  *
  435  * Moreover, the le_gnss_GetSuplAssistedMode() function reads the configured Assisted-GNSS mode.
  436  *
  437  * The SUPL server is configured using the le_gnss_SetSuplServerUrl() function. That function sets
  438  * the SUPL server URL and optionally the port number.
  439  *
  440  * The SUPL certificate to be used in A-GNSS sessions is injected through the
  441  * le_gnss_InjectSuplCertificate() function and deleted through the le_gnss_DeleteSuplCertificate()
  442  * function.
  443  * The SUPL certificate lenght given as parameter to le_gnss_InjectSuplCertificate() must be less
  444  * than LE_GNSS_SUPL_CERTIFICATE_MAX_LEN.
  445  *
  446  * <HR>
  447  *
  448  * Copyright (C) Sierra Wireless Inc.
  449  */
  450 /**
  451  * @page c_gnssSampleCode Sample code for GNSS device
  452  *
  453  * @include "apps/test/positioning/gnssTest/gnssTest/gnssTest.c"
  454  */
  455 /**
  456  * @page c_gnssSampleCodeEnableDisable Sample code for Enable/Disable GNSS device
  457  *
  458  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssEnable
  459  */
  460 /**
  461  * @page c_gnssSampleCodeStartStop Sample code for Start/Stop GNSS device
  462  *
  463  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssControl
  464  */
  465 /**
  466  * @page c_gnssSampleCodeReStart Sample code for restart GNSS device and get TTFF
  467  *
  468  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssReStart
  469  */
  470 /**
  471  * @page c_gnssSampleCodeAcquisitionRate Sample code for GNSS acquisition rate configuration
  472  *
  473  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssControl
  474  */
  475 /**
  476  * @page c_gnssSampleCodeConstellation Sample code for GNSS constellation selection
  477  *
  478  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssControl
  479  */
  480 /**
  481  * @page c_gnssSampleCodeMinElevation Sample code for GNSS minimum elevation
  482  *
  483  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssControl
  484  */
  485 /**
  486  * @page c_gnssSampleCodeNmeaSentences Sample code for GNSS NMEA sentences selection
  487  *
  488  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssControl
  489  */
  490 /**
  491  * @page c_gnssSampleCodePosition Sample code for GNSS position information
  492  *
  493  * @snippet "apps/test/positioning/gnssTest/gnssTest/gnssTest.c" GnssPosition
  494  */
  495 /**
  496  * @page c_gnssSampleCodeXtra Sample code for GNSS Server based Extended Ephemeris
  497  *
  498  * @include "apps/test/positioning/gnssXtraTest/gnssXtraTest/xtraTest.c"
  499  */
  500 /**
  501  * @file le_gnss_interface.h
  502  *
  503  * Legato @ref c_gnss include file.
  504  *
  505  * Copyright (C) Sierra Wireless Inc.
  506  */
  507 
  508 #ifndef LE_GNSS_INTERFACE_H_INCLUDE_GUARD
  509 #define LE_GNSS_INTERFACE_H_INCLUDE_GUARD
  510 
  511 
  512 #include "legato.h"
  513 
  514 // Internal includes for this interface
  515 #include "le_gnss_common.h"
  516 //--------------------------------------------------------------------------------------------------
  517 /**
  518  * Type for handler called when a server disconnects.
  519  */
  520 //--------------------------------------------------------------------------------------------------
  521 typedef void (*le_gnss_DisconnectHandler_t)(void *);
  522 
  523 //--------------------------------------------------------------------------------------------------
  524 /**
  525  *
  526  * Connect the current client thread to the service providing this API. Block until the service is
  527  * available.
  528  *
  529  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  530  * called before any other functions in this API.  Normally, ConnectService is automatically called
  531  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  532  *
  533  * This function is created automatically.
  534  */
  535 //--------------------------------------------------------------------------------------------------
  536 void le_gnss_ConnectService
  537 (
  538     void
  539 );
  540 
  541 //--------------------------------------------------------------------------------------------------
  542 /**
  543  *
  544  * Try to connect the current client thread to the service providing this API. Return with an error
  545  * if the service is not available.
  546  *
  547  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  548  * called before any other functions in this API.  Normally, ConnectService is automatically called
  549  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  550  *
  551  * This function is created automatically.
  552  *
  553  * @return
  554  *  - LE_OK if the client connected successfully to the service.
  555  *  - LE_UNAVAILABLE if the server is not currently offering the service to which the client is
  556  *    bound.
  557  *  - LE_NOT_PERMITTED if the client interface is not bound to any service (doesn't have a binding).
  558  *  - LE_COMM_ERROR if the Service Directory cannot be reached.
  559  */
  560 //--------------------------------------------------------------------------------------------------
  561 le_result_t le_gnss_TryConnectService
  562 (
  563     void
  564 );
  565 
  566 //--------------------------------------------------------------------------------------------------
  567 /**
  568  * Set handler called when server disconnection is detected.
  569  *
  570  * When a server connection is lost, call this handler then exit with LE_FATAL.  If a program wants
  571  * to continue without exiting, it should call longjmp() from inside the handler.
  572  */
  573 //--------------------------------------------------------------------------------------------------
  574 LE_FULL_API void le_gnss_SetServerDisconnectHandler
  575 (
  576     le_gnss_DisconnectHandler_t disconnectHandler,
  577     void *contextPtr
  578 );
  579 
  580 //--------------------------------------------------------------------------------------------------
  581 /**
  582  *
  583  * Disconnect the current client thread from the service providing this API.
  584  *
  585  * Normally, this function doesn't need to be called. After this function is called, there's no
  586  * longer a connection to the service, and the functions in this API can't be used. For details, see
  587  * @ref apiFilesC_client.
  588  *
  589  * This function is created automatically.
  590  */
  591 //--------------------------------------------------------------------------------------------------
  592 void le_gnss_DisconnectService
  593 (
  594     void
  595 );
  596 
  597 
  598 //--------------------------------------------------------------------------------------------------
  599 /**
  600  *  Reference type for dealing with GNSS position samples.
  601  */
  602 //--------------------------------------------------------------------------------------------------
  603 
  604 
  605 //--------------------------------------------------------------------------------------------------
  606 /**
  607  * Enumeration for GNSS device state
  608  */
  609 //--------------------------------------------------------------------------------------------------
  610 
  611 
  612 //--------------------------------------------------------------------------------------------------
  613 /**
  614  *  GNSS fix position states.
  615  */
  616 //--------------------------------------------------------------------------------------------------
  617 
  618 
  619 //--------------------------------------------------------------------------------------------------
  620 /**
  621  *  Resolutions values.
  622  */
  623 //--------------------------------------------------------------------------------------------------
  624 
  625 
  626 //--------------------------------------------------------------------------------------------------
  627 /**
  628  **  Data types.
  629  */
  630 //--------------------------------------------------------------------------------------------------
  631 
  632 
  633 //--------------------------------------------------------------------------------------------------
  634 /**
  635  *  SBAS constellation category
  636  */
  637 //--------------------------------------------------------------------------------------------------
  638 
  639 
  640 //--------------------------------------------------------------------------------------------------
  641 /**
  642  *  GNSS constellation type.
  643  */
  644 //--------------------------------------------------------------------------------------------------
  645 
  646 
  647 //--------------------------------------------------------------------------------------------------
  648 /**
  649  * Assisted-GNSS mode
  650  */
  651 //--------------------------------------------------------------------------------------------------
  652 
  653 
  654 //--------------------------------------------------------------------------------------------------
  655 /**
  656  * Dilution of precision type
  657  */
  658 //--------------------------------------------------------------------------------------------------
  659 
  660 
  661 //--------------------------------------------------------------------------------------------------
  662 /**
  663  * GNSS constellation area type
  664  */
  665 //--------------------------------------------------------------------------------------------------
  666 
  667 
  668 //--------------------------------------------------------------------------------------------------
  669 /**
  670  * GNSS constellation Bit Mask (8 bits) indicating the GNSS constellation(s)
  671  * used in solution.
  672  *
  673  */
  674 //--------------------------------------------------------------------------------------------------
  675 
  676 
  677 //--------------------------------------------------------------------------------------------------
  678 /**
  679  * NMEA sentences Bit Mask indicating the NMEA sentences enabled in the NMEA flow.
  680  *
  681  * @warning The supported NMEA sentences depend on the platform. Please refer to your platform
  682  * documentation for further details.
  683  *
  684  * @note The bit mask values should be coherent with @ref LE_GNSS_NMEA_SENTENCES_MAX
  685  */
  686 //--------------------------------------------------------------------------------------------------
  687 
  688 
  689 //--------------------------------------------------------------------------------------------------
  690 /**
  691  *  Coordinate system
  692  */
  693 //--------------------------------------------------------------------------------------------------
  694 
  695 
  696 //--------------------------------------------------------------------------------------------------
  697 /**
  698  **  Location data types
  699  */
  700 //--------------------------------------------------------------------------------------------------
  701 
  702 
  703 //--------------------------------------------------------------------------------------------------
  704 /**
  705  * Type of GNSS start.
  706  */
  707 //--------------------------------------------------------------------------------------------------
  708 
  709 
  710 //--------------------------------------------------------------------------------------------------
  711 /**
  712  * Handler for position information.
  713  *
  714  */
  715 //--------------------------------------------------------------------------------------------------
  716 
  717 
  718 //--------------------------------------------------------------------------------------------------
  719 /**
  720  * Reference type used by Add/Remove functions for EVENT 'le_gnss_Position'
  721  */
  722 //--------------------------------------------------------------------------------------------------
  723 
  724 
  725 //--------------------------------------------------------------------------------------------------
  726 /**
  727  * Set the GNSS constellation bit mask
  728  *
  729  * @return
  730  *  - LE_FAULT         The function failed.
  731  *  - LE_UNSUPPORTED   If the request is not supported.
  732  *  - LE_NOT_PERMITTED If the GNSS device is not initialized, disabled or active.
  733  *  - LE_OK            The function succeeded.
  734  *
  735  * @warning Some constellation types are unsupported depending on the platform. Please refer to
  736  *          @ref platformConstraintsGnss_ConstellationType section for full details.
  737  *
  738  * @warning The settings are platform dependent. Please refer to
  739  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
  740  */
  741 //--------------------------------------------------------------------------------------------------
  742 le_result_t le_gnss_SetConstellation
  743 (
  744     le_gnss_ConstellationBitMask_t constellationMask
  745         ///< [IN] GNSS constellation used in solution.
  746 );
  747 
  748 //--------------------------------------------------------------------------------------------------
  749 /**
  750  * Get the GNSS constellation bit mask
  751  *
  752  * @return
  753  *  - LE_OK on success
  754  *  - LE_FAULT on failure
  755  *
  756  * @note If the caller is passing a null pointer into this function, it is a fatal error, the
  757  *       function will not return.
  758  */
  759 //--------------------------------------------------------------------------------------------------
  760 le_result_t le_gnss_GetConstellation
  761 (
  762     le_gnss_ConstellationBitMask_t* constellationMaskPtr
  763         ///< [OUT] GNSS constellation used in solution.
  764 );
  765 
  766 //--------------------------------------------------------------------------------------------------
  767 /**
  768  * Set the area for the GNSS constellation
  769  *
  770  * @return
  771  *  - LE_OK            The function succeeded.
  772  *  - LE_FAULT         The function failed.
  773  *  - LE_UNSUPPORTED   If the request is not supported.
  774  *  - LE_NOT_PERMITTED If the GNSS device is not initialized, disabled or active.
  775  *  - LE_BAD_PARAMETER Invalid constellation area.
  776  *
  777  * @warning The settings are platform dependent. Please refer to
  778  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
  779  */
  780 //--------------------------------------------------------------------------------------------------
  781 le_result_t le_gnss_SetConstellationArea
  782 (
  783     le_gnss_Constellation_t satConstellation,
  784         ///< [IN] GNSS constellation type.
  785     le_gnss_ConstellationArea_t constellationArea
  786         ///< [IN] GNSS constellation area.
  787 );
  788 
  789 //--------------------------------------------------------------------------------------------------
  790 /**
  791  * Get the area for the GNSS constellation
  792  *
  793  * @return
  794  *  - LE_OK            On success
  795  *  - LE_FAULT         On failure
  796  *  - LE_UNSUPPORTED   Request not supported
  797  *  - LE_NOT_PERMITTED If the GNSS device is not initialized, disabled or active.
  798  *
  799  * @note If the caller is passing a null pointer into this function, it is a fatal error, the
  800  *       function will not return.
  801  */
  802 //--------------------------------------------------------------------------------------------------
  803 le_result_t le_gnss_GetConstellationArea
  804 (
  805     le_gnss_Constellation_t satConstellation,
  806         ///< [IN] GNSS constellation type.
  807     le_gnss_ConstellationArea_t* constellationAreaPtr
  808         ///< [OUT] GNSS constellation area.
  809 );
  810 
  811 //--------------------------------------------------------------------------------------------------
  812 /**
  813  * This function enables the use of the 'Extended Ephemeris' file into the GNSS device.
  814  *
  815  * @return
  816  *  - LE_FAULT         The function failed.
  817  *  - LE_OK            The function succeeded.
  818  *
  819  * @warning The settings are platform dependent. Please refer to
  820  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
  821  */
  822 //--------------------------------------------------------------------------------------------------
  823 le_result_t le_gnss_EnableExtendedEphemerisFile
  824 (
  825     void
  826 );
  827 
  828 //--------------------------------------------------------------------------------------------------
  829 /**
  830  * This function disables the use of the 'Extended Ephemeris' file into the GNSS device.
  831  *
  832  * @return
  833  *  - LE_FAULT         The function failed.
  834  *  - LE_OK            The function succeeded.
  835  *
  836  * @warning The settings are platform dependent. Please refer to
  837  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
  838  */
  839 //--------------------------------------------------------------------------------------------------
  840 le_result_t le_gnss_DisableExtendedEphemerisFile
  841 (
  842     void
  843 );
  844 
  845 //--------------------------------------------------------------------------------------------------
  846 /**
  847  * This function must be called to load an 'Extended Ephemeris' file into the GNSS device.
  848  *
  849  * @return
  850  *  - LE_FAULT         The function failed to inject the 'Extended Ephemeris' file.
  851  *  - LE_TIMEOUT       A time-out occurred.
  852  *  - LE_FORMAT_ERROR  'Extended Ephemeris' file format error.
  853  *  - LE_OK            The function succeeded.
  854  *
  855  */
  856 //--------------------------------------------------------------------------------------------------
  857 le_result_t le_gnss_LoadExtendedEphemerisFile
  858 (
  859     int fd
  860         ///< [IN] Extended ephemeris file descriptor
  861 );
  862 
  863 //--------------------------------------------------------------------------------------------------
  864 /**
  865  * This function must be called to get the validity of the last injected Extended Ephemeris.
  866  *
  867  * @return
  868  *  - LE_FAULT         The function failed to get the validity
  869  *  - LE_OK            The function succeeded.
  870  *
  871  * @note If the caller is passing an invalid Position sample reference or null pointers into this
  872  *       function, it is a fatal error, the function will not return.
  873  */
  874 //--------------------------------------------------------------------------------------------------
  875 le_result_t le_gnss_GetExtendedEphemerisValidity
  876 (
  877     uint64_t* startTimePtr,
  878         ///< [OUT] Start time in seconds (since Jan. 1, 1970)
  879     uint64_t* stopTimePtr
  880         ///< [OUT] Stop time in seconds (since Jan. 1, 1970)
  881 );
  882 
  883 //--------------------------------------------------------------------------------------------------
  884 /**
  885  * This function must be called to inject the UTC time into the GNSS device.
  886  *
  887  * @return
  888  *  - LE_OK            The function succeeded.
  889  *  - LE_FAULT         The function failed to inject the UTC time.
  890  *  - LE_TIMEOUT       A time-out occurred.
  891  *
  892  * @note It is mandatory to enable the 'Extended Ephemeris' file injection into the GNSS device with
  893  * le_gnss_EnableExtendedEphemerisFile() before injecting time with this API.
  894  */
  895 //--------------------------------------------------------------------------------------------------
  896 le_result_t le_gnss_InjectUtcTime
  897 (
  898     uint64_t timeUtc,
  899         ///< [IN] [IN] UTC time since Jan. 1, 1970 in milliseconds
  900     uint32_t timeUnc
  901         ///< [IN] [IN] Time uncertainty in milliseconds
  902 );
  903 
  904 //--------------------------------------------------------------------------------------------------
  905 /**
  906  * This function starts the GNSS device.
  907  *
  908  * @return
  909  *  - LE_FAULT         The function failed.
  910  *  - LE_DUPLICATE     If the GNSS device is already started.
  911  *  - LE_NOT_PERMITTED If the GNSS device is not initialized or disabled.
  912  *  - LE_OK            The function succeeded.
  913  *
  914  */
  915 //--------------------------------------------------------------------------------------------------
  916 le_result_t le_gnss_Start
  917 (
  918     void
  919 );
  920 
  921 //--------------------------------------------------------------------------------------------------
  922 /**
  923  * This function starts the GNSS device in the specified start mode.
  924  *
  925  * @return
  926  *  - LE_OK              The function succeeded.
  927  *  - LE_BAD_PARAMETER   Invalid start mode
  928  *  - LE_FAULT           The function failed.
  929  *  - LE_DUPLICATE       If the GNSS device is already started.
  930  *  - LE_NOT_PERMITTED   If the GNSS device is not initialized or disabled.
  931  *
  932  * @warning This function may be subject to limitations depending on the platform. Please refer to
  933  *          the @ref platformConstraintsGnss page.
  934  */
  935 //--------------------------------------------------------------------------------------------------
  936 le_result_t le_gnss_StartMode
  937 (
  938     le_gnss_StartMode_t mode
  939         ///< [IN] [IN] Start mode
  940 );
  941 
  942 //--------------------------------------------------------------------------------------------------
  943 /**
  944  * This function stops the GNSS device.
  945  *
  946  * @return
  947  *  - LE_FAULT         The function failed.
  948  *  - LE_DUPLICATE     If the GNSS device is already stopped.
  949  *  - LE_NOT_PERMITTED If the GNSS device is not initialized or disabled.
  950  *  - LE_OK            The function succeeded.
  951  *
  952  */
  953 //--------------------------------------------------------------------------------------------------
  954 le_result_t le_gnss_Stop
  955 (
  956     void
  957 );
  958 
  959 //--------------------------------------------------------------------------------------------------
  960 /**
  961  * This function performs a "HOT" restart of the GNSS device.
  962  *
  963  * @return
  964  *  - LE_FAULT         The function failed.
  965  *  - LE_NOT_PERMITTED If the GNSS device is not enabled or not started.
  966  *  - LE_OK            The function succeeded.
  967  *
  968  * @Note This API can be used to restart the GNSS device. It is equivalent calling le_gnss_Stop()
  969  *       and le_gnss_Start().
  970  */
  971 //--------------------------------------------------------------------------------------------------
  972 le_result_t le_gnss_ForceHotRestart
  973 (
  974     void
  975 );
  976 
  977 //--------------------------------------------------------------------------------------------------
  978 /**
  979  * This function performs a "WARM" restart of the GNSS device.
  980  *
  981  * @return
  982  *  - LE_FAULT         The function failed.
  983  *  - LE_NOT_PERMITTED If the GNSS device is not enabled or not started.
  984  *  - LE_OK            The function succeeded.
  985  *
  986  * @Note This API has a platform dependent feature. Please refer to
  987  * @ref platformConstraintsGnss_WarmRestart for further details.
  988  */
  989 //--------------------------------------------------------------------------------------------------
  990 le_result_t le_gnss_ForceWarmRestart
  991 (
  992     void
  993 );
  994 
  995 //--------------------------------------------------------------------------------------------------
  996 /**
  997  * This function performs a "COLD" restart of the GNSS device.
  998  *
  999  * @return
 1000  *  - LE_FAULT         The function failed.
 1001  *  - LE_NOT_PERMITTED If the GNSS device is not enabled or not started.
 1002  *  - LE_OK            The function succeeded.
 1003  *
 1004  */
 1005 //--------------------------------------------------------------------------------------------------
 1006 le_result_t le_gnss_ForceColdRestart
 1007 (
 1008     void
 1009 );
 1010 
 1011 //--------------------------------------------------------------------------------------------------
 1012 /**
 1013  * This function performs a "FACTORY" restart of the GNSS device.
 1014  *
 1015  * @return
 1016  *  - LE_FAULT         The function failed.
 1017  *  - LE_NOT_PERMITTED If the GNSS device is not enabled or not started.
 1018  *  - LE_OK            The function succeeded.
 1019  *
 1020  */
 1021 //--------------------------------------------------------------------------------------------------
 1022 le_result_t le_gnss_ForceFactoryRestart
 1023 (
 1024     void
 1025 );
 1026 
 1027 //--------------------------------------------------------------------------------------------------
 1028 /**
 1029  * Get the TTFF in milliseconds
 1030  *
 1031  * @return
 1032  *  - LE_BUSY          The position is not fixed and TTFF can't be measured.
 1033  *  - LE_NOT_PERMITTED If the GNSS device is not enabled or not started.
 1034  *  - LE_OK            Function succeeded.
 1035  *  - LE_FAULT         If there are some other errors.
 1036  *
 1037  * @note If the caller is passing a null pointer into this function, it is a fatal error, the
 1038  *       function will not return.
 1039  */
 1040 //--------------------------------------------------------------------------------------------------
 1041 le_result_t le_gnss_GetTtff
 1042 (
 1043     uint32_t* ttffPtr
 1044         ///< [OUT] TTFF in milliseconds
 1045 );
 1046 
 1047 //--------------------------------------------------------------------------------------------------
 1048 /**
 1049  * This function enables the GNSS device.
 1050  *
 1051  * @return
 1052  *  - LE_FAULT         The function failed.
 1053  *  - LE_DUPLICATE     If the GNSS device is already enabled.
 1054  *  - LE_NOT_PERMITTED If the GNSS device is not initialized.
 1055  *  - LE_OK            The function succeeded.
 1056  *
 1057  * @warning The settings are platform dependent. Please refer to
 1058  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
 1059  */
 1060 //--------------------------------------------------------------------------------------------------
 1061 le_result_t le_gnss_Enable
 1062 (
 1063     void
 1064 );
 1065 
 1066 //--------------------------------------------------------------------------------------------------
 1067 /**
 1068  * This function disables the GNSS device.
 1069  *
 1070  * @return
 1071  *  - LE_FAULT         The function failed.
 1072  *  - LE_DUPLICATE     If the GNSS device is already disabled.
 1073  *  - LE_NOT_PERMITTED If the GNSS device is not initialized or started.
 1074  *  - LE_OK            The function succeeded.
 1075  *
 1076  * @warning The settings are platform dependent. Please refer to
 1077  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
 1078  */
 1079 //--------------------------------------------------------------------------------------------------
 1080 le_result_t le_gnss_Disable
 1081 (
 1082     void
 1083 );
 1084 
 1085 //--------------------------------------------------------------------------------------------------
 1086 /**
 1087  * This function sets the GNSS device acquisition rate.
 1088  *
 1089  * @return
 1090  *  - LE_OK on success
 1091  *  - LE_FAULT on failure
 1092  *  - LE_UNSUPPORTED request not supported
 1093  *  - LE_TIMEOUT a time-out occurred
 1094  *  - LE_NOT_PERMITTED If the GNSS device is not in "ready" state.
 1095  *  - LE_OUT_OF_RANGE  if acquisition rate value is equal to zero
 1096  *
 1097  * @warning This function may be subject to limitations depending on the platform. Please refer to
 1098  *          the @ref platformConstraintsGnss page.
 1099  *
 1100  * @warning The settings are platform dependent. Please refer to
 1101  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
 1102  */
 1103 //--------------------------------------------------------------------------------------------------
 1104 le_result_t le_gnss_SetAcquisitionRate
 1105 (
 1106     uint32_t rate
 1107         ///< [IN] Acquisition rate in milliseconds.
 1108 );
 1109 
 1110 //--------------------------------------------------------------------------------------------------
 1111 /**
 1112  * This function gets the GNSS device acquisition rate.
 1113  *
 1114  * @return
 1115  *  - LE_OK on success
 1116  *  - LE_FAULT on failure
 1117  *  - LE_NOT_PERMITTED If the GNSS device is not in "ready" state.
 1118  *
 1119  * @note If the caller is passing a null pointer into this function, it is a fatal error, the
 1120  *       function will not return.
 1121  */
 1122 //--------------------------------------------------------------------------------------------------
 1123 le_result_t le_gnss_GetAcquisitionRate
 1124 (
 1125     uint32_t* ratePtr
 1126         ///< [OUT] Acquisition rate in milliseconds.
 1127 );
 1128 
 1129 //--------------------------------------------------------------------------------------------------
 1130 /**
 1131  * Add handler function for EVENT 'le_gnss_Position'
 1132  *
 1133  * This event provides information on position.
 1134  *
 1135  *  - A handler reference, which is only needed for later removal of the handler.
 1136  *
 1137  * @note Doesn't return on failure, so there's no need to check the return value for errors.
 1138  */
 1139 //--------------------------------------------------------------------------------------------------
 1140 le_gnss_PositionHandlerRef_t le_gnss_AddPositionHandler
 1141 (
 1142     le_gnss_PositionHandlerFunc_t handlerPtr,
 1143         ///< [IN]
 1144     void* contextPtr
 1145         ///< [IN]
 1146 );
 1147 
 1148 //--------------------------------------------------------------------------------------------------
 1149 /**
 1150  * Remove handler function for EVENT 'le_gnss_Position'
 1151  */
 1152 //--------------------------------------------------------------------------------------------------
 1153 void le_gnss_RemovePositionHandler
 1154 (
 1155     le_gnss_PositionHandlerRef_t handlerRef
 1156         ///< [IN]
 1157 );
 1158 
 1159 //--------------------------------------------------------------------------------------------------
 1160 /**
 1161  * This function gets the position sample's fix state
 1162  *
 1163  *  - LE_OK on success
 1164  *  - LE_FAULT on failure
 1165  *
 1166  * @note If the caller is passing an invalid Position sample reference or a null pointer into this
 1167  *       function, it is a fatal error, the function will not return.
 1168  */
 1169 //--------------------------------------------------------------------------------------------------
 1170 le_result_t le_gnss_GetPositionState
 1171 (
 1172     le_gnss_SampleRef_t positionSampleRef,
 1173         ///< [IN] Position sample's reference.
 1174     le_gnss_FixState_t* statePtr
 1175         ///< [OUT] Position fix state.
 1176 );
 1177 
 1178 //--------------------------------------------------------------------------------------------------
 1179 /**
 1180  * Get the location's data (Latitude, Longitude, Horizontal accuracy).
 1181  *
 1182  * @return
 1183  *  - LE_FAULT         Function failed to get the location's data
 1184  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is invalid (set to INT32_MAX).
 1185  *  - LE_OK            Function succeeded.
 1186  *
 1187  * @note latitudePtr, longitudePtr and hAccuracyPtr can be set to NULL if not needed.
 1188  *
 1189  * @note The latitude and longitude values are based on the WGS84 standard coordinate system.
 1190  *
 1191  * @note The latitude and longitude values are given in degrees with 6 decimal places like:
 1192  *       Latitude +48858300 = 48.858300 degrees North
 1193  *       Longitude +2294400 = 2.294400 degrees East
 1194  *       (The latitude and longitude values are given in degrees, minutes, seconds in NMEA frame)
 1195  *
 1196  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1197  *       valid. Please compare them with INT32_MAX.
 1198  *
 1199  * @note If the caller is passing an invalid Position sample reference into this function,
 1200  *       it is a fatal error, the function will not return.
 1201  */
 1202 //--------------------------------------------------------------------------------------------------
 1203 le_result_t le_gnss_GetLocation
 1204 (
 1205     le_gnss_SampleRef_t positionSampleRef,
 1206         ///< [IN] Position sample's reference.
 1207     int32_t* latitudePtr,
 1208         ///< [OUT] WGS84 Latitude in degrees, positive North [resolution 1e-6].
 1209     int32_t* longitudePtr,
 1210         ///< [OUT] WGS84 Longitude in degrees, positive East [resolution 1e-6].
 1211     int32_t* hAccuracyPtr
 1212         ///< [OUT] Horizontal position's accuracy in meters [resolution 1e-2].
 1213 );
 1214 
 1215 //--------------------------------------------------------------------------------------------------
 1216 /**
 1217  * Get the position sample's altitude.
 1218  *
 1219  * @return
 1220  *  - LE_FAULT         Function failed to get the altitude. Invalid Position reference provided.
 1221  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is invalid (set to INT32_MAX).
 1222  *  - LE_OK            Function succeeded.
 1223  *
 1224  * @note Altitude is in meters, above Mean Sea Level, with 3 decimal places (3047 = 3.047 meters).
 1225  *
 1226  * @note For a 2D position fix, the altitude will be indicated as invalid and set to INT32_MAX
 1227  *
 1228  * @note Vertical position accuracy is default set to meters with 1 decimal place (3047 = 3.0
 1229  *       meters). To change its accuracy, call the @c le_gnss_SetDataResolution() function. Vertical
 1230  *       position accuracy is set as data type and accuracy from 0 to 3 decimal place is set as
 1231  *       resolution.
 1232  *
 1233  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1234  *       valid. Please compare them with INT32_MAX.
 1235  *
 1236  * @note If the caller is passing an invalid Position reference into this function,
 1237  *       it is a fatal error, the function will not return.
 1238  *
 1239  * @note altitudePtr, altitudeAccuracyPtr can be set to NULL if not needed.
 1240  */
 1241 //--------------------------------------------------------------------------------------------------
 1242 le_result_t le_gnss_GetAltitude
 1243 (
 1244     le_gnss_SampleRef_t positionSampleRef,
 1245         ///< [IN] Position sample's reference.
 1246     int32_t* altitudePtr,
 1247         ///< [OUT] Altitude in meters, above Mean Sea Level [resolution 1e-3].
 1248     int32_t* vAccuracyPtr
 1249         ///< [OUT] Vertical position's accuracy in meters.
 1250 );
 1251 
 1252 //--------------------------------------------------------------------------------------------------
 1253 /**
 1254  * Get the position sample's time.
 1255  *
 1256  * @return
 1257  *  - LE_FAULT         Function failed to get the time.
 1258  *  - LE_OUT_OF_RANGE  The retrieved time is invalid (all fields are set to 0).
 1259  *  - LE_OK            Function succeeded.
 1260  *
 1261  * @note If the caller is passing an invalid Position sample reference or null pointers into this
 1262  *       function, it is a fatal error, the function will not return.
 1263  *
 1264  */
 1265 //--------------------------------------------------------------------------------------------------
 1266 le_result_t le_gnss_GetTime
 1267 (
 1268     le_gnss_SampleRef_t positionSampleRef,
 1269         ///< [IN] Position sample's reference.
 1270     uint16_t* hoursPtr,
 1271         ///< [OUT] UTC Hours into the day [range 0..23].
 1272     uint16_t* minutesPtr,
 1273         ///< [OUT] UTC Minutes into the hour [range 0..59].
 1274     uint16_t* secondsPtr,
 1275         ///< [OUT] UTC Seconds into the minute [range 0..59].
 1276     uint16_t* millisecondsPtr
 1277         ///< [OUT] UTC Milliseconds into the second [range 0..999].
 1278 );
 1279 
 1280 //--------------------------------------------------------------------------------------------------
 1281 /**
 1282  * Get the position sample's GPS time.
 1283  *
 1284  * @return
 1285  *  - LE_FAULT         Function failed to get the time.
 1286  *  - LE_OUT_OF_RANGE  The retrieved time is invalid (all fields are set to 0).
 1287  *  - LE_OK            Function succeeded.
 1288  *
 1289  * @note If the caller is passing an invalid Position sample reference or null pointers into this
 1290  *       function, it is a fatal error, the function will not return.
 1291  */
 1292 //--------------------------------------------------------------------------------------------------
 1293 le_result_t le_gnss_GetGpsTime
 1294 (
 1295     le_gnss_SampleRef_t positionSampleRef,
 1296         ///< [IN] Position sample's reference.
 1297     uint32_t* gpsWeekPtr,
 1298         ///< [OUT] GPS week number from midnight, Jan. 6, 1980.
 1299     uint32_t* gpsTimeOfWeekPtr
 1300         ///< [OUT] Amount of time in milliseconds into the GPS week.
 1301 );
 1302 
 1303 //--------------------------------------------------------------------------------------------------
 1304 /**
 1305  *  Get the position sample's epoch time.
 1306  *
 1307  * @return
 1308  *  - LE_FAULT         Function failed to acquire the epoch time.
 1309  *  - LE_OK            Function succeeded.
 1310  *  - LE_OUT_OF_RANGE  The retrieved time is invalid (all fields are set to 0).
 1311  *
 1312  * @note The epoch time is the number of seconds elapsed since January 1, 1970
 1313  *       (midnight UTC/GMT), not counting leaps seconds.
 1314  *
 1315  * @note If the caller is passing an invalid position sample reference or a null pointer into this
 1316  *       function, it is a fatal error, the function will not return.
 1317  */
 1318 //--------------------------------------------------------------------------------------------------
 1319 le_result_t le_gnss_GetEpochTime
 1320 (
 1321     le_gnss_SampleRef_t positionSampleRef,
 1322         ///< [IN] Position sample's reference.
 1323     uint64_t* millisecondsPtr
 1324         ///< [OUT] Milliseconds since Jan. 1, 1970.
 1325 );
 1326 
 1327 //--------------------------------------------------------------------------------------------------
 1328 /**
 1329  * Get the position sample's time accurary.
 1330  *
 1331  * @return
 1332  *  - LE_FAULT         Function failed to get the time.
 1333  *  - LE_OUT_OF_RANGE  The retrieved time accuracy is invalid (set to UINT16_MAX).
 1334  *  - LE_OK            Function succeeded.
 1335  *
 1336  * @note If the caller is passing an invalid position sample reference or a null pointer into this
 1337  *       function, it is a fatal error, the function will not return.
 1338  */
 1339 //--------------------------------------------------------------------------------------------------
 1340 le_result_t le_gnss_GetTimeAccuracy
 1341 (
 1342     le_gnss_SampleRef_t positionSampleRef,
 1343         ///< [IN] Position sample's reference.
 1344     uint32_t* timeAccuracyPtr
 1345         ///< [OUT] Estimated time accuracy in nanoseconds
 1346 );
 1347 
 1348 //--------------------------------------------------------------------------------------------------
 1349 /**
 1350  * Get the position sample's UTC leap seconds in advance
 1351  *
 1352  * @return
 1353  *  - LE_FAULT         Function failed to get the leap seconds.
 1354  *  - LE_OUT_OF_RANGE  The retrieved time accuracy is invalid (set to UINT8_MAX).
 1355  *  - LE_OK            Function succeeded.
 1356  *
 1357  * @note The leap seconds in advance is the accumulated time in seconds since the start of GPS Epoch
 1358  * time (Jan 6, 1980). This value has to be added to the UTC time (since Jan. 1, 1970)
 1359  *
 1360  * @note Insertion of each UTC leap second is usually decided about six months in advance by the
 1361  * International Earth Rotation and Reference Systems Service (IERS).
 1362  *
 1363  * @note If the caller is passing an invalid position sample reference or a null pointer into this
 1364  *       function, it is a fatal error, the function will not return.
 1365  *
 1366  * @deprecated This function is deprecated, le_gnss_GetLeapSeconds should be used instead.
 1367  */
 1368 //--------------------------------------------------------------------------------------------------
 1369 le_result_t le_gnss_GetGpsLeapSeconds
 1370 (
 1371     le_gnss_SampleRef_t positionSampleRef,
 1372         ///< [IN] Position sample's reference.
 1373     uint8_t* leapSecondsPtr
 1374         ///< [OUT] UTC leap seconds in advance in seconds
 1375 );
 1376 
 1377 //--------------------------------------------------------------------------------------------------
 1378 /**
 1379  * Get leap seconds information.
 1380  *
 1381  * @return
 1382  *  - LE_OK            Function succeeded.
 1383  *  - LE_FAULT         Function failed to get the data.
 1384  *  - LE_TIMEOUT       Timeout occured.
 1385  *  - LE_UNSUPPORTED   Not supported on this platform.
 1386  *
 1387  * @note Insertion of each UTC leap second is usually decided about six months in advance by the
 1388  * International Earth Rotation and Reference Systems Service (IERS).
 1389  *
 1390  * @note If the caller is passing a null pointer into this function, it is considered a fatal
 1391  * error and the function will not return.
 1392  *
 1393  * @note If the return value of a parameter is INT32_MAX/UINT64_MAX, the parameter is not valid.
 1394  */
 1395 //--------------------------------------------------------------------------------------------------
 1396 le_result_t le_gnss_GetLeapSeconds
 1397 (
 1398     uint64_t* gpsTimePtr,
 1399         ///< [OUT] The number of milliseconds of GPS time since midnight,
 1400         ///< Jan. 6, 1980.
 1401     int32_t* currentLeapSecondsPtr,
 1402         ///< [OUT] Current UTC leap seconds value in milliseconds.
 1403     uint64_t* changeEventTimePtr,
 1404         ///< [OUT] The number of milliseconds since midnight, Jan. 6, 1980
 1405         ///< to the next leap seconds change event.
 1406     int32_t* nextLeapSecondsPtr
 1407         ///< [OUT] UTC leap seconds value to be applied at the change
 1408         ///< event time in milliseconds.
 1409 );
 1410 
 1411 //--------------------------------------------------------------------------------------------------
 1412 /**
 1413  * Get the position sample's date.
 1414  *
 1415  * @return
 1416  *  - LE_FAULT         Function failed to get the date.
 1417  *  - LE_OUT_OF_RANGE  The retrieved date is invalid (all fields are set to 0).
 1418  *  - LE_OK            Function succeeded.
 1419  *
 1420  * @note If the caller is passing an invalid Position sample reference or null pointers into this
 1421  *       function, it is a fatal error, the function will not return.
 1422  */
 1423 //--------------------------------------------------------------------------------------------------
 1424 le_result_t le_gnss_GetDate
 1425 (
 1426     le_gnss_SampleRef_t positionSampleRef,
 1427         ///< [IN] Position sample's reference.
 1428     uint16_t* yearPtr,
 1429         ///< [OUT] UTC Year A.D. [e.g. 2014].
 1430     uint16_t* monthPtr,
 1431         ///< [OUT] UTC Month into the year [range 1...12].
 1432     uint16_t* dayPtr
 1433         ///< [OUT] UTC Days into the month [range 1...31].
 1434 );
 1435 
 1436 //--------------------------------------------------------------------------------------------------
 1437 /**
 1438  * Get the position sample's horizontal speed.
 1439  *
 1440  *  - LE_FAULT         Function failed to find the positionSample.
 1441  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is invalid (set to UINT32_MAX).
 1442  *  - LE_OK            Function succeeded.
 1443  *
 1444  * @note hSpeedPtr, hSpeedAccuracyPtr can be set to NULL if not needed.
 1445  *
 1446  * @note Horizontal speed is in meters/second with 2 decimal places (3047 = 30.47 meters/second).
 1447  *
 1448  * @note Horizontal speed accuracy estimate is default set to meters/second with 1 decimal place
 1449  *       (304 = 30.4 meters/second). To change its accuracy, call the @c le_gnss_SetDataResolution()
 1450  *       function. Horizontal speed accuracy estimate is set as data type and accuracy from 0 to 3
 1451  *       decimal place is set as resolution.
 1452  *
 1453  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1454  *       valid. Please compare them with UINT32_MAX.
 1455  *
 1456  * @note If the caller is passing an invalid Position sample reference into this function,
 1457  *       it is a fatal error, the function will not return.
 1458  *
 1459  * @warning The Horizontal speed accuracy is platform dependent. Please refer to
 1460  *          @ref platformConstraintsGnss_speedAccuracies section for full details.
 1461  */
 1462 //--------------------------------------------------------------------------------------------------
 1463 le_result_t le_gnss_GetHorizontalSpeed
 1464 (
 1465     le_gnss_SampleRef_t positionSampleRef,
 1466         ///< [IN] Position sample's reference.
 1467     uint32_t* hspeedPtr,
 1468         ///< [OUT] Horizontal speed in meters/second [resolution 1e-2].
 1469     uint32_t* hspeedAccuracyPtr
 1470         ///< [OUT] Horizontal speed's accuracy estimate in meters/second.
 1471 );
 1472 
 1473 //--------------------------------------------------------------------------------------------------
 1474 /**
 1475  * Get the position sample's vertical speed.
 1476  *
 1477  * @return
 1478  *  - LE_FAULT         The function failed to find the positionSample.
 1479  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is not valid (set to INT32_MAX).
 1480  *  - LE_OK            The function succeeded.
 1481  *
 1482  * @note vSpeedPtr, vSpeedAccuracyPtr can be set to NULL if not needed.
 1483  *
 1484  * @note For a 2D position Fix, the vertical speed will be indicated as invalid
 1485  * and set to INT32_MAX.
 1486  *
 1487  * @note Vertical speed accuracy estimate is default set to meters/second with 1 decimal place
 1488  *       (304 = 30.4 meters/second). To change its accuracy, call the @c le_gnss_SetDataResolution()
 1489  *       function. Vertical speed accuracy estimate is set as data type and accuracy from 0 to 3
 1490  *       decimal place is set as resolution.
 1491  *
 1492  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1493  *       valid. Please compare them with INT32_MAX.
 1494  *
 1495  * @note If the caller is passing an invalid Position sample reference into this function,
 1496  *       it is a fatal error, the function will not return.
 1497  *
 1498  * @warning The Vertical speed accuracy is platform dependent. Please refer to
 1499  *          @ref platformConstraintsGnss_speedAccuracies section for full details.
 1500  */
 1501 //--------------------------------------------------------------------------------------------------
 1502 le_result_t le_gnss_GetVerticalSpeed
 1503 (
 1504     le_gnss_SampleRef_t positionSampleRef,
 1505         ///< [IN] Position sample's reference.
 1506     int32_t* vspeedPtr,
 1507         ///< [OUT] Vertical speed in meters/second [resolution 1e-2],
 1508         ///< positive up.
 1509     int32_t* vspeedAccuracyPtr
 1510         ///< [OUT] Vertical speed's accuracy estimate in meters/second.
 1511 );
 1512 
 1513 //--------------------------------------------------------------------------------------------------
 1514 /**
 1515  * Get the position sample's direction. Direction of movement is the direction that the vehicle or
 1516  * person is actually moving.
 1517  *
 1518  * @return
 1519  *  - LE_FAULT         Function failed to find the positionSample.
 1520  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is invalid (set to UINT32_MAX).
 1521  *  - LE_OK            Function succeeded.
 1522  *
 1523  * @note Direction and direction accuracy are given in degrees with 1 decimal place: 1755 = 175.5
 1524  *       degrees.
 1525  *       Direction ranges from 0 to 359.9 degrees, where 0 is True North.
 1526  *
 1527  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1528  *       valid. Please compare them with UINT32_MAX.
 1529  *
 1530  * @note directionPtr, directionAccuracyPtr can be set to NULL if not needed.
 1531  *
 1532  * @note If the caller is passing an invalid Position sample reference into this function,
 1533  *       it is a fatal error, the function will not return.
 1534  */
 1535 //--------------------------------------------------------------------------------------------------
 1536 le_result_t le_gnss_GetDirection
 1537 (
 1538     le_gnss_SampleRef_t positionSampleRef,
 1539         ///< [IN] Position sample's reference.
 1540     uint32_t* directionPtr,
 1541         ///< [OUT] Direction in degrees [resolution 1e-1].
 1542         ///< Range: 0 to 359.9, where 0 is True North
 1543     uint32_t* directionAccuracyPtr
 1544         ///< [OUT] Direction's accuracy estimate
 1545         ///< in degrees [resolution 1e-1].
 1546 );
 1547 
 1548 //--------------------------------------------------------------------------------------------------
 1549 /**
 1550  * Get the Satellites Vehicle information.
 1551  *
 1552  * @return
 1553  *  - LE_FAULT         Function failed to find the positionSample.
 1554  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is invalid.
 1555  *  - LE_OK            Function succeeded.
 1556  *
 1557  * @note satId[] can be set to 0 if that information list index is not configured, so
 1558  * all satellite parameters (satConst[], satSnr[],satAzim[], satElev[]) are fixed to 0.
 1559  *
 1560  * @note For LE_OUT_OF_RANGE returned code, invalid value depends on field type:
 1561  * UINT16_MAX for satId, LE_GNSS_SV_CONSTELLATION_UNDEFINED for satConst, false for satUsed,
 1562  * UINT8_MAX for satSnr, UINT16_MAX for satAzim, UINT8_MAX for satElev.
 1563  *
 1564  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1565  *       valid.
 1566  *
 1567  * @note If the caller is passing an invalid Position sample reference into this function,
 1568  *       it is a fatal error, the function will not return.
 1569  */
 1570 //--------------------------------------------------------------------------------------------------
 1571 le_result_t le_gnss_GetSatellitesInfo
 1572 (
 1573     le_gnss_SampleRef_t positionSampleRef,
 1574         ///< [IN] Position sample's reference.
 1575     uint16_t* satIdPtr,
 1576         ///< [OUT] Satellites in View ID number, referring
 1577         ///< to NMEA standard.
 1578     size_t* satIdSizePtr,
 1579         ///< [INOUT]
 1580     le_gnss_Constellation_t* satConstPtr,
 1581         ///< [OUT] GNSS constellation type.
 1582     size_t* satConstSizePtr,
 1583         ///< [INOUT]
 1584     bool* satUsedPtr,
 1585         ///< [OUT] TRUE if satellite in View Used
 1586         ///< for Navigation.
 1587     size_t* satUsedSizePtr,
 1588         ///< [INOUT]
 1589     uint8_t* satSnrPtr,
 1590         ///< [OUT] Satellites in View Signal To
 1591         ///< Noise Ratio (C/No) [dBHz].
 1592     size_t* satSnrSizePtr,
 1593         ///< [INOUT]
 1594     uint16_t* satAzimPtr,
 1595         ///< [OUT] Satellites in View Azimuth [degrees].
 1596         ///< Range: 0 to 360
 1597         ///< If Azimuth angle is currently unknown,
 1598         ///< the value is set to UINT16_MAX.
 1599     size_t* satAzimSizePtr,
 1600         ///< [INOUT]
 1601     uint8_t* satElevPtr,
 1602         ///< [OUT] Satellites in View Elevation [degrees].
 1603         ///< Range: 0 to 90
 1604         ///< If Elevation angle is currently unknown,
 1605         ///< the value is set to UINT8_MAX.
 1606     size_t* satElevSizePtr
 1607         ///< [INOUT]
 1608 );
 1609 
 1610 //--------------------------------------------------------------------------------------------------
 1611 /**
 1612  * Get the SBAS constellation category given the SBAS satellite number ID.
 1613  *
 1614  */
 1615 //--------------------------------------------------------------------------------------------------
 1616 le_gnss_SbasConstellationCategory_t le_gnss_GetSbasConstellationCategory
 1617 (
 1618     uint16_t satId
 1619         ///< [IN] SBAS satellite number ID, referring to NMEA standard.
 1620 );
 1621 
 1622 //--------------------------------------------------------------------------------------------------
 1623 /**
 1624  * Get the Satellites Vehicle status.
 1625  *
 1626  * @return
 1627  *  - LE_FAULT         Function failed to find the positionSample.
 1628  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is invalid (set to UINT8_MAX).
 1629  *  - LE_OK            Function succeeded.
 1630  *
 1631  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1632  *       valid. Please compare them with UINT8_MAX.
 1633  *
 1634  * @note If the caller is passing an invalid Position sample reference into this function,
 1635  *       it is a fatal error, the function will not return.
 1636  */
 1637 //--------------------------------------------------------------------------------------------------
 1638 le_result_t le_gnss_GetSatellitesStatus
 1639 (
 1640     le_gnss_SampleRef_t positionSampleRef,
 1641         ///< [IN] Position sample's reference.
 1642     uint8_t* satsInViewCountPtr,
 1643         ///< [OUT] Number of satellites expected to be in view.
 1644     uint8_t* satsTrackingCountPtr,
 1645         ///< [OUT] Number of satellites in view, when tracking.
 1646     uint8_t* satsUsedCountPtr
 1647         ///< [OUT] Number of satellites in view used for Navigation.
 1648 );
 1649 
 1650 //--------------------------------------------------------------------------------------------------
 1651 /**
 1652  * Get the DOP parameters (Dilution Of Precision) for the fixed position
 1653  *
 1654  * @return
 1655  *  - LE_FAULT         Function failed to find the positionSample.
 1656  *  - LE_OUT_OF_RANGE  At least one of the retrieved parameters is invalid (set to UINT16_MAX).
 1657  *  - LE_OK            Function succeeded.
 1658  *
 1659  * @deprecated This function is deprecated, le_gnss_GetDilutionOfPrecision() should be used for
 1660  *             new code.
 1661  *
 1662  * @note The DOP values are given with 3 decimal places like: DOP value 2200 = 2.200
 1663  *
 1664  * @note In case the function returns LE_OUT_OF_RANGE, some of the retrieved parameters may be
 1665  *       valid. Please compare them with UINT16_MAX.
 1666  *
 1667  * @note If the caller is passing an invalid Position sample reference into this function,
 1668  *       it is a fatal error, the function will not return.
 1669  */
 1670 //--------------------------------------------------------------------------------------------------
 1671 le_result_t le_gnss_GetDop
 1672 (
 1673     le_gnss_SampleRef_t positionSampleRef,
 1674         ///< [IN] Position sample's reference.
 1675     uint16_t* hdopPtr,
 1676         ///< [OUT] Horizontal Dilution of Precision [resolution 1e-3].
 1677     uint16_t* vdopPtr,
 1678         ///< [OUT] Vertical Dilution of Precision [resolution 1e-3].
 1679     uint16_t* pdopPtr
 1680         ///< [OUT] Position Dilution of Precision [resolution 1e-3].
 1681 );
 1682 
 1683 //--------------------------------------------------------------------------------------------------
 1684 /**
 1685  * Get the DOP parameter (Dilution Of Precision) for the fixed position.
 1686  *
 1687  * @return
 1688  *  - LE_FAULT         Function failed to find the DOP value.
 1689  *  - LE_OUT_OF_RANGE  The retrieved parameter is invalid (set to UINT16_MAX).
 1690  *  - LE_OK            Function succeeded.
 1691  *
 1692  * @note This function replaces the deprecated function le_gnss_GetDop().
 1693  *
 1694  * @note The DOP value is given with 3 decimal places by default like: DOP value 2200 = 2.200
 1695  *       The resolution can be modified by calling the @c le_gnss_SetDopResolution() function.
 1696  *
 1697  * @note If the caller is passing an invalid Position sample reference into this function,
 1698  *       it is a fatal error, the function will not return.
 1699  */
 1700 //--------------------------------------------------------------------------------------------------
 1701 le_result_t le_gnss_GetDilutionOfPrecision
 1702 (
 1703     le_gnss_SampleRef_t positionSampleRef,
 1704         ///< [IN] Position sample's reference.
 1705     le_gnss_DopType_t dopType,
 1706         ///< [IN] Dilution of Precision type.
 1707     uint16_t* dopPtr
 1708         ///< [OUT] Dilution of Precision corresponding to the dopType
 1709 );
 1710 
 1711 //--------------------------------------------------------------------------------------------------
 1712 /**
 1713  * Get the position sample's altitude with respect to the WGS-84 ellipsoid
 1714  *
 1715  * @return
 1716  *  - LE_FAULT         Function failed to get the altitude.
 1717  *  - LE_OUT_OF_RANGE  The altitudeOnWgs84 is invalid (set to INT32_MAX).
 1718  *  - LE_OK            Function succeeded.
 1719  *
 1720  * @note altitudeOnWgs84 is in meters, with respect to the WGS-84 ellipsoid with 3 decimal
 1721  *       places (3047 = 3.047 meters).
 1722  *
 1723  * @note For a 2D position fix, the altitude with respect to the WGS-84 ellipsoid will be indicated
 1724  *       as invalid and set to INT32_MAX.
 1725  *
 1726  * @note If the caller is passing an invalid Position reference or a null pointer into this
 1727  *       function, it is a fatal error, the function will not return.
 1728  */
 1729 //--------------------------------------------------------------------------------------------------
 1730 le_result_t le_gnss_GetAltitudeOnWgs84
 1731 (
 1732     le_gnss_SampleRef_t positionSampleRef,
 1733         ///< [IN] Position sample's reference.
 1734     int32_t* altitudeOnWgs84Ptr
 1735         ///< [OUT] Altitude in meters, between WGS-84 earth ellipsoid
 1736         ///< and mean sea level [resolution 1e-3].
 1737 );
 1738 
 1739 //--------------------------------------------------------------------------------------------------
 1740 /**
 1741  * Get the position sample's magnetic deviation. It is the difference between the bearing to
 1742  * true north and the bearing shown on a magnetic compass. The deviation is positive when the
 1743  * magnetic north is east of true north.
 1744  *
 1745  * @return
 1746  *  - LE_FAULT         Function failed to find the positionSample.
 1747  *  - LE_OUT_OF_RANGE  The magneticDeviation is invalid (set to INT32_MAX).
 1748  *  - LE_OK            Function succeeded.
 1749  *
 1750  * @note magneticDeviation is in degrees, with 1 decimal places (47 = 4.7 degree).
 1751  *
 1752  * @note If the caller is passing an invalid Position sample reference into this function,
 1753  *       it is a fatal error, the function will not return.
 1754  */
 1755 //--------------------------------------------------------------------------------------------------
 1756 le_result_t le_gnss_GetMagneticDeviation
 1757 (
 1758     le_gnss_SampleRef_t positionSampleRef,
 1759         ///< [IN] Position sample's reference.
 1760     int32_t* magneticDeviationPtr
 1761         ///< [OUT] MagneticDeviation in degrees [resolution 1e-1].
 1762 );
 1763 
 1764 //--------------------------------------------------------------------------------------------------
 1765 /**
 1766  * This function gets the last updated position sample object reference.
 1767  *
 1768  * @return A reference to last Position's sample.
 1769  *
 1770  * @note
 1771  *      On failure, the process exits, so you don't have to worry about checking the returned
 1772  *      reference for validity.
 1773  */
 1774 //--------------------------------------------------------------------------------------------------
 1775 le_gnss_SampleRef_t le_gnss_GetLastSampleRef
 1776 (
 1777     void
 1778 );
 1779 
 1780 //--------------------------------------------------------------------------------------------------
 1781 /**
 1782  * This function must be called to release the position sample.
 1783  *
 1784  * @note If the caller is passing an invalid Position sample reference into this function,
 1785  *       it is a fatal error, the function will not return.
 1786  */
 1787 //--------------------------------------------------------------------------------------------------
 1788 void le_gnss_ReleaseSampleRef
 1789 (
 1790     le_gnss_SampleRef_t positionSampleRef
 1791         ///< [IN] Position sample's reference.
 1792 );
 1793 
 1794 //--------------------------------------------------------------------------------------------------
 1795 /**
 1796  * This function sets the SUPL Assisted-GNSS mode.
 1797  *
 1798  * @return
 1799  *  - LE_OK on success
 1800  *  - LE_FAULT on failure
 1801  *  - LE_UNSUPPORTED request not supported
 1802  *  - LE_TIMEOUT a time-out occurred
 1803  *
 1804  * @warning The settings are platform dependent. Please refer to
 1805  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
 1806  */
 1807 //--------------------------------------------------------------------------------------------------
 1808 le_result_t le_gnss_SetSuplAssistedMode
 1809 (
 1810     le_gnss_AssistedMode_t assistedMode
 1811         ///< [IN] Assisted-GNSS mode.
 1812 );
 1813 
 1814 //--------------------------------------------------------------------------------------------------
 1815 /**
 1816  * This function gets the SUPL Assisted-GNSS mode.
 1817  *
 1818  * @return
 1819  *  - LE_OK on success
 1820  *  - LE_FAULT on failure
 1821  *
 1822  * @note If the caller is passing a null pointer into this function, it is a fatal error, the
 1823  *       function will not return.
 1824  */
 1825 //--------------------------------------------------------------------------------------------------
 1826 le_result_t le_gnss_GetSuplAssistedMode
 1827 (
 1828     le_gnss_AssistedMode_t* assistedModePtr
 1829         ///< [OUT] Assisted-GNSS mode.
 1830 );
 1831 
 1832 //--------------------------------------------------------------------------------------------------
 1833 /**
 1834  * This function sets the SUPL server URL.
 1835  * That server URL is a NULL-terminated string with a maximum string length (including NULL
 1836  * terminator) equal to 256. Optionally the port number is specified after a colon.
 1837  *
 1838  * @return
 1839  *  - LE_OK on success
 1840  *  - LE_FAULT on failure
 1841  *  - LE_BUSY service is busy
 1842  *  - LE_TIMEOUT a time-out occurred
 1843  *
 1844  * @note If the SUPL server URL size is bigger than the maximum string length (including NULL
 1845  * terminator) size, it is a fatal error, the function will not return.
 1846  *
 1847  * @warning The settings are platform dependent. Please refer to
 1848  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
 1849  */
 1850 //--------------------------------------------------------------------------------------------------
 1851 le_result_t le_gnss_SetSuplServerUrl
 1852 (
 1853     const char* LE_NONNULL suplServerUrl
 1854         ///< [IN] SUPL server URL.
 1855 );
 1856 
 1857 //--------------------------------------------------------------------------------------------------
 1858 /**
 1859  * This function injects the SUPL certificate to be used in A-GNSS sessions. Certificates must
 1860  * be encoded in DER. Other certificate encryptions (e.g., PEM, CER and CRT)
 1861  * aren't supported.
 1862  *
 1863  * @return
 1864  *  - LE_OK on success
 1865  *  - LE_BAD_PARAMETER on invalid parameter
 1866  *  - LE_FAULT on failure
 1867  *  - LE_BUSY service is busy
 1868  *  - LE_TIMEOUT a time-out occurred
 1869  *
 1870  * @note If the SUPL certificate size is bigger than the Maximum SUPL certificate size,
 1871  * it is a fatal error, the function will not return.
 1872  */
 1873 //--------------------------------------------------------------------------------------------------
 1874 le_result_t le_gnss_InjectSuplCertificate
 1875 (
 1876     uint8_t suplCertificateId,
 1877         ///< [IN] ID of the SUPL certificate.
 1878         ///< Certificate ID range is 0 to 9
 1879     uint16_t suplCertificateLen,
 1880         ///< [IN] SUPL certificate size in Bytes.
 1881     const char* LE_NONNULL suplCertificate
 1882         ///< [IN] SUPL certificate contents.
 1883 );
 1884 
 1885 //--------------------------------------------------------------------------------------------------
 1886 /**
 1887  * This function deletes the SUPL certificate.
 1888  *
 1889  * @return
 1890  *  - LE_OK on success
 1891  *  - LE_BAD_PARAMETER on invalid parameter
 1892  *  - LE_FAULT on failure
 1893  *  - LE_BUSY service is busy
 1894  *  - LE_TIMEOUT a time-out occurred
 1895  */
 1896 //--------------------------------------------------------------------------------------------------
 1897 le_result_t le_gnss_DeleteSuplCertificate
 1898 (
 1899     uint8_t suplCertificateId
 1900         ///< [IN] ID of the SUPL certificate.
 1901         ///< Certificate ID range is 0 to 9
 1902 );
 1903 
 1904 //--------------------------------------------------------------------------------------------------
 1905 /**
 1906  * This function sets the enabled NMEA sentences using a bit mask.
 1907  *
 1908  * @return
 1909  *  - LE_OK             Success
 1910  *  - LE_BAD_PARAMETER  Bit mask exceeds the maximal value
 1911  *  - LE_FAULT          Failure
 1912  *  - LE_BUSY           Service is busy
 1913  *  - LE_TIMEOUT        Timeout occurred
 1914  *  - LE_NOT_PERMITTED  GNSS device is not in "ready" state
 1915  *
 1916  * @warning This function may be subject to limitations depending on the platform. Please refer to
 1917  *          the @ref platformConstraintsGnss page.
 1918  *
 1919  * @note Some NMEA sentences are unsupported depending on the platform. Please refer to
 1920  *       @ref platformConstraintsGnss_nmeaMask section for full details. Setting an unsuported NMEA
 1921  *       sentence won't report an error.
 1922  *
 1923  * @warning The settings are platform dependent. Please refer to
 1924  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
 1925  *
 1926  * @deprecated LE_GNSS_NMEA_MASK_PQXFI is deprecated. LE_GNSS_NMEA_MASK_PTYPE should be used
 1927  *             instead. Setting LE_GNSS_NMEA_MASK_PTYPE will also set LE_GNSS_NMEA_MASK_PQXFI.
 1928  */
 1929 //--------------------------------------------------------------------------------------------------
 1930 le_result_t le_gnss_SetNmeaSentences
 1931 (
 1932     le_gnss_NmeaBitMask_t nmeaMask
 1933         ///< [IN] Bit mask for enabled NMEA sentences.
 1934 );
 1935 
 1936 //--------------------------------------------------------------------------------------------------
 1937 /**
 1938  * This function gets the bit mask for the enabled NMEA sentences.
 1939  *
 1940  * @return
 1941  *  - LE_OK             Success
 1942  *  - LE_FAULT          Failure
 1943  *  - LE_BUSY           Service is busy
 1944  *  - LE_TIMEOUT        Timeout occurred
 1945  *  - LE_NOT_PERMITTED  GNSS device is not in "ready" state
 1946  *
 1947  * @note If the caller is passing a null pointer to this function, it is a fatal error, the
 1948  *       function will not return.
 1949  *
 1950  * @note Some NMEA sentences are unsupported depending on the platform. Please refer to
 1951  *       @ref platformConstraintsGnss_nmeaMask section for full details. The bit mask for an unset
 1952  *       or unsupported NMEA sentence is zero.
 1953  */
 1954 //--------------------------------------------------------------------------------------------------
 1955 le_result_t le_gnss_GetNmeaSentences
 1956 (
 1957     le_gnss_NmeaBitMask_t* nmeaMaskPtrPtr
 1958         ///< [OUT] Bit mask for enabled NMEA sentences.
 1959 );
 1960 
 1961 //--------------------------------------------------------------------------------------------------
 1962 /**
 1963  * This function returns the status of the GNSS device.
 1964  *
 1965  */
 1966 //--------------------------------------------------------------------------------------------------
 1967 le_gnss_State_t le_gnss_GetState
 1968 (
 1969     void
 1970 );
 1971 
 1972 //--------------------------------------------------------------------------------------------------
 1973 /**
 1974  * This function sets the GNSS minimum elevation.
 1975  *
 1976  * @return
 1977  *  - LE_OK on success
 1978  *  - LE_FAULT on failure
 1979  *  - LE_OUT_OF_RANGE if the minimum elevation is above range
 1980  *  - LE_UNSUPPORTED request not supported
 1981  *
 1982  * @warning The settings are platform dependent. Please refer to
 1983  *          @ref platformConstraintsGnss_SettingConfiguration section for full details.
 1984  */
 1985 //--------------------------------------------------------------------------------------------------
 1986 le_result_t le_gnss_SetMinElevation
 1987 (
 1988     uint8_t minElevation
 1989         ///< [IN] Minimum elevation in degrees [range 0..90].
 1990 );
 1991 
 1992 //--------------------------------------------------------------------------------------------------
 1993 /**
 1994  * This function gets the GNSS minimum elevation.
 1995  *
 1996  * @return
 1997  *  - LE_OK on success
 1998  *  - LE_FAULT on failure
 1999  *  - LE_UNSUPPORTED request not supported
 2000  *
 2001  * @note If the caller is passing n null pointer to this function, it is a fatal error, the
 2002  *       function will not return.
 2003  */
 2004 //--------------------------------------------------------------------------------------------------
 2005 le_result_t le_gnss_GetMinElevation
 2006 (
 2007     uint8_t* minElevationPtrPtr
 2008         ///< [OUT] Minimum elevation in degrees [range 0..90].
 2009 );
 2010 
 2011 //--------------------------------------------------------------------------------------------------
 2012 /**
 2013  * Set the resolution for the DOP parameters
 2014  *
 2015  * @return LE_OK               Function succeeded.
 2016  * @return LE_BAD_PARAMETER    Invalid parameter provided.
 2017  * @return LE_FAULT            Function failed.
 2018  *
 2019  * @note The function sets the same resolution to all DOP values returned by
 2020  *       le_gnss_GetDilutionOfPrecision() API. The resolution setting takes effect immediately.
 2021  *
 2022  * @note The resolution setting is done per client session.
 2023  */
 2024 //--------------------------------------------------------------------------------------------------
 2025 le_result_t le_gnss_SetDopResolution
 2026 (
 2027     le_gnss_Resolution_t resolution
 2028         ///< [IN] Resolution.
 2029 );
 2030 
 2031 //--------------------------------------------------------------------------------------------------
 2032 /**
 2033  * Set the resolution for the specific type of data
 2034  *
 2035  * @return LE_OK               Function succeeded.
 2036  * @return LE_BAD_PARAMETER    Invalid parameter provided.
 2037  * @return LE_FAULT            Function failed.
 2038  *
 2039  * @note The resolution setting takes effect immediately and is not persistent to reset.
 2040  *
 2041  * @note The resolution setting is done per client session.
 2042  */
 2043 //--------------------------------------------------------------------------------------------------
 2044 le_result_t le_gnss_SetDataResolution
 2045 (
 2046     le_gnss_DataType_t dataType,
 2047         ///< [IN] Data type.
 2048     le_gnss_Resolution_t resolution
 2049         ///< [IN] Resolution.
 2050 );
 2051 
 2052 //--------------------------------------------------------------------------------------------------
 2053 /**
 2054  * This function converts a location data parameter from/to multi-coordinate system
 2055  *
 2056  * @return
 2057  *  - LE_OK on success
 2058  *  - LE_FAULT on failure
 2059  *  - LE_BAD_PARAMETER Invalid parameter provided.
 2060  *  - LE_UNSUPPORTED request not supported
 2061  *
 2062  * @note The resolution of location data parameter remains unchanged after the conversion.
 2063  */
 2064 //--------------------------------------------------------------------------------------------------
 2065 le_result_t le_gnss_ConvertDataCoordinateSystem
 2066 (
 2067     le_gnss_CoordinateSystem_t coordinateSrc,
 2068         ///< [IN] Coordinate system to convert from.
 2069     le_gnss_CoordinateSystem_t coordinateDst,
 2070         ///< [IN] Coordinate system to convert to.
 2071     le_gnss_LocationDataType_t locationDataType,
 2072         ///< [IN] Type of location data to convert.
 2073     int64_t locationDataSrc,
 2074         ///< [IN] Data to convert.
 2075     int64_t* locationDataDstPtr
 2076         ///< [OUT] Converted Data.
 2077 );
 2078 
 2079 //--------------------------------------------------------------------------------------------------
 2080 /**
 2081  * Enables the EXT_GPS_LNA_EN signal
 2082  *
 2083  * @return LE_OK               Function succeeded.
 2084  * @return LE_NOT_PERMITTED    GNSS is not in the ready state
 2085  * @return LE_UNSUPPORTED      Function not supported on this platform
 2086  *
 2087  * @note The EXT_GPS_LNA_EN signal will be set high when the GNSS state is active
 2088  */
 2089 //--------------------------------------------------------------------------------------------------
 2090 le_result_t le_gnss_EnableExternalLna
 2091 (
 2092     void
 2093 );
 2094 
 2095 //--------------------------------------------------------------------------------------------------
 2096 /**
 2097  * Disables the EXT_GPS_LNA_EN signal
 2098  *
 2099  * @return LE_OK               Function succeeded.
 2100  * @return LE_NOT_PERMITTED    GNSS is not in the ready state
 2101  * @return LE_UNSUPPORTED      Function not supported on this platform
 2102  *
 2103  */
 2104 //--------------------------------------------------------------------------------------------------
 2105 le_result_t le_gnss_DisableExternalLna
 2106 (
 2107     void
 2108 );
 2109 
 2110 //--------------------------------------------------------------------------------------------------
 2111 /**
 2112  * Returns a bitmask containing all NMEA sentences supported on this platform
 2113  *
 2114  * @return LE_OK               Function succeeded.
 2115  * @return LE_UNSUPPORTED      Function not supported on this platform.
 2116  */
 2117 //--------------------------------------------------------------------------------------------------
 2118 le_result_t le_gnss_GetSupportedNmeaSentences
 2119 (
 2120     le_gnss_NmeaBitMask_t* NmeaMaskPtr
 2121         ///< [OUT] Supported NMEA sentences
 2122 );
 2123 
 2124 //--------------------------------------------------------------------------------------------------
 2125 /**
 2126  * Returns a bitmask containing all satellite constellations supported on this platform
 2127  *
 2128  * @return LE_OK               Function succeeded.
 2129  * @return LE_UNSUPPORTED      Function not supported on this platform.
 2130  */
 2131 //--------------------------------------------------------------------------------------------------
 2132 le_result_t le_gnss_GetSupportedConstellations
 2133 (
 2134     le_gnss_ConstellationBitMask_t* constellationMaskPtr
 2135         ///< [OUT] Supported GNSS constellations
 2136 );
 2137 
 2138 //--------------------------------------------------------------------------------------------------
 2139 /**
 2140  * Get the minimum NMEA rate supported on this platform
 2141  *
 2142  * @return LE_OK               Function succeeded.
 2143  * @return LE_UNSUPPORTED      Function not supported on this platform
 2144  */
 2145 //--------------------------------------------------------------------------------------------------
 2146 le_result_t le_gnss_GetMinNmeaRate
 2147 (
 2148     uint32_t* minNmeaRatePtr
 2149         ///< [OUT] Minimum NMEA rate in milliseconds.
 2150 );
 2151 
 2152 //--------------------------------------------------------------------------------------------------
 2153 /**
 2154  * Get the maximum NMEA rate supported on this platform
 2155  *
 2156  * @return LE_OK               Function succeeded.
 2157  * @return LE_UNSUPPORTED      Function not supported on this platform
 2158  */
 2159 //--------------------------------------------------------------------------------------------------
 2160 le_result_t le_gnss_GetMaxNmeaRate
 2161 (
 2162     uint32_t* maxNmeaRatePtr
 2163         ///< [OUT] Maximum NMEA rate in milliseconds.
 2164 );
 2165 
 2166 #endif // LE_GNSS_INTERFACE_H_INCLUDE_GUARD
le_gnss_GetDirection
le_result_t le_gnss_GetDirection(le_gnss_SampleRef_t positionSampleRef, uint32_t *directionPtr, uint32_t *directionAccuracyPtr)
le_gnss_GetAltitude
le_result_t le_gnss_GetAltitude(le_gnss_SampleRef_t positionSampleRef, int32_t *altitudePtr, int32_t *vAccuracyPtr)
le_gnss_GetSbasConstellationCategory
le_gnss_SbasConstellationCategory_t le_gnss_GetSbasConstellationCategory(uint16_t satId)
le_gnss_InjectSuplCertificate
le_result_t le_gnss_InjectSuplCertificate(uint8_t suplCertificateId, uint16_t suplCertificateLen, const char *LE_NONNULL suplCertificate)
le_gnss_GetSatellitesInfo
le_result_t le_gnss_GetSatellitesInfo(le_gnss_SampleRef_t positionSampleRef, uint16_t *satIdPtr, size_t *satIdSizePtr, le_gnss_Constellation_t *satConstPtr, size_t *satConstSizePtr, bool *satUsedPtr, size_t *satUsedSizePtr, uint8_t *satSnrPtr, size_t *satSnrSizePtr, uint16_t *satAzimPtr, size_t *satAzimSizePtr, uint8_t *satElevPtr, size_t *satElevSizePtr)
le_gnss_StartMode
le_result_t le_gnss_StartMode(le_gnss_StartMode_t mode)
le_gnss_GetExtendedEphemerisValidity
le_result_t le_gnss_GetExtendedEphemerisValidity(uint64_t *startTimePtr, uint64_t *stopTimePtr)
le_result_t
le_result_t
Definition: le_basics.h:45
le_gnss_Start
le_result_t le_gnss_Start(void)
le_gnss_AddPositionHandler
le_gnss_PositionHandlerRef_t le_gnss_AddPositionHandler(le_gnss_PositionHandlerFunc_t handlerPtr, void *contextPtr)
le_gnss_GetEpochTime
le_result_t le_gnss_GetEpochTime(le_gnss_SampleRef_t positionSampleRef, uint64_t *millisecondsPtr)
le_gnss_ForceFactoryRestart
le_result_t le_gnss_ForceFactoryRestart(void)
le_gnss_GetLeapSeconds
le_result_t le_gnss_GetLeapSeconds(uint64_t *gpsTimePtr, int32_t *currentLeapSecondsPtr, uint64_t *changeEventTimePtr, int32_t *nextLeapSecondsPtr)
le_gnss_LoadExtendedEphemerisFile
le_result_t le_gnss_LoadExtendedEphemerisFile(int fd)
le_gnss_GetAcquisitionRate
le_result_t le_gnss_GetAcquisitionRate(uint32_t *ratePtr)
le_gnss_DisconnectService
void le_gnss_DisconnectService(void)
le_gnss_ForceColdRestart
le_result_t le_gnss_ForceColdRestart(void)
le_gnss_ForceWarmRestart
le_result_t le_gnss_ForceWarmRestart(void)
le_gnss_InjectUtcTime
le_result_t le_gnss_InjectUtcTime(uint64_t timeUtc, uint32_t timeUnc)
le_gnss_SetDataResolution
le_result_t le_gnss_SetDataResolution(le_gnss_DataType_t dataType, le_gnss_Resolution_t resolution)
le_gnss_SetConstellationArea
le_result_t le_gnss_SetConstellationArea(le_gnss_Constellation_t satConstellation, le_gnss_ConstellationArea_t constellationArea)
le_gnss_GetTtff
le_result_t le_gnss_GetTtff(uint32_t *ttffPtr)
le_gnss_GetConstellation
le_result_t le_gnss_GetConstellation(le_gnss_ConstellationBitMask_t *constellationMaskPtr)
le_gnss_RemovePositionHandler
void le_gnss_RemovePositionHandler(le_gnss_PositionHandlerRef_t handlerRef)
le_gnss_SetSuplServerUrl
le_result_t le_gnss_SetSuplServerUrl(const char *LE_NONNULL suplServerUrl)
le_gnss_EnableExtendedEphemerisFile
le_result_t le_gnss_EnableExtendedEphemerisFile(void)
le_gnss_GetAltitudeOnWgs84
le_result_t le_gnss_GetAltitudeOnWgs84(le_gnss_SampleRef_t positionSampleRef, int32_t *altitudeOnWgs84Ptr)
le_gnss_GetTime
le_result_t le_gnss_GetTime(le_gnss_SampleRef_t positionSampleRef, uint16_t *hoursPtr, uint16_t *minutesPtr, uint16_t *secondsPtr, uint16_t *millisecondsPtr)
le_gnss_GetSuplAssistedMode
le_result_t le_gnss_GetSuplAssistedMode(le_gnss_AssistedMode_t *assistedModePtr)
le_gnss_GetLocation
le_result_t le_gnss_GetLocation(le_gnss_SampleRef_t positionSampleRef, int32_t *latitudePtr, int32_t *longitudePtr, int32_t *hAccuracyPtr)
le_gnss_DisableExtendedEphemerisFile
le_result_t le_gnss_DisableExtendedEphemerisFile(void)
le_gnss_TryConnectService
le_result_t le_gnss_TryConnectService(void)
le_gnss_SetAcquisitionRate
le_result_t le_gnss_SetAcquisitionRate(uint32_t rate)
le_gnss_SetMinElevation
le_result_t le_gnss_SetMinElevation(uint8_t minElevation)
le_gnss_GetDilutionOfPrecision
le_result_t le_gnss_GetDilutionOfPrecision(le_gnss_SampleRef_t positionSampleRef, le_gnss_DopType_t dopType, uint16_t *dopPtr)
le_gnss_DeleteSuplCertificate
le_result_t le_gnss_DeleteSuplCertificate(uint8_t suplCertificateId)
le_gnss_ConvertDataCoordinateSystem
le_result_t le_gnss_ConvertDataCoordinateSystem(le_gnss_CoordinateSystem_t coordinateSrc, le_gnss_CoordinateSystem_t coordinateDst, le_gnss_LocationDataType_t locationDataType, int64_t locationDataSrc, int64_t *locationDataDstPtr)
le_gnss_GetMagneticDeviation
le_result_t le_gnss_GetMagneticDeviation(le_gnss_SampleRef_t positionSampleRef, int32_t *magneticDeviationPtr)
le_gnss_ReleaseSampleRef
void le_gnss_ReleaseSampleRef(le_gnss_SampleRef_t positionSampleRef)
le_gnss_GetMaxNmeaRate
le_result_t le_gnss_GetMaxNmeaRate(uint32_t *maxNmeaRatePtr)
le_gnss_GetNmeaSentences
le_result_t le_gnss_GetNmeaSentences(le_gnss_NmeaBitMask_t *nmeaMaskPtrPtr)
le_gnss_GetVerticalSpeed
le_result_t le_gnss_GetVerticalSpeed(le_gnss_SampleRef_t positionSampleRef, int32_t *vspeedPtr, int32_t *vspeedAccuracyPtr)
le_gnss_DisableExternalLna
le_result_t le_gnss_DisableExternalLna(void)
le_gnss_SetSuplAssistedMode
le_result_t le_gnss_SetSuplAssistedMode(le_gnss_AssistedMode_t assistedMode)
le_gnss_GetDate
le_result_t le_gnss_GetDate(le_gnss_SampleRef_t positionSampleRef, uint16_t *yearPtr, uint16_t *monthPtr, uint16_t *dayPtr)
le_gnss_SetDopResolution
le_result_t le_gnss_SetDopResolution(le_gnss_Resolution_t resolution)
LE_FULL_API
#define LE_FULL_API
Definition: le_apiFeatures.h:40
le_gnss_ConnectService
void le_gnss_ConnectService(void)
le_gnss_GetSatellitesStatus
le_result_t le_gnss_GetSatellitesStatus(le_gnss_SampleRef_t positionSampleRef, uint8_t *satsInViewCountPtr, uint8_t *satsTrackingCountPtr, uint8_t *satsUsedCountPtr)
le_gnss_Stop
le_result_t le_gnss_Stop(void)
le_gnss_GetSupportedConstellations
le_result_t le_gnss_GetSupportedConstellations(le_gnss_ConstellationBitMask_t *constellationMaskPtr)
le_gnss_GetState
le_gnss_State_t le_gnss_GetState(void)
le_gnss_SetNmeaSentences
le_result_t le_gnss_SetNmeaSentences(le_gnss_NmeaBitMask_t nmeaMask)
le_gnss_GetPositionState
le_result_t le_gnss_GetPositionState(le_gnss_SampleRef_t positionSampleRef, le_gnss_FixState_t *statePtr)
le_gnss_GetMinElevation
le_result_t le_gnss_GetMinElevation(uint8_t *minElevationPtrPtr)
le_gnss_Disable
le_result_t le_gnss_Disable(void)
le_gnss_GetHorizontalSpeed
le_result_t le_gnss_GetHorizontalSpeed(le_gnss_SampleRef_t positionSampleRef, uint32_t *hspeedPtr, uint32_t *hspeedAccuracyPtr)
le_gnss_GetLastSampleRef
le_gnss_SampleRef_t le_gnss_GetLastSampleRef(void)
le_gnss_SetConstellation
le_result_t le_gnss_SetConstellation(le_gnss_ConstellationBitMask_t constellationMask)
le_gnss_EnableExternalLna
le_result_t le_gnss_EnableExternalLna(void)
le_gnss_ForceHotRestart
le_result_t le_gnss_ForceHotRestart(void)
le_gnss_GetMinNmeaRate
le_result_t le_gnss_GetMinNmeaRate(uint32_t *minNmeaRatePtr)
le_gnss_SetServerDisconnectHandler
LE_FULL_API void le_gnss_SetServerDisconnectHandler(le_gnss_DisconnectHandler_t disconnectHandler, void *contextPtr)
le_gnss_Enable
le_result_t le_gnss_Enable(void)
le_gnss_DisconnectHandler_t
void(* le_gnss_DisconnectHandler_t)(void *)
Definition: le_gnss_interface.h:521
le_gnss_GetGpsTime
le_result_t le_gnss_GetGpsTime(le_gnss_SampleRef_t positionSampleRef, uint32_t *gpsWeekPtr, uint32_t *gpsTimeOfWeekPtr)
le_gnss_GetConstellationArea
le_result_t le_gnss_GetConstellationArea(le_gnss_Constellation_t satConstellation, le_gnss_ConstellationArea_t *constellationAreaPtr)
le_gnss_GetGpsLeapSeconds
le_result_t le_gnss_GetGpsLeapSeconds(le_gnss_SampleRef_t positionSampleRef, uint8_t *leapSecondsPtr)
le_gnss_GetSupportedNmeaSentences
le_result_t le_gnss_GetSupportedNmeaSentences(le_gnss_NmeaBitMask_t *NmeaMaskPtr)
le_gnss_GetTimeAccuracy
le_result_t le_gnss_GetTimeAccuracy(le_gnss_SampleRef_t positionSampleRef, uint32_t *timeAccuracyPtr)
le_gnss_GetDop
le_result_t le_gnss_GetDop(le_gnss_SampleRef_t positionSampleRef, uint16_t *hdopPtr, uint16_t *vdopPtr, uint16_t *pdopPtr)