le_atServer_interface.h

    1 
    2 
    3 /*
    4  * ====================== WARNING ======================
    5  *
    6  * THE CONTENTS OF THIS FILE HAVE BEEN AUTO-GENERATED.
    7  * DO NOT MODIFY IN ANY WAY.
    8  *
    9  * ====================== WARNING ======================
   10  */
   11 
   12 /**
   13  * @page c_atServer AT Commands Server
   14  *
   15  * @ref le_atServer_interface.h "API Reference"
   16  *
   17  * The AT commands Server handles AT commands' subscriptions on a requested serial device. The
   18  * server is compliant with 3GPP 27.007, paragraphs 4.0, 4.1 and 4.2, and V25 ter, paragraphs 5.3,
   19  * 5.4.
   20  *
   21  * @section le_atServer_binding IPC interfaces binding
   22  *
   23  * All the functions of this API are provided by the @b atService.
   24  *
   25  * Here's a code sample binding to the AT commands server:
   26  * @verbatim
   27    bindings:
   28    {
   29      atServerTest.atServerTestComp.le_atServer -> atService.le_atServer
   30    }
   31    @endverbatim
   32  *
   33  * @section atServer_syntax AT command syntax
   34  *
   35  * @subsection atServer_Syntax Syntax rules
   36  *
   37  * To be interpreted, the command line sent to the AT commands server must start by the pattern
   38  * "AT" (mean ATtention command).<br>
   39  * Lowercase characters are changed to their uppercase equivalents. Only characters between quotes
   40  * are not replaced.
   41  *
   42  * The supported command formats are:
   43  * - Basic syntax command:
   44  *      - using the format AT<command>[<number>]<br>
   45  * The command name is composed of one or several of those characters: A to Z, & and \\.
   46  *      - the syntax of S command is also supported, like:
   47  *          - ATS<parameter_number>?
   48  *          - ATS<parameter_number>=<value>
   49  *      - D command is supported. The characters which don't belong to the following list are
   50  * ignore:
   51  *              - V.250 dialing digits: 0 1 2 3 4 5 6 7 8 9 * # + A B C D
   52  *              - V.250 modifier characters: , T P ! W @
   53  *              - V.250 semicolon character: ;
   54  *              - GSM/UMTS modifier characters:
   55  *                  - I or i for CLIR supplementary service subscription
   56  * (I=invocation, i=suppression)
   57  *                  - G or g for CUG supplementary service subscription (G=invocation,
   58  * g=suppression)
   59  *                  - Direct dialing from phonebook: > (if follow by a string, it has to be put
   60  * between quote)
   61  *              .
   62  * @if 0 doxygen comment: The dot above ends the sub item, and must be kept @endif
   63  * All characters after the "D" are considered part of The D command parameter up to a semicolon or
   64  * the end of command line.
   65  * <br>
   66  * - Extended command format, with the following format:
   67  *      - action command with no parameters: AT+<name>
   68  *      - parameter command: AT+<name>=<value1>[,<value2>[,<value3>[...]]]<br>
   69  *        Values must be separated by a coma. Some values may be optional: in that case, optional
   70  *        value can be omitted in the AT command (e.g. AT+ABCD=,1).<br>
   71  *        A value is a string composed of one or several of the following characters: 0 to 9,
   72  *        A to F, H, h, *, #, +, -. To set a value with other characters, the value has to be set
   73  * between quote.
   74  *      - test command (determine the supported values): AT+<name>=?
   75  *      - read command (determine the current values, or stored values): AT+<name>?[<value>]<br>
   76  * An optional parameter is supported.
   77  *
   78  * @note '+' AT command starting character shall be replaced by other symbol, not included into
   79  * a to z, A to Z, & and \\.
   80  *
   81  * @subsection atServer_concate Concatenating commands
   82  *
   83  * Basic syntax command can be concatenated without a separator:<br>
   84  * ATE1V1S95=47S0=0
   85  *
   86  * Additional commands (extended syntax command or basic syntax command) can be added after an
   87  * extended syntax command with the insertion of a semicolon at the end of the command:<br>
   88  * AT+CMDA=<param1>,<param2>;+CMDB?;+CMDC=?<br>
   89  * AT+CMDA=<param1>,<param2>;E1V1
   90  *
   91  * Extended syntax command can be concatenated after basic syntax commands without a separator:<br>
   92  * ATE1V1+CMD=<param1>
   93  *
   94  * @section atServer_binding Device Binding
   95  *
   96  * le_atServer_Open() must be called to bind the file descriptor of the device with the AT commands
   97  * server. Note that a socket can also be bound.
   98  * Multiple devices can be bound.
   99  * A file descriptor can be unbound using le_atServer_Close().
  100  *
  101  * The server can be suspended using le_atServer_Suspend() in order to use the
  102  * opened fd for other purposes like starting a PPP service on the opened fd.
  103  * For that a fd dup needs to be done before opening a server session.
  104  * When needed, the server can be resumed using le_atServer_Resume(). Make sure
  105  * to close the fd when the application exists or you may get too many open files error.
  106  *
  107  * used before opening a server session
  108  * @section atServer_subscription Subscription
  109  *
  110  * A new AT command can be added into the parser using le_atServer_Create(), and it can be deleted
  111  * using le_atServer_Delete().
  112  * le_atServer_EnableEcho() allows the user to enable echo on a selected device.
  113  * le_atServer_DisableEcho() allows the user to disable echo on a selected device.
  114  *
  115  * @section atServer_handler Handler
  116  *
  117  * To handle the AT command, the application has to subscribe a handler using
  118  * le_atServer_AddCommandHandler(). It can be removed with le_atServer_RemoveCommandHandler().
  119  *
  120  * The called handler (le_atServer_CommandHandlerRef_t prototype) can use
  121  * le_atServer_GetCommandName() to retrieve the received AT command string.
  122  *
  123  * The device used to execute the AT command can be retrieve thanks to le_atServer_GetDevice().
  124  *
  125  * It can also call le_atServer_GetParameter() to retrieve parameters of the AT command. This
  126  * function gets the string sending through the AT command. If the parameter was sent between
  127  * quotes, the quotes are removed. This API can be used for both formats:
  128  * - In case of a basic format command (AT<command>[<number>]), if exists, the <number> can be
  129  * retrieved at the index 0. For S command specific format (ATS<parameter_number>=<value>),
  130  * the <parameter_number> is retrieved at the index 0, the <value> parameter at the index 1.
  131  *
  132  * - In case of an extended format command, parameters are retrieved thanks to their indexes,
  133  * starting from 0. If the parameter is missed (e.g. "AT+CMD=,1"), the getting value is an empty
  134  * string (i.e. '\0' with null length).
  135  *
  136  * The handler receives in argument the type of the AT command (of le_atServer_Type_t type).
  137  * Even if these types are specific to the extended format commands according to the standards, they
  138  * are also applicable here to basic format commands to detect commands with parameters, or read
  139  * values (e.g. ATS<parameter_number>?).
  140  *
  141  * @note If the parameter is parsed with quotes, the quotes are removed when retrieving the
  142  * parameter value using le_atServer_GetParameter() API. If a parmeter is not parsed with quotes,
  143  * that parameter is converted to uppercase equivalent.
  144  *
  145  * @subsection atServer_RegistrationHandler Registration Handler
  146  *
  147  * The AT command handling mechanism may rely on an intermediate handler to reroute the AT commands
  148  * to the atServer.
  149  * le_atServer_AddCmdRegistrationHandler() installs such a registration handler that will be called
  150  * each time a new command is subscribed by an application with le_atServer_AddCommandHandler().
  151  *
  152  * @section atServer_responses Responses
  153  *
  154  * @subsection intermediateRsp Intermediate response
  155  *
  156  * The application has can send intermediate responses through
  157  * le_atServer_SendIntermediateResponse().
  158  *
  159  * @note If le_atServer_SendIntermediateResponse() return LE_FAULT, the final response have to be
  160  * sent.
  161  *
  162  * @subsection finalResultCode Final result code
  163  *
  164  * The application must return a final result code using le_atServer_SendFinalResultCode().
  165  * The corresponding device will be locked until the final response is sent.
  166  *
  167  * If no answer is sent, the device will not accept any new AT commands (an error will be
  168  * returned).
  169  *
  170  * le_atServer_SendFinalResultCode() takes as arguments the AT command reference, a pattern (which
  171  * is the prefix of the final response), a final response type as defined in
  172  * @ref le_atServer_FinalRsp_t and an error code identifier.
  173  *
  174  * The final response type permits to the AT command Server to continue or stop the parsing of
  175  * concatenated commands: if one command is failed, next commands are not executed, the final result
  176  * of the concatenated AT command is the last error.
  177  *
  178  * @subsection finalRsp Final response
  179  *
  180  * @deprecated le_atServer_SendFinalResponse() should not be used anymore and will be removed soon.
  181  * It has been replaced by le_atServer_SendFinalResultCode().
  182  *
  183  * In all cases, the application must send a final response using
  184  * le_atServer_SendFinalResponse(). The corresponding device will be locked until the final response
  185  * is sent.
  186  *
  187  * If no answer is sent, the device will not accept any new AT commands (an error will be
  188  * returned).
  189  *
  190  * le_atServer_SendFinalResponse() has to inform of the result thanks to the argument of
  191  * le_atServer_FinalRsp_t type. This argument permits to the AT command Server to:
  192  * - create the result string if no custom string is provided
  193  * - continue or stop the parsing of concatenated commands: if one command is failed, next commands
  194  * are not executed, the final result of the concatenated AT command is the last error.
  195  *
  196  * @subsection unsolicitedRsp Unsolicited response
  197  *
  198  * The application can also send unsolicited responses to warn a host
  199  * application using le_atServer_SendUnsolicitedResponse().
  200  *
  201  * This response is sent when no AT command is being processing on the device (i.e. unsolicited
  202  * response is sent between the latest final response and the next reception of an AT command).
  203  *
  204  * If an unsolicited response is sent when an AT command is in progress, the unsolicited response
  205  * is buffered and sent as soon as the device becomes available (i.e., the processing AT command
  206  * sends its final response).
  207  *
  208  * @section atServer_errors Error codes
  209  *
  210  * le_atServer_EnableExtendedErrorCodes() allows the user to use extended error codes on a selected
  211  * device. When this mode is enabled, numerical codes are displayed when an error occurs.
  212  * le_atServer_EnableVerboseErrorCodes() allows the user to enable verbose error codes on a selected
  213  * device. Thus, instead of numerical codes, error are actually displayed as verbose messages.
  214  * le_atServer_DisableExtendedErrorCodes() allows the user to disable the current error mode namely
  215  * extended error codes or verbose error codes on a selected device.
  216  *
  217  * User can create custom error codes using le_atServer_CreateErrorCode() by providing an error
  218  * code identifier and a specific pattern. The pattern is a prefix of the final response string.
  219  * Standard error codes use the patterns "+CME ERROR: " and "+CMS ERROR: " for instance. These
  220  * standard patterns are defined in the following macros: CME_ERROR and CMS_ERROR.
  221  * The code identifier should be equal or higher than 512 as the range [0, 511] is reserved for
  222  * standard error codes defined in 3GPP 27.007 9.2 and TS 127.005 3.2.5.
  223  *
  224  * le_atServer_CreateErrorCode() returns a reference which can be used to attach a custom verbose
  225  * message to the error codes by calling le_atServer_SetVerboseErrorCode().
  226  * le_atServer_DeleteErrorCode() allows the user to drop an already registered error code.
  227  *
  228  * @section Text
  229  *
  230  * le_atServer_GetTextAsync() allows the user to register a le_atServer_GetTextCallback_t callback
  231  * to retrieve text and sends a prompt <CR><LF><greater_than><SPACE> on the current command's
  232  * device.
  233  *
  234  * It will receive at max LE_ATDEFS_TEXT_MAX_LEN bytes.
  235  * If Esc Key is hit then the command is canceled and an empty buffer is returned with result
  236  * set to LE_OK.
  237  * If Ctrl+z is hit then the received buffer is returned and the result is set to LE_OK.
  238  * In case of a read error, an empty buffer is returned with result set to LE_IO_ERROR;
  239  *
  240  * Example:
  241  *
  242  * AT+CMGS="+85291234567"
  243  * > <ESC>
  244  *
  245  * OK
  246  *
  247  * AT+CMGS="+85291234567"
  248  * > It is easy to send text messages. <CTRL-Z>
  249  * +CMGS: 5
  250  *
  251  * OK
  252  *
  253  * @section atServer_bridge Bridge
  254  *
  255  * A second file descriptor can be used thanks to le_atServer_OpenBridge() to send
  256  * all unknown AT commands to an alternative device (such as the modem). For all devices linked to
  257  * that bridge using le_atServer_AddDeviceToBridge(), unknown commands will be sent through that
  258  * file descriptor.
  259  *
  260  * The bridge only works with AT commands that have the following terminal responses:
  261  * - "OK"
  262  * - "NO CARRIER"
  263  * - "NO DIALTONE"
  264  * - "BUSY"
  265  * - "NO ANSWSER"
  266  * - "ERROR"
  267  * - "+CME ERROR"
  268  * - "+CMS ERROR"
  269  *
  270  * AT commands executed through the bridge do not support text mode (e.g.; +CMGS) or data mode
  271  * (e.g.; ATD*99***1#). Sending these commands through the bridge may lock the Legato AT commands
  272  * parser.
  273  *
  274  * @image html atCommandsParserBridge.png
  275  *
  276  * @note AT commands server is opened on the file descriptor fd1 using le_atServer_Open() API.
  277  * AT commands server is bridged on the file descriptor fd2 using le_atServer_OpenBridge() API.
  278  *
  279  * A device can be remove from a bridge thanks to le_atServer_RemoveDeviceFromBridge() API.
  280  * A bridge can be closed using le_atServer_CloseBridge() API.
  281  *
  282  * @warning Some modem AT commands may conflict with Legato APIs; using both may cause problems that
  283  * can be difficult to diagnose. The modem AT commands should be avoided whenever possible, and
  284  * should only be used with great care.
  285  *
  286  * The application can send an unsolicited on all opened device, or only one on a dedicated device.
  287  *
  288  *
  289  * Copyright (C) Sierra Wireless Inc.
  290  */
  291 /**
  292  * @file le_atServer_interface.h
  293  *
  294  * Legato @ref c_atServer include file.
  295  *
  296  * Copyright (C) Sierra Wireless Inc.
  297  */
  298 
  299 #ifndef LE_ATSERVER_INTERFACE_H_INCLUDE_GUARD
  300 #define LE_ATSERVER_INTERFACE_H_INCLUDE_GUARD
  301 
  302 
  303 #include "legato.h"
  304 
  305 // Interface specific includes
  306 #include "le_atDefs_interface.h"
  307 
  308 // Internal includes for this interface
  309 #include "le_atServer_common.h"
  310 //--------------------------------------------------------------------------------------------------
  311 /**
  312  * Type for handler called when a server disconnects.
  313  */
  314 //--------------------------------------------------------------------------------------------------
  315 typedef void (*le_atServer_DisconnectHandler_t)(void *);
  316 
  317 //--------------------------------------------------------------------------------------------------
  318 /**
  319  *
  320  * Connect the current client thread to the service providing this API. Block until the service is
  321  * available.
  322  *
  323  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  324  * called before any other functions in this API.  Normally, ConnectService is automatically called
  325  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  326  *
  327  * This function is created automatically.
  328  */
  329 //--------------------------------------------------------------------------------------------------
  330 void le_atServer_ConnectService
  331 (
  332     void
  333 );
  334 
  335 //--------------------------------------------------------------------------------------------------
  336 /**
  337  *
  338  * Try to connect the current client thread to the service providing this API. Return with an error
  339  * if the service is not available.
  340  *
  341  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  342  * called before any other functions in this API.  Normally, ConnectService is automatically called
  343  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  344  *
  345  * This function is created automatically.
  346  *
  347  * @return
  348  *  - LE_OK if the client connected successfully to the service.
  349  *  - LE_UNAVAILABLE if the server is not currently offering the service to which the client is
  350  *    bound.
  351  *  - LE_NOT_PERMITTED if the client interface is not bound to any service (doesn't have a binding).
  352  *  - LE_COMM_ERROR if the Service Directory cannot be reached.
  353  */
  354 //--------------------------------------------------------------------------------------------------
  355 le_result_t le_atServer_TryConnectService
  356 (
  357     void
  358 );
  359 
  360 //--------------------------------------------------------------------------------------------------
  361 /**
  362  * Set handler called when server disconnection is detected.
  363  *
  364  * When a server connection is lost, call this handler then exit with LE_FATAL.  If a program wants
  365  * to continue without exiting, it should call longjmp() from inside the handler.
  366  */
  367 //--------------------------------------------------------------------------------------------------
  368 LE_FULL_API void le_atServer_SetServerDisconnectHandler
  369 (
  370     le_atServer_DisconnectHandler_t disconnectHandler,
  371     void *contextPtr
  372 );
  373 
  374 //--------------------------------------------------------------------------------------------------
  375 /**
  376  *
  377  * Disconnect the current client thread from the service providing this API.
  378  *
  379  * Normally, this function doesn't need to be called. After this function is called, there's no
  380  * longer a connection to the service, and the functions in this API can't be used. For details, see
  381  * @ref apiFilesC_client.
  382  *
  383  * This function is created automatically.
  384  */
  385 //--------------------------------------------------------------------------------------------------
  386 void le_atServer_DisconnectService
  387 (
  388     void
  389 );
  390 
  391 
  392 //--------------------------------------------------------------------------------------------------
  393 /**
  394  *  Reference type for an AT command.
  395  */
  396 //--------------------------------------------------------------------------------------------------
  397 
  398 
  399 //--------------------------------------------------------------------------------------------------
  400 /**
  401  *  Reference type for a AT command device.
  402  */
  403 //--------------------------------------------------------------------------------------------------
  404 
  405 
  406 //--------------------------------------------------------------------------------------------------
  407 /**
  408  *  Reference type for a AT commands server / AT commands client bridge.
  409  */
  410 //--------------------------------------------------------------------------------------------------
  411 
  412 
  413 //--------------------------------------------------------------------------------------------------
  414 /**
  415  *  Reference type for an error code.
  416  */
  417 //--------------------------------------------------------------------------------------------------
  418 
  419 
  420 //--------------------------------------------------------------------------------------------------
  421 /**
  422  * Received AT command type.
  423  *
  424  */
  425 //--------------------------------------------------------------------------------------------------
  426 
  427 
  428 //--------------------------------------------------------------------------------------------------
  429 /**
  430  * Final response.
  431  */
  432 //--------------------------------------------------------------------------------------------------
  433 
  434 
  435 //--------------------------------------------------------------------------------------------------
  436 /**
  437  * Device availability.
  438  */
  439 //--------------------------------------------------------------------------------------------------
  440 
  441 
  442 //--------------------------------------------------------------------------------------------------
  443 /**
  444  * Handler for platform-specific command registration.
  445  *
  446  */
  447 //--------------------------------------------------------------------------------------------------
  448 
  449 
  450 //--------------------------------------------------------------------------------------------------
  451 /**
  452  * Reference type used by Add/Remove functions for EVENT 'le_atServer_CmdRegistration'
  453  */
  454 //--------------------------------------------------------------------------------------------------
  455 
  456 
  457 //--------------------------------------------------------------------------------------------------
  458 /**
  459  * Handler for the AT command processing.
  460  *
  461  * @note The argument "parametersNumber" is set only when "type" parameter value is
  462  * LE_AT_SERVER_TYPE_PARA
  463  */
  464 //--------------------------------------------------------------------------------------------------
  465 
  466 
  467 //--------------------------------------------------------------------------------------------------
  468 /**
  469  * Reference type used by Add/Remove functions for EVENT 'le_atServer_Command'
  470  */
  471 //--------------------------------------------------------------------------------------------------
  472 
  473 
  474 //--------------------------------------------------------------------------------------------------
  475 /**
  476  * Get text callback
  477  *
  478  * @return
  479  *      - LE_OK: The function succeeded
  480  *      - LE_IO_ERROR: An io error happened and the function couldn't read from the device
  481  *      - LE_FORMAT_ERROR: Received an invalid character or an invalid sequence
  482  *      - LE_FAULT: Failed to remove backspaces
  483  */
  484 //--------------------------------------------------------------------------------------------------
  485 
  486 
  487 //--------------------------------------------------------------------------------------------------
  488 /**
  489  * Suspend server / enter data mode
  490  *
  491  * When this function is called the server stops monitoring the fd for events
  492  * hence no more I/O operations are done on the fd by the server.
  493  *
  494  * @return
  495  *      - LE_OK             Success.
  496  *      - LE_BAD_PARAMETER  Invalid device reference.
  497  *      - LE_FAULT          Device not monitored
  498  *
  499  */
  500 //--------------------------------------------------------------------------------------------------
  501 le_result_t le_atServer_Suspend
  502 (
  503     le_atServer_DeviceRef_t device
  504         ///< [IN] device to be suspended
  505 );
  506 
  507 //--------------------------------------------------------------------------------------------------
  508 /**
  509  * Resume server / enter command mode
  510  *
  511  * When this function is called the server resumes monitoring the fd for events
  512  * and is able to interpret AT commands again.
  513  *
  514  * @return
  515  *      - LE_OK             Success.
  516  *      - LE_BAD_PARAMETER  Invalid device reference.
  517  *      - LE_FAULT          Device not monitored
  518  *
  519  */
  520 //--------------------------------------------------------------------------------------------------
  521 le_result_t le_atServer_Resume
  522 (
  523     le_atServer_DeviceRef_t device
  524         ///< [IN] device to be resumed
  525 );
  526 
  527 //--------------------------------------------------------------------------------------------------
  528 /**
  529  * This function opens an AT server session on the requested device.
  530  *
  531  * @return
  532  *      - Reference to the requested device.
  533  *      - NULL if the device is not available or fd is a BAD FILE DESCRIPTOR.
  534  *
  535  * @note Make sure to duplicate (man dup) your file descriptor before opening
  536  *       a server session to be able to use the suspend/resume feature
  537  *
  538  */
  539 //--------------------------------------------------------------------------------------------------
  540 le_atServer_DeviceRef_t le_atServer_Open
  541 (
  542     int fd
  543         ///< [IN] File descriptor.
  544 );
  545 
  546 //--------------------------------------------------------------------------------------------------
  547 /**
  548  * This function closes the AT server session on the requested device.
  549  *
  550  * @return
  551  *      - LE_OK             The function succeeded.
  552  *      - LE_BAD_PARAMETER  Invalid device reference.
  553  *      - LE_BUSY           The requested device is busy.
  554  *      - LE_FAULT          Failed to stop the server, check logs
  555  *                              for more information.
  556  */
  557 //--------------------------------------------------------------------------------------------------
  558 le_result_t le_atServer_Close
  559 (
  560     le_atServer_DeviceRef_t device
  561         ///< [IN] device to be unbound
  562 );
  563 
  564 //--------------------------------------------------------------------------------------------------
  565 /**
  566  * This function created an AT command and register it into the AT parser.
  567  *
  568  * @return
  569  *      - Reference to the AT command.
  570  *      - NULL if an error occurs.
  571  */
  572 //--------------------------------------------------------------------------------------------------
  573 le_atServer_CmdRef_t le_atServer_Create
  574 (
  575     const char* LE_NONNULL name
  576         ///< [IN] AT command name string
  577 );
  578 
  579 //--------------------------------------------------------------------------------------------------
  580 /**
  581  * This function deletes an AT command (i.e. unregister from the AT parser).
  582  *
  583  * @return
  584  *      - LE_OK            The function succeeded.
  585  *      - LE_FAULT         The function failed to delete the command.
  586  *      - LE_BUSY          Command is in progress.
  587  *
  588  */
  589 //--------------------------------------------------------------------------------------------------
  590 le_result_t le_atServer_Delete
  591 (
  592     le_atServer_CmdRef_t commandRef
  593         ///< [IN] AT command reference
  594 );
  595 
  596 //--------------------------------------------------------------------------------------------------
  597 /**
  598  * Add handler function for EVENT 'le_atServer_CmdRegistration'
  599  *
  600  * This event provides information when a new AT command is subscribed.
  601  *
  602  */
  603 //--------------------------------------------------------------------------------------------------
  604 le_atServer_CmdRegistrationHandlerRef_t le_atServer_AddCmdRegistrationHandler
  605 (
  606     le_atServer_CmdRegistrationHandlerFunc_t handlerPtr,
  607         ///< [IN] Handler to called when a new AT command
  608         ///< is subscribed
  609     void* contextPtr
  610         ///< [IN]
  611 );
  612 
  613 //--------------------------------------------------------------------------------------------------
  614 /**
  615  * Remove handler function for EVENT 'le_atServer_CmdRegistration'
  616  */
  617 //--------------------------------------------------------------------------------------------------
  618 void le_atServer_RemoveCmdRegistrationHandler
  619 (
  620     le_atServer_CmdRegistrationHandlerRef_t handlerRef
  621         ///< [IN]
  622 );
  623 
  624 //--------------------------------------------------------------------------------------------------
  625 /**
  626  * Add handler function for EVENT 'le_atServer_Command'
  627  *
  628  * This event provides information when the AT command is detected.
  629  *
  630  */
  631 //--------------------------------------------------------------------------------------------------
  632 le_atServer_CommandHandlerRef_t le_atServer_AddCommandHandler
  633 (
  634     le_atServer_CmdRef_t commandRef,
  635         ///< [IN] AT command reference
  636     le_atServer_CommandHandlerFunc_t handlerPtr,
  637         ///< [IN] Handler to called when the AT command is detected
  638     void* contextPtr
  639         ///< [IN]
  640 );
  641 
  642 //--------------------------------------------------------------------------------------------------
  643 /**
  644  * Remove handler function for EVENT 'le_atServer_Command'
  645  */
  646 //--------------------------------------------------------------------------------------------------
  647 void le_atServer_RemoveCommandHandler
  648 (
  649     le_atServer_CommandHandlerRef_t handlerRef
  650         ///< [IN]
  651 );
  652 
  653 //--------------------------------------------------------------------------------------------------
  654 /**
  655  * This function can be used to get the parameters of a received AT command.
  656  *
  657  * @return
  658  *      - LE_OK            The function succeeded.
  659  *      - LE_FAULT         The function failed to get the requested parameter.
  660  *
  661  * @note If the parameter is parsed with quotes, the quotes are removed when retrieving the
  662  * parameter value using this API. If a parmeter is not parsed with quotes, that parameter is
  663  * converted to uppercase equivalent.
  664  *
  665  */
  666 //--------------------------------------------------------------------------------------------------
  667 le_result_t le_atServer_GetParameter
  668 (
  669     le_atServer_CmdRef_t commandRef,
  670         ///< [IN] AT command reference
  671     uint32_t index,
  672         ///< [IN] agument index
  673     char* parameter,
  674         ///< [OUT] parameter value
  675     size_t parameterSize
  676         ///< [IN]
  677 );
  678 
  679 //--------------------------------------------------------------------------------------------------
  680 /**
  681  * This function can be used to get the AT command string.
  682  *
  683  * @return
  684  *      - LE_OK            The function succeeded.
  685  *      - LE_FAULT         The function failed to get the AT command string.
  686  *
  687  */
  688 //--------------------------------------------------------------------------------------------------
  689 le_result_t le_atServer_GetCommandName
  690 (
  691     le_atServer_CmdRef_t commandRef,
  692         ///< [IN] AT command reference
  693     char* name,
  694         ///< [OUT] AT command string
  695     size_t nameSize
  696         ///< [IN]
  697 );
  698 
  699 //--------------------------------------------------------------------------------------------------
  700 /**
  701  * This function can be used to get the device reference in use for an AT command specified with
  702  * its reference.
  703  *
  704  * @return
  705  *      - LE_OK            The function succeeded.
  706  *      - LE_FAULT         The function failed to get the AT command string.
  707  *
  708  */
  709 //--------------------------------------------------------------------------------------------------
  710 le_result_t le_atServer_GetDevice
  711 (
  712     le_atServer_CmdRef_t commandRef,
  713         ///< [IN] AT command reference
  714     le_atServer_DeviceRef_t* deviceRefPtr
  715         ///< [OUT] Device reference
  716 );
  717 
  718 //--------------------------------------------------------------------------------------------------
  719 /**
  720  * This function can be used to send an intermediate response.
  721  *
  722  * @return
  723  *      - LE_OK            The function succeeded.
  724  *      - LE_FAULT         The function failed to send the intermediate response.
  725  *
  726  */
  727 //--------------------------------------------------------------------------------------------------
  728 le_result_t le_atServer_SendIntermediateResponse
  729 (
  730     le_atServer_CmdRef_t commandRef,
  731         ///< [IN] AT command reference
  732     const char* LE_NONNULL intermediateRsp
  733         ///< [IN] Intermediate response to be
  734         ///< sent
  735 );
  736 
  737 //--------------------------------------------------------------------------------------------------
  738 /**
  739  * This function can be used to send the final response.
  740  *
  741  * @deprecated le_atServer_SendFinalResponse() should not be used anymore and will be removed soon.
  742  * It has been replaced by le_atServer_SendFinalResultCode()
  743  *
  744  * @return
  745  *      - LE_OK            The function succeeded.
  746  *      - LE_FAULT         The function failed to send the final response.
  747  *
  748  */
  749 //--------------------------------------------------------------------------------------------------
  750 le_result_t le_atServer_SendFinalResponse
  751 (
  752     le_atServer_CmdRef_t commandRef,
  753         ///< [IN] AT command reference
  754     le_atServer_FinalRsp_t finalResponse,
  755         ///< [IN] Final response to be sent
  756     bool customStringAvailable,
  757         ///< [IN] Custom final response has to be sent
  758         ///< instead of the default one.
  759     const char* LE_NONNULL finalRsp
  760         ///< [IN] custom final response string
  761 );
  762 
  763 //--------------------------------------------------------------------------------------------------
  764 /**
  765  * This function can be used to send the final result code.
  766  *
  767  * @return
  768  *      - LE_OK            The function succeeded.
  769  *      - LE_FAULT         The function failed to send the final result code.
  770  *
  771  */
  772 //--------------------------------------------------------------------------------------------------
  773 le_result_t le_atServer_SendFinalResultCode
  774 (
  775     le_atServer_CmdRef_t commandRef,
  776         ///< [IN] AT command reference
  777     le_atServer_FinalRsp_t finalResult,
  778         ///< [IN] Final result code to be sent
  779     const char* LE_NONNULL pattern,
  780         ///< [IN] Prefix of the return message
  781     uint32_t errorCode
  782         ///< [IN] Numeric error code
  783 );
  784 
  785 //--------------------------------------------------------------------------------------------------
  786 /**
  787  * This function can be used to send the unsolicited response.
  788  *
  789  * @return
  790  *      - LE_OK            The function succeeded.
  791  *      - LE_FAULT         The function failed to send the unsolicited response.
  792  *
  793  */
  794 //--------------------------------------------------------------------------------------------------
  795 le_result_t le_atServer_SendUnsolicitedResponse
  796 (
  797     const char* LE_NONNULL unsolRsp,
  798         ///< [IN] Unsolicited response to be
  799         ///< sent
  800     le_atServer_AvailableDevice_t availableDevice,
  801         ///< [IN] device to send the
  802         ///< unsolicited response
  803     le_atServer_DeviceRef_t device
  804         ///< [IN] device reference where the
  805         ///< unsolicited response has to
  806         ///< be sent
  807 );
  808 
  809 //--------------------------------------------------------------------------------------------------
  810 /**
  811  * This function enables echo on the selected device.
  812  *
  813  * @return
  814  *      - LE_OK             The function succeeded.
  815  *      - LE_BAD_PARAMETER  Invalid device reference.
  816  */
  817 //--------------------------------------------------------------------------------------------------
  818 le_result_t le_atServer_EnableEcho
  819 (
  820     le_atServer_DeviceRef_t device
  821         ///< [IN] device reference
  822 );
  823 
  824 //--------------------------------------------------------------------------------------------------
  825 /**
  826  * This function disables echo on the selected device.
  827  *
  828  * @return
  829  *      - LE_OK             The function succeeded.
  830  *      - LE_BAD_PARAMETER  Invalid device reference.
  831  */
  832 //--------------------------------------------------------------------------------------------------
  833 le_result_t le_atServer_DisableEcho
  834 (
  835     le_atServer_DeviceRef_t device
  836         ///< [IN] device reference
  837 );
  838 
  839 //--------------------------------------------------------------------------------------------------
  840 /**
  841  * This function opens a AT commands server bridge.
  842  * All unknown AT commands will be sent on this alternative file descriptor thanks to the AT client
  843  * Service.
  844  *
  845  * @return
  846  *      - Reference to the requested bridge.
  847  *      - NULL if the device can't be bridged
  848  */
  849 //--------------------------------------------------------------------------------------------------
  850 le_atServer_BridgeRef_t le_atServer_OpenBridge
  851 (
  852     int fd
  853         ///< [IN] File descriptor.
  854 );
  855 
  856 //--------------------------------------------------------------------------------------------------
  857 /**
  858  * This function closes an opened bridge.
  859  *
  860  * @return
  861  *      - LE_OK            The function succeeded.
  862  *      - LE_FAULT         The function failed to close the bridge.
  863  *      - LE_BUSY          The bridge is in use (devices references have to be removed first).
  864  */
  865 //--------------------------------------------------------------------------------------------------
  866 le_result_t le_atServer_CloseBridge
  867 (
  868     le_atServer_BridgeRef_t bridgeRef
  869         ///< [IN] Bridge reference
  870 );
  871 
  872 //--------------------------------------------------------------------------------------------------
  873 /**
  874  * This function adds a device to an opened bridge.
  875  *
  876  * @return
  877  *      - LE_OK            The function succeeded.
  878  *      - LE_BUSY          The device is already used by the bridge.
  879  *      - LE_FAULT         The function failed to add the device to the bridge.
  880  */
  881 //--------------------------------------------------------------------------------------------------
  882 le_result_t le_atServer_AddDeviceToBridge
  883 (
  884     le_atServer_DeviceRef_t deviceRef,
  885         ///< [IN] Device reference to add to the bridge
  886     le_atServer_BridgeRef_t bridgeRef
  887         ///< [IN] Bridge refence
  888 );
  889 
  890 //--------------------------------------------------------------------------------------------------
  891 /**
  892  * This function removes a device from a bridge
  893  *
  894  * @return
  895  *      - LE_OK            The function succeeded.
  896  *      - LE_NOT_FOUND     The device is not isued by the specified bridge
  897  *      - LE_BUSY          The device is currently in use
  898  *      - LE_FAULT         The function failed to add the device to the bridge.
  899  */
  900 //--------------------------------------------------------------------------------------------------
  901 le_result_t le_atServer_RemoveDeviceFromBridge
  902 (
  903     le_atServer_DeviceRef_t deviceRef,
  904         ///< [IN] Device reference to add to the bridge
  905     le_atServer_BridgeRef_t bridgeRef
  906         ///< [IN] Bridge refence
  907 );
  908 
  909 //--------------------------------------------------------------------------------------------------
  910 /**
  911  * This function enables verbose error codes on the selected device.
  912  */
  913 //--------------------------------------------------------------------------------------------------
  914 void le_atServer_EnableVerboseErrorCodes
  915 (
  916     void
  917 );
  918 
  919 //--------------------------------------------------------------------------------------------------
  920 /**
  921  * This function enables extended error codes on the selected device.
  922  */
  923 //--------------------------------------------------------------------------------------------------
  924 void le_atServer_EnableExtendedErrorCodes
  925 (
  926     void
  927 );
  928 
  929 //--------------------------------------------------------------------------------------------------
  930 /**
  931  * This function disables extended error codes on the selected device.
  932  */
  933 //--------------------------------------------------------------------------------------------------
  934 void le_atServer_DisableExtendedErrorCodes
  935 (
  936     void
  937 );
  938 
  939 //--------------------------------------------------------------------------------------------------
  940 /**
  941  * This function creates a custom error code.
  942  * @return
  943  *      - ErrorCode    Reference to the created error code
  944  *      - NULL         Function failed to create the error code
  945  *
  946  * @note This function fails to create the error code if the combinaison (errorCode, pattern)
  947  * already exists or if the errorCode number is lower than 512.
  948  *
  949  */
  950 //--------------------------------------------------------------------------------------------------
  951 le_atServer_ErrorCodeRef_t le_atServer_CreateErrorCode
  952 (
  953     uint32_t errorCode,
  954         ///< [IN] Numerical error code
  955     const char* LE_NONNULL pattern
  956         ///< [IN] Prefix of the response message
  957 );
  958 
  959 //--------------------------------------------------------------------------------------------------
  960 /**
  961  * This function deletes a custom error code.
  962  *
  963  * @return
  964  *      - LE_OK            The function succeeded
  965  *      - LE_FAULT         The function failed to delete the error code
  966  */
  967 //--------------------------------------------------------------------------------------------------
  968 le_result_t le_atServer_DeleteErrorCode
  969 (
  970     le_atServer_ErrorCodeRef_t errorCodeRef
  971         ///< [IN] Error code reference
  972 );
  973 
  974 //--------------------------------------------------------------------------------------------------
  975 /**
  976  * This function adds a verbose message to a specified error code
  977  *
  978  * @return
  979  *      - LE_OK            The function succeeded
  980  *      - LE_FAULT         The function failed to set the verbose message
  981  */
  982 //--------------------------------------------------------------------------------------------------
  983 le_result_t le_atServer_SetVerboseErrorCode
  984 (
  985     le_atServer_ErrorCodeRef_t errorCodeRef,
  986         ///< [IN] Error code reference
  987     const char* LE_NONNULL verboseCode
  988         ///< [IN] Verbose message
  989 );
  990 
  991 //--------------------------------------------------------------------------------------------------
  992 /**
  993  * This function allows the user to register a le_atServer_GetTextCallback_t callback
  994  * to retrieve text and sends a prompt <CR><LF><greater_than><SPACE> on the current command's
  995  * device.
  996  *
  997  * @return
  998  *      - LE_OK             The function succeeded.
  999  *      - LE_BAD_PARAMETER  Invalid device or command reference.
 1000  */
 1001 //--------------------------------------------------------------------------------------------------
 1002 le_result_t le_atServer_GetTextAsync
 1003 (
 1004     le_atServer_CmdRef_t cmdRef,
 1005         ///< [IN] AT command reference
 1006     le_atServer_GetTextCallbackFunc_t callbackPtr,
 1007         ///< [IN] Get text callback
 1008     void* contextPtr
 1009         ///< [IN]
 1010 );
 1011 
 1012 #endif // LE_ATSERVER_INTERFACE_H_INCLUDE_GUARD
le_atServer_Close
le_result_t le_atServer_Close(le_atServer_DeviceRef_t device)
le_atServer_DisconnectHandler_t
void(* le_atServer_DisconnectHandler_t)(void *)
Definition: le_atServer_interface.h:315
le_result_t
le_result_t
Definition: le_basics.h:35
le_atServer_TryConnectService
le_result_t le_atServer_TryConnectService(void)
le_atServer_RemoveDeviceFromBridge
le_result_t le_atServer_RemoveDeviceFromBridge(le_atServer_DeviceRef_t deviceRef, le_atServer_BridgeRef_t bridgeRef)
le_atServer_EnableExtendedErrorCodes
void le_atServer_EnableExtendedErrorCodes(void)
le_atServer_GetParameter
le_result_t le_atServer_GetParameter(le_atServer_CmdRef_t commandRef, uint32_t index, char *parameter, size_t parameterSize)
le_atServer_GetCommandName
le_result_t le_atServer_GetCommandName(le_atServer_CmdRef_t commandRef, char *name, size_t nameSize)
le_atServer_AddCmdRegistrationHandler
le_atServer_CmdRegistrationHandlerRef_t le_atServer_AddCmdRegistrationHandler(le_atServer_CmdRegistrationHandlerFunc_t handlerPtr, void *contextPtr)
le_atDefs_interface.h
le_atServer_GetDevice
le_result_t le_atServer_GetDevice(le_atServer_CmdRef_t commandRef, le_atServer_DeviceRef_t *deviceRefPtr)
le_atServer_SetVerboseErrorCode
le_result_t le_atServer_SetVerboseErrorCode(le_atServer_ErrorCodeRef_t errorCodeRef, const char *LE_NONNULL verboseCode)
le_atServer_EnableEcho
le_result_t le_atServer_EnableEcho(le_atServer_DeviceRef_t device)
le_atServer_AddCommandHandler
le_atServer_CommandHandlerRef_t le_atServer_AddCommandHandler(le_atServer_CmdRef_t commandRef, le_atServer_CommandHandlerFunc_t handlerPtr, void *contextPtr)
le_atServer_Open
le_atServer_DeviceRef_t le_atServer_Open(int fd)
le_atServer_Create
le_atServer_CmdRef_t le_atServer_Create(const char *LE_NONNULL name)
le_atServer_ConnectService
void le_atServer_ConnectService(void)
le_atServer_AddDeviceToBridge
le_result_t le_atServer_AddDeviceToBridge(le_atServer_DeviceRef_t deviceRef, le_atServer_BridgeRef_t bridgeRef)
le_atServer_Resume
le_result_t le_atServer_Resume(le_atServer_DeviceRef_t device)
le_atServer_Delete
le_result_t le_atServer_Delete(le_atServer_CmdRef_t commandRef)
le_atServer_CloseBridge
le_result_t le_atServer_CloseBridge(le_atServer_BridgeRef_t bridgeRef)
le_atServer_SetServerDisconnectHandler
LE_FULL_API void le_atServer_SetServerDisconnectHandler(le_atServer_DisconnectHandler_t disconnectHandler, void *contextPtr)
LE_FULL_API
#define LE_FULL_API
Definition: le_apiFeatures.h:40
le_atServer_SendFinalResponse
le_result_t le_atServer_SendFinalResponse(le_atServer_CmdRef_t commandRef, le_atServer_FinalRsp_t finalResponse, bool customStringAvailable, const char *LE_NONNULL finalRsp)
le_atServer_EnableVerboseErrorCodes
void le_atServer_EnableVerboseErrorCodes(void)
le_atServer_RemoveCommandHandler
void le_atServer_RemoveCommandHandler(le_atServer_CommandHandlerRef_t handlerRef)
le_atServer_Suspend
le_result_t le_atServer_Suspend(le_atServer_DeviceRef_t device)
le_atServer_GetTextAsync
le_result_t le_atServer_GetTextAsync(le_atServer_CmdRef_t cmdRef, le_atServer_GetTextCallbackFunc_t callbackPtr, void *contextPtr)
le_atServer_RemoveCmdRegistrationHandler
void le_atServer_RemoveCmdRegistrationHandler(le_atServer_CmdRegistrationHandlerRef_t handlerRef)
le_atServer_DisableExtendedErrorCodes
void le_atServer_DisableExtendedErrorCodes(void)
le_atServer_SendIntermediateResponse
le_result_t le_atServer_SendIntermediateResponse(le_atServer_CmdRef_t commandRef, const char *LE_NONNULL intermediateRsp)
le_atServer_CreateErrorCode
le_atServer_ErrorCodeRef_t le_atServer_CreateErrorCode(uint32_t errorCode, const char *LE_NONNULL pattern)
le_atServer_DisconnectService
void le_atServer_DisconnectService(void)
le_atServer_SendUnsolicitedResponse
le_result_t le_atServer_SendUnsolicitedResponse(const char *LE_NONNULL unsolRsp, le_atServer_AvailableDevice_t availableDevice, le_atServer_DeviceRef_t device)
le_atServer_DisableEcho
le_result_t le_atServer_DisableEcho(le_atServer_DeviceRef_t device)
le_atServer_SendFinalResultCode
le_result_t le_atServer_SendFinalResultCode(le_atServer_CmdRef_t commandRef, le_atServer_FinalRsp_t finalResult, const char *LE_NONNULL pattern, uint32_t errorCode)
le_atServer_OpenBridge
le_atServer_BridgeRef_t le_atServer_OpenBridge(int fd)
le_atServer_DeleteErrorCode
le_result_t le_atServer_DeleteErrorCode(le_atServer_ErrorCodeRef_t errorCodeRef)