le_sim_interface.h

Go to the documentation of this file.
    1 
    2 
    3 /*
    4  * ====================== WARNING ======================
    5  *
    6  * THE CONTENTS OF THIS FILE HAVE BEEN AUTO-GENERATED.
    7  * DO NOT MODIFY IN ANY WAY.
    8  *
    9  * ====================== WARNING ======================
   10  */
   11 
   12 /**
   13  * @page c_sim SIM
   14  *
   15  * @ref le_sim_interface.h "API Reference" <br>
   16  * @ref platformConstraintsSim "SIM constraints"
   17  *
   18  * <HR>
   19  *
   20  * This file contains prototype definitions for SIM API.
   21  *
   22  * A subscriber identity module or subscriber identification module (SIM) is an integrated circuit
   23  * that securely stores the international mobile subscriber identity (IMSI) and related key used to
   24  * identify and authenticate subscribers on M2M devices.
   25  *
   26  * Most SIM cards can store a number of SMS messages and phone book contacts.
   27  *
   28  * @section le_sim_binding IPC interfaces binding
   29  *
   30  * All the functions of this API are provided by the @b modemService.
   31  *
   32  * Here's a code sample binding to modem services:
   33  * @verbatim
   34    bindings:
   35    {
   36       clientExe.clientComponent.le_sim -> modemService.le_sim
   37    }
   38    @endverbatim
   39  *
   40  *
   41  * @section le_sim_SelectCard Select a card to use
   42  * le_sim_SelectCard() function is used to select the SIM identifier. By default, the SIM in slot 1
   43  * is used unless the automatic SIM selection is enabled. See @ref le_sim_AutomaticSelection for
   44  * further details.
   45  * Additionally, any Legato SIM API with a SIM card identifier passed in parameter, selects that
   46  * SIM identifier. le_sim_GetSelectedCard() returns the current selected card, not necessarily the
   47  * one set previously by le_sim_SelectCard().
   48  *
   49  * @note The SIM selection is not reset persistent; this function has to be called at each start-up.
   50  *
   51  * @note It is recommended to wait for a SIM handler notification after a new SIM selection before
   52  * calling le_sim API functions.
   53  *
   54  * A sample code can be seen in the following page:
   55  * - @subpage c_simTestSelect
   56  *
   57  * @section le_sim_AutomaticSelection Automatic SIM selection
   58  * This feature is only relevant for modules with an internal SIM card. When enabled, the module
   59  * automatically selects a SIM slot according to the rule: "If an external SIM is inserted in slot 1
   60  * then select it. Otherwise, fall back to the internal SIM card".
   61  *
   62  * Use the following APIs to manage the feature:
   63  * - le_sim_SetAutomaticSelection(): Enable/Disable the automatic SIM selection.
   64  * - le_sim_GetAutomaticSelection(): Get the current automatic SIM selection state.
   65  *
   66  * @note Most of le_sim APIs require a SIM identifier in their arguments. If a client application
   67  * uses a SIM identifier different from the one selected by automatic SIM selection, the feature
   68  * will be immediately disabled.
   69  * Thus, in order to use le_sim APIs in automatic SIM selection, client application must use
   70  * LE_SIM_UNSPECIFIED as a SIM identifier (@ref le_sim_Id_t).
   71  *
   72  *
   73  * @section le_sim_id SIM identification information
   74  * \b ICCID:
   75  * Each SIM is internationally identified by its integrated circuit card identifier (ICCID). ICCIDs
   76  * are stored in the SIM cards and engraved or printed on the SIM card body.
   77  * The ICCID is defined by the ITU-T recommendation E.118 as the
   78  * Primary Account Number. According to E.118, the number is up to 19 digits long, including a
   79  * single check digit calculated using the Luhn algorithm. However, the GSM Phase 1 (ETSI
   80  * Recommendation GSM 11.11) defined the ICCID length as 10 octets (20 digits) with
   81  * operator-specific structure.
   82  *
   83  * le_sim_GetICCID() API reads the identification number (ICCID).
   84  * le_sim_AddIccidChangeHandler() function registers a handler to be notified when ICCID changes.
   85  * le_sim_RemoveIccidChangeHandler() function unregisters the handler.
   86  *
   87  * @note During the initialization phase of the service, each new subscription to the ICCID change
   88  * event is notified by the last change event. This behavior lasts only for 5 seconds and allows
   89  * freshly registered clients to receive any ICCID changes that occured during the module start-up
   90  * phase.
   91  *
   92  * Using this API selects the requested SIM.
   93  *
   94  * \b IMSI:
   95  * The International Mobile Subscriber Identity or IMSI is a unique identification associated with
   96  * all cellular networks. The IMSI is used in any mobile network that connects with other
   97  * networks. For GSM, UMTS and LTE network, this number is provisioned in the SIM card.
   98  *
   99  * An IMSI is usually presented as a 15 digit long number, but can be shorter. The first 3 digits
  100  * are the mobile country code (MCC), are followed by the mobile network code (MNC), either 2
  101  * digits (European standard) or 3 digits (North American standard). The length of the MNC depends
  102  * on the value of the MCC. The remaining digits are the mobile subscription identification number
  103  * (MSIN) within the network's customer base.
  104  *
  105  * \b EID:
  106  * The EID (also called eUICCID) is the unique identifier for the embedded Universal Integrated
  107  * Circuit Card (eUICC).
  108  * A eUICC is a SIM card with a remote provisioning function, and is designed to not be removed or
  109  * changed. It is able to store multiple communication profiles but only one is enabled (recognized
  110  * by the device and used for communication). With conventional SIM cards, the ICCID is used as the
  111  * unique key to identify the SIM card, but with eUICC, the ICCID is the key used to identify a
  112  * profile, and a new identifier is defined, called the eUICCID (EID), which is used as the unique
  113  * key for the embedded SIM.
  114  * le_sim_GetEID() API reads the EID.
  115  *
  116  * \b Home \b Network \b Name:
  117  * le_sim_GetHomeNetworkOperator() retrieves the Home Network Name.
  118  *
  119  * le_sim_GetIMSI() API reads the international mobile subscriber identity (IMSI).
  120  *
  121  * Using this API selects the requested SIM.
  122  *
  123  * \b Phone \b Number:
  124  * le_sim_GetSubscriberPhoneNumber() API reads the Phone Number associated to the SIM.
  125  * If the phone number has not been provisioned, it will return the empty string.
  126  *
  127  * Using this API selects the requested SIM.
  128  *
  129  * \b Home \b Network \b Information:
  130  * - le_sim_GetHomeNetworkOperator()function retrieves the Home Network Name.
  131  * - le_sim_GetHomeNetworkMccMnc()function retrieves the Home Network MCC (Mobile Country Code)
  132  *      and MNC (Mobile Network Code).
  133  *
  134  * A sample code can be seen in the following page:
  135  * - @subpage c_simTestIdentification
  136  *
  137  * @section le_sim_auth SIM Authentication
  138  * le_sim_EnterPIN() enters the PIN (Personal Identification Number) code that's
  139  * required before any Mobile equipment functionality can be used.
  140  *
  141  * Using this API selects the requested SIM.
  142  *
  143  * le_sim_GetRemainingPINTries() returns the number of remaining PIN entry attempts
  144  * before the SIM will become blocked.
  145  *
  146  * Using this API selects the requested SIM.
  147  *
  148  * le_sim_GetRemainingPUKTries() returns the number of remaining PUK entry attempts
  149  * before the SIM will become blocked.
  150  *
  151  * Using this API selects the requested SIM.
  152  *
  153  * le_sim_ChangePIN() must be called to change the PIN code.
  154  *
  155  * Using this API selects the requested SIM.
  156  *
  157  *  le_sim_Lock() locks the SIM card: it enables requests for the PIN code.
  158  *
  159  * Using this API selects the requested SIM.
  160  *
  161  *  le_sim_Unlock() unlocks the SIM card: it disables requests for the PIN code.
  162  *
  163  * Using this API selects the requested SIM.
  164  *
  165  * le_sim_Unblock() unblocks the SIM card. The SIM card is blocked after X unsuccessful
  166  * attempts to enter the PIN. le_sim_Unblock() requires the PUK (Personal Unblocking) code
  167  * to set a new PIN code.
  168  *
  169  * A sample code can be seen in the following page:
  170  * - @subpage c_simTestAuthentication
  171  *
  172  * @section le_sim_state SIM states
  173  * le_sim_IsPresent() API advises the SIM is inserted (and locked) or removed.
  174  *
  175  * Using this API selects the requested SIM.
  176  *
  177  * le_sim_IsReady() API advises the SIM is ready (PIN code correctly entered
  178  * or not required).
  179  *
  180  * Using this API selects the requested SIM.
  181  *
  182  * The le_sim_GetState() API retrieves the SIM state:
  183  * - LE_SIM_INSERTED      : SIM card is inserted and locked.
  184  * - LE_SIM_ABSENT        : SIM card is absent.
  185  * - LE_SIM_READY         : SIM card is inserted and unlocked.
  186  * - LE_SIM_BLOCKED       : SIM card is blocked.
  187  * - LE_SIM_BUSY          : SIM card is busy.
  188  * - LE_SIM_POWER_DOWN    : SIM card is powered down.
  189  * - LE_SIM_STATE_UNKNOWN : Unknown SIM state.
  190  *
  191  * Using this API selects the requested SIM.
  192  *
  193  * A handler function must be registered to receive SIM's state notifications.
  194  * le_sim_AddNewStateHandler() API allows the User to register that handler.
  195  *
  196  * The handler must satisfy the following prototype:
  197  * typedef void(*le_sim_NewStateHandlerFunc_t)(@ref le_sim_Id_t simId, @c le_sim_States_t simState);
  198  *
  199  * When a new SIM's state is notified, the handler is called.
  200  *
  201  * Call le_sim_GetState() to retrieve the new state of the SIM.
  202  *
  203  * @note If two (or more) applications have registered a handler function for notifications, they
  204  * will all receive it and will be passed the same SIM.
  205  *
  206  * The application can uninstall the handler function by calling le_sim_RemoveNewStateHandler() API.
  207  *
  208  * @warning Your platform might need a reboot to detect a SIM insertion or removal.
  209  * Please refer to the @ref platformConstraintsSim "SIM constraints" page or your platform
  210  * documentation for further details.
  211  *
  212  * A sample code can be seen in the following page:
  213  * - @subpage c_simTestStates
  214  *
  215  * le_sim_SetPower() powers up or down the current SIM card.
  216  *
  217  * @section le_sim_profile_switch SIM profile switch
  218  *
  219  * As soon as there are several subscriptions/profiles in the eUICC (multi-profile), and one of
  220  * them is dedicated to emergency calls (ex: eCall, ERA-Glonass), local swap is needed to swap as
  221  * quickly as possible to the emergency profile in case of need.
  222  *
  223  * “Local swap” means that the User's application must be able to directly request the eUICC to
  224  * swap to Emergency Call Subscription (ECS).
  225  *
  226  * Local swap puts the eUICC in a temporary state, meaning the commercial subscription is replaced
  227  * by emergency subscription for a limited time, event triggering the swap back to commercial
  228  * subscription being controlled by the User's application.
  229  *
  230  * The le_sim_LocalSwapToEmergencyCallSubscription() function requests the multi-profile eUICC to
  231  * swap to ECS and to refresh. The User's application must wait for eUICC reboot to be finished and
  232  * network connection available.
  233  *
  234  * The le_sim_LocalSwapToCommercialSubscription() function requests the multi-profile eUICC to swap
  235  * back to commercial subscription and to refresh. The User's application must wait for eUICC reboot
  236  * to be finished and network connection available.
  237  *
  238  * eUICC allows support of multiple SIM profiles. These profiles can also be managed remotely from
  239  * a Subscription Manager Server. Changing the SIM profile remotely may impact the customer
  240  * application especially if there is an ongoing data transmission. To prevent any data loss,
  241  * switching SIM profiles is subject to a user agreement. This way, the customer application will
  242  * be able to properly finalize its current procedure (emergency call for instance) before accepting
  243  * the SIM swap.
  244  *
  245  * The application can subscribe a handler using le_sim_AddProfileUpdateHandler() to monitor SIM
  246  * profile change requests. Thus, the application can choose to accept or reject the SIM profile
  247  * swap procedure using le_sim_AcceptSimToolkitCommand() or le_sim_RejectSimToolkitCommand().
  248  *
  249  * @warning
  250  * If there is no subscribed handler, the SIM service automatically accepts any SIM profile swap
  251  * request.
  252  *
  253  * The User's application can install a handler with le_sim_AddNewStateHandler() to receive eUICC's
  254  * state notifications.
  255  *
  256  * @warning
  257  * - If you use a Morpho or Oberthur card, the SIM_REFRESH PRO-ACTIVE command must be accepted with
  258  *   le_sim_AcceptSimToolkitCommand() in order to complete the profile swap procedure.
  259  * - If you use a Giesecke & Devrient (G&D) card, be sure that your platform has disabled
  260  *   security restrictions for channel management APDU commands, otherwise local SIM profile switch
  261  *   could not work.
  262  *
  263  * The le_sim_IsEmergencyCallSubscriptionSelected() function must be called to get the current
  264  * subscription.
  265  *
  266  * @warning There is no standard method to interrogate the current selected subscription. The
  267  * returned value of this function is based on the last executed local swap command. This means
  268  * that this function will always return LE_NOT_FOUND error at Legato startup.
  269  *
  270  * A sample code can be seen in the following page:
  271  * - @subpage c_simTestProfileSwitch
  272  *
  273  * @section le_sim_Reset SIM Reset
  274  *
  275  * The le_sim_Reset() function resets the SIM card.
  276  *
  277  * @section le_sim_FPLMNList Read / Write FPLMN List from SIM
  278  *
  279  * The le_sim_CreateFPLMNList() function creates the empty FPLMN list.
  280  *
  281  * The le_sim_AddFPLMNOperator() function adds the FPLMN network into FPLMN list.
  282  *
  283  * The le_sim_WriteFPLMNList() function writes FPLMN list into the SIM.
  284  *
  285  * The le_sim_ReadFPLMNList() function reads the FPLMN list from the SIM card.
  286  *
  287  * The le_sim_GetFirstFPLMNOperator() function fetches the first FPLMN operator from FPLMN list.
  288  *
  289  * The le_sim_GetNextFPLMNOperator() function fetches the next FPLMN operator from FPLMN list.
  290  *
  291  * The le_sim_DeleteFPLMNList() function releases all allocated resources associated with the
  292  * List object.
  293  *
  294  * @note Some platforms do not support FPLMN APIs. Please refer to the @ref platformConstraintsSim
  295  * "SIM constraints" page or your platform documentation for further details.
  296  *
  297  * @section le_sim_stk SIM Toolkit
  298  *
  299  * The SIM application Toolkit allows the SIM card to initiate commands or asking input from the
  300  * modem to accept/reject SIM operations.
  301  *
  302  * One of the use case is the remote provisioning of an embedded UICC (eUICC): the eUICC format
  303  * supports multiple subscription profiles, which can be remotely provisioned, updated or selected
  304  * through SIM Toolkit procedures (Bearer Independent Protocol @em BIP, SIM refresh).
  305  *
  306  * It is mainly used for in-vehicle emergency call service (eCall).
  307  *
  308  * An eUICC can be remotely managed to change the Mobile Network Operator subscription.
  309  *
  310  * The le_sim_AddSimToolkitEventHandler() API registers a handler to be notified of SIM
  311  * Toolkit events. The le_sim_RemoveSimToolkitEventHandler() API unregisters the handler.
  312  *
  313  * The last received SIM Toolkit command can:
  314  * - Either be accepted by the device with the le_sim_AcceptSimToolkitCommand() API
  315  * - Or be rejected by the device with the le_sim_RejectSimToolkitCommand() API.
  316  * Note that if no handler is registered, refresh requests are automatically accepted.
  317  *
  318  * In case the last SIM Toolkit command is a Refresh command (@ref LE_SIM_REFRESH), additional
  319  * information can be retrieved:
  320  * - The le_sim_GetSimToolkitRefreshStage() API gets the stage of the Refresh command.
  321  * - The le_sim_GetSimToolkitRefreshMode() API gets the mode of the Refresh command, as defined in
  322  *   ETSI TS 102 223 sections 6.4.7 and 8.6.
  323  *
  324  * A sample code using the SIM Toolkit APIs can be seen in the following page:
  325  * - @subpage c_simTestSimToolkit
  326  *
  327  * Information related to SIM Toolkit platform constraints can be found in the
  328  * @ref platformConstraintsStk "SIM Toolkit platform constraints" page.
  329  *
  330  * @section le_sim_access SIM access
  331  *
  332  * The SIM card content can be accessed and/or modified by several methods.
  333  *
  334  * @subsection le_sim_accessApdu APDU
  335  *
  336  * The application can send an APDU (Application Protocol Data Unit) to the SIM using
  337  * le_sim_SendApdu() API. The user must encode the APDU as specified by in recommendation 3GPP
  338  * 11.11, 3GPP 51.011, 3GPP 31.102, 3GPP 31.103 or ETSI TS 102 221.
  339  * @note Between two successive calls to le_sim_SendApdu() API, there is no locking
  340  * protection. In this situation, some command types and parameters can modify SIM files
  341  * incorrectly.
  342  *
  343  * @subsection le_sim_accessCommand Commands
  344  *
  345  * Using le_sim_SendCommand(), the application has easier but more limited access to the
  346  * SIM database. The command is transmitted to the SIM, which gives information through swi1 and
  347  * swi2 about the execution of the command (see 3GPP recommendation previously mentioned for
  348  * their coding).
  349  * Some parameters are platform dependent, see @subpage platformConstraintsSim "SIM constraints" for
  350  * their coding.
  351  *
  352  * @subsection le_sim_accessLogicalChannel Logical channels
  353  *
  354  * Logical channels are specified by the standard ETSI TS 102 221 in the section 8.7. If they are
  355  * supported by the SIM card, logical channels allow to send independent APDUs on the different
  356  * channels. In this case:
  357  * - the basic channel 0 is always available and opened.
  358  * - upon request, the card assigns a number to open a new channel. This channel remains open until
  359  *   it is explicitly closed or the SIM card is deactivated.
  360  *
  361  * Use le_sim_OpenLogicalChannel() API to open a logical channel on the SIM card. APDUs can then
  362  * be sent to the SIM card with le_sim_SendApduOnChannel(). When the logical channel is not
  363  * needed anymore, it can be closed using le_sim_CloseLogicalChannel().
  364  *
  365  * @subsection le_sim_accessSampleCode Sample code
  366  *
  367  * A sample code can be seen in the following page:
  368  * - @subpage c_simTestApdu
  369  *
  370  * <HR>
  371  *
  372  * Copyright (C) Sierra Wireless Inc.
  373  */
  374 /**
  375  * @file le_sim_interface.h
  376  *
  377  * Legato @ref c_sim include file.
  378  *
  379  * Copyright (C) Sierra Wireless Inc.
  380  */
  381 /**
  382  * @page c_simTestProfileSwitch Sample code for Local SIM profile switch
  383  *
  384  * @include "apps/test/modemServices/sim/simProfileSwap/simTestComp/simTest.c"
  385  */
  386 /**
  387  * @page c_simTestSimToolkit Sample code for Local SIM Toolkit
  388  *
  389  * @include "apps/test/modemServices/sim/simToolkit/simToolkitComp/simToolkitTest.c"
  390  */
  391 /**
  392  * @page c_simTestAuthentication Sample code for SIM Authentication
  393  *
  394  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" Define
  395  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/main.c" Print
  396  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" Authentication
  397  */
  398 /**
  399  * @page c_simTestIdentification Sample code for SIM Identification
  400  *
  401  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/main.c" Print
  402  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" Identification
  403  */
  404 /**
  405  * @page c_simTestSelect Sample code for SIM Select
  406  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" Select
  407  */
  408 /**
  409  * @page c_simTestStates Sample code for SIM States
  410  *
  411  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/main.c" Print
  412  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" Display
  413  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" State handler
  414  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" State
  415  */
  416 /**
  417  * @page c_simTestApdu Sample code for SIM access
  418  * @snippet "apps/test/modemServices/sim/simIntegrationTest/simTestComp/simTest.c" Apdu
  419  */
  420 
  421 #ifndef LE_SIM_INTERFACE_H_INCLUDE_GUARD
  422 #define LE_SIM_INTERFACE_H_INCLUDE_GUARD
  423 
  424 
  425 #include "legato.h"
  426 
  427 // Interface specific includes
  428 #include "le_mdmDefs_interface.h"
  429 
  430 // Internal includes for this interface
  431 #include "le_sim_common.h"
  432 //--------------------------------------------------------------------------------------------------
  433 /**
  434  * Type for handler called when a server disconnects.
  435  */
  436 //--------------------------------------------------------------------------------------------------
  437 typedef void (*le_sim_DisconnectHandler_t)(void *);
  438 
  439 //--------------------------------------------------------------------------------------------------
  440 /**
  441  *
  442  * Connect the current client thread to the service providing this API. Block until the service is
  443  * available.
  444  *
  445  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  446  * called before any other functions in this API.  Normally, ConnectService is automatically called
  447  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  448  *
  449  * This function is created automatically.
  450  */
  451 //--------------------------------------------------------------------------------------------------
  452 void le_sim_ConnectService
  453 (
  454     void
  455 );
  456 
  457 //--------------------------------------------------------------------------------------------------
  458 /**
  459  *
  460  * Try to connect the current client thread to the service providing this API. Return with an error
  461  * if the service is not available.
  462  *
  463  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  464  * called before any other functions in this API.  Normally, ConnectService is automatically called
  465  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  466  *
  467  * This function is created automatically.
  468  *
  469  * @return
  470  *  - LE_OK if the client connected successfully to the service.
  471  *  - LE_UNAVAILABLE if the server is not currently offering the service to which the client is
  472  *    bound.
  473  *  - LE_NOT_PERMITTED if the client interface is not bound to any service (doesn't have a binding).
  474  *  - LE_COMM_ERROR if the Service Directory cannot be reached.
  475  */
  476 //--------------------------------------------------------------------------------------------------
  477 le_result_t le_sim_TryConnectService
  478 (
  479     void
  480 );
  481 
  482 //--------------------------------------------------------------------------------------------------
  483 /**
  484  * Set handler called when server disconnection is detected.
  485  *
  486  * When a server connection is lost, call this handler then exit with LE_FATAL.  If a program wants
  487  * to continue without exiting, it should call longjmp() from inside the handler.
  488  */
  489 //--------------------------------------------------------------------------------------------------
  490 LE_FULL_API void le_sim_SetServerDisconnectHandler
  491 (
  492     le_sim_DisconnectHandler_t disconnectHandler,
  493     void *contextPtr
  494 );
  495 
  496 //--------------------------------------------------------------------------------------------------
  497 /**
  498  *
  499  * Disconnect the current client thread from the service providing this API.
  500  *
  501  * Normally, this function doesn't need to be called. After this function is called, there's no
  502  * longer a connection to the service, and the functions in this API can't be used. For details, see
  503  * @ref apiFilesC_client.
  504  *
  505  * This function is created automatically.
  506  */
  507 //--------------------------------------------------------------------------------------------------
  508 void le_sim_DisconnectService
  509 (
  510     void
  511 );
  512 
  513 
  514 //--------------------------------------------------------------------------------------------------
  515 /**
  516  * Reference type for FPLMN list.
  517  */
  518 //--------------------------------------------------------------------------------------------------
  519 
  520 
  521 //--------------------------------------------------------------------------------------------------
  522 /**
  523  * SIM states.
  524  *
  525  */
  526 //--------------------------------------------------------------------------------------------------
  527 
  528 
  529 //--------------------------------------------------------------------------------------------------
  530 /**
  531  * SIM identifiers.
  532  *
  533  */
  534 //--------------------------------------------------------------------------------------------------
  535 
  536 
  537 //--------------------------------------------------------------------------------------------------
  538 /**
  539  * Card Manufacturer.
  540  *
  541  */
  542 //--------------------------------------------------------------------------------------------------
  543 
  544 
  545 //--------------------------------------------------------------------------------------------------
  546 /**
  547  * SIM commands.
  548  */
  549 //--------------------------------------------------------------------------------------------------
  550 
  551 
  552 //--------------------------------------------------------------------------------------------------
  553 /**
  554  * SIM Toolkit events.
  555  */
  556 //--------------------------------------------------------------------------------------------------
  557 
  558 
  559 //--------------------------------------------------------------------------------------------------
  560 /**
  561  * SIM Toolkit Refresh modes, defined in ETSI TS 102 223 sections 6.4.7 and 8.6.
  562  */
  563 //--------------------------------------------------------------------------------------------------
  564 
  565 
  566 //--------------------------------------------------------------------------------------------------
  567 /**
  568  * SIM Toolkit Refresh stages.
  569  */
  570 //--------------------------------------------------------------------------------------------------
  571 
  572 
  573 //--------------------------------------------------------------------------------------------------
  574 /**
  575  * Handler for sim state changes.
  576  *
  577  */
  578 //--------------------------------------------------------------------------------------------------
  579 
  580 
  581 //--------------------------------------------------------------------------------------------------
  582 /**
  583  * Reference type used by Add/Remove functions for EVENT 'le_sim_NewState'
  584  */
  585 //--------------------------------------------------------------------------------------------------
  586 
  587 
  588 //--------------------------------------------------------------------------------------------------
  589 /**
  590  * Handler for profile update events.
  591  *
  592  */
  593 //--------------------------------------------------------------------------------------------------
  594 
  595 
  596 //--------------------------------------------------------------------------------------------------
  597 /**
  598  * Reference type used by Add/Remove functions for EVENT 'le_sim_ProfileUpdate'
  599  */
  600 //--------------------------------------------------------------------------------------------------
  601 
  602 
  603 //--------------------------------------------------------------------------------------------------
  604 /**
  605  * Handler for Sim Toolkit Events.
  606  *
  607  */
  608 //--------------------------------------------------------------------------------------------------
  609 
  610 
  611 //--------------------------------------------------------------------------------------------------
  612 /**
  613  * Reference type used by Add/Remove functions for EVENT 'le_sim_SimToolkitEvent'
  614  */
  615 //--------------------------------------------------------------------------------------------------
  616 
  617 
  618 //--------------------------------------------------------------------------------------------------
  619 /**
  620  * Handler for ICCID change events.
  621  *
  622  */
  623 //--------------------------------------------------------------------------------------------------
  624 
  625 
  626 //--------------------------------------------------------------------------------------------------
  627 /**
  628  * Reference type used by Add/Remove functions for EVENT 'le_sim_IccidChange'
  629  */
  630 //--------------------------------------------------------------------------------------------------
  631 
  632 
  633 //--------------------------------------------------------------------------------------------------
  634 /**
  635  * Add handler function for EVENT 'le_sim_NewState'
  636  *
  637  * This event provides information on sim state changes.
  638  *
  639  */
  640 //--------------------------------------------------------------------------------------------------
  641 le_sim_NewStateHandlerRef_t le_sim_AddNewStateHandler
  642 (
  643     le_sim_NewStateHandlerFunc_t handlerPtr,
  644         ///< [IN]
  645     void* contextPtr
  646         ///< [IN]
  647 );
  648 
  649 //--------------------------------------------------------------------------------------------------
  650 /**
  651  * Remove handler function for EVENT 'le_sim_NewState'
  652  */
  653 //--------------------------------------------------------------------------------------------------
  654 void le_sim_RemoveNewStateHandler
  655 (
  656     le_sim_NewStateHandlerRef_t handlerRef
  657         ///< [IN]
  658 );
  659 
  660 //--------------------------------------------------------------------------------------------------
  661 /**
  662  * Add handler function for EVENT 'le_sim_ProfileUpdate'
  663  *
  664  * This event provides information on profile update
  665  *
  666  */
  667 //--------------------------------------------------------------------------------------------------
  668 le_sim_ProfileUpdateHandlerRef_t le_sim_AddProfileUpdateHandler
  669 (
  670     le_sim_ProfileUpdateHandlerFunc_t handlerPtr,
  671         ///< [IN]
  672     void* contextPtr
  673         ///< [IN]
  674 );
  675 
  676 //--------------------------------------------------------------------------------------------------
  677 /**
  678  * Remove handler function for EVENT 'le_sim_ProfileUpdate'
  679  */
  680 //--------------------------------------------------------------------------------------------------
  681 void le_sim_RemoveProfileUpdateHandler
  682 (
  683     le_sim_ProfileUpdateHandlerRef_t handlerRef
  684         ///< [IN]
  685 );
  686 
  687 //--------------------------------------------------------------------------------------------------
  688 /**
  689  * Add handler function for EVENT 'le_sim_SimToolkitEvent'
  690  *
  691  * This event provides information on Sim Toolkit application.
  692  *
  693  */
  694 //--------------------------------------------------------------------------------------------------
  695 le_sim_SimToolkitEventHandlerRef_t le_sim_AddSimToolkitEventHandler
  696 (
  697     le_sim_SimToolkitEventHandlerFunc_t handlerPtr,
  698         ///< [IN]
  699     void* contextPtr
  700         ///< [IN]
  701 );
  702 
  703 //--------------------------------------------------------------------------------------------------
  704 /**
  705  * Remove handler function for EVENT 'le_sim_SimToolkitEvent'
  706  */
  707 //--------------------------------------------------------------------------------------------------
  708 void le_sim_RemoveSimToolkitEventHandler
  709 (
  710     le_sim_SimToolkitEventHandlerRef_t handlerRef
  711         ///< [IN]
  712 );
  713 
  714 //--------------------------------------------------------------------------------------------------
  715 /**
  716  * Add handler function for EVENT 'le_sim_IccidChange'
  717  *
  718  * This event provides information on ICCID
  719  *
  720  */
  721 //--------------------------------------------------------------------------------------------------
  722 le_sim_IccidChangeHandlerRef_t le_sim_AddIccidChangeHandler
  723 (
  724     le_sim_IccidChangeHandlerFunc_t handlerPtr,
  725         ///< [IN]
  726     void* contextPtr
  727         ///< [IN]
  728 );
  729 
  730 //--------------------------------------------------------------------------------------------------
  731 /**
  732  * Remove handler function for EVENT 'le_sim_IccidChange'
  733  */
  734 //--------------------------------------------------------------------------------------------------
  735 void le_sim_RemoveIccidChangeHandler
  736 (
  737     le_sim_IccidChangeHandlerRef_t handlerRef
  738         ///< [IN]
  739 );
  740 
  741 //--------------------------------------------------------------------------------------------------
  742 /**
  743  * Get the current selected card.
  744  *
  745  * @return Number of the current selected SIM card.
  746  */
  747 //--------------------------------------------------------------------------------------------------
  748 le_sim_Id_t le_sim_GetSelectedCard
  749 (
  750     void
  751 );
  752 
  753 //--------------------------------------------------------------------------------------------------
  754 /**
  755  * Select a SIM.
  756  *
  757  * @return LE_FAULT         Function failed to select the requested SIM
  758  * @return LE_OK            Function succeeded.
  759  *
  760  */
  761 //--------------------------------------------------------------------------------------------------
  762 le_result_t le_sim_SelectCard
  763 (
  764     le_sim_Id_t simId
  765         ///< [IN] The SIM identifier.
  766 );
  767 
  768 //--------------------------------------------------------------------------------------------------
  769 /**
  770  * Retrieves the integrated circuit card identifier (ICCID) of the SIM card (20 digits)
  771  *
  772  * @return LE_OK             ICCID was successfully retrieved.
  773  * @return LE_OVERFLOW       iccidPtr buffer was too small for the ICCID.
  774  * @return LE_BAD_PARAMETER  Invalid parameters.
  775  * @return LE_FAULT          The ICCID could not be retrieved.
  776  *
  777  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  778  *       function will not return.
  779  */
  780 //--------------------------------------------------------------------------------------------------
  781 le_result_t le_sim_GetICCID
  782 (
  783     le_sim_Id_t simId,
  784         ///< [IN] The SIM identifier.
  785     char* iccid,
  786         ///< [OUT] ICCID
  787     size_t iccidSize
  788         ///< [IN]
  789 );
  790 
  791 //--------------------------------------------------------------------------------------------------
  792 /**
  793  * Retrieves the identifier for the embedded Universal Integrated Circuit Card identifier (EID)
  794  * (32 digits)
  795  *
  796  * @return LE_OK             EID was successfully retrieved.
  797  * @return LE_OVERFLOW       eidPtr buffer was too small for the EID.
  798  * @return LE_BAD_PARAMETER  Invalid parameters.
  799  * @return LE_FAULT          The EID could not be retrieved.
  800  *
  801  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  802  *       function will not return.
  803  *
  804  * @warning le_sim_GetEID() function is platform dependent. Please refer to the
  805  *          @ref platformConstraintsSim_EID section for full details.
  806  */
  807 //--------------------------------------------------------------------------------------------------
  808 le_result_t le_sim_GetEID
  809 (
  810     le_sim_Id_t simId,
  811         ///< [IN] The SIM identifier.
  812     char* eid,
  813         ///< [OUT] EID
  814     size_t eidSize
  815         ///< [IN]
  816 );
  817 
  818 //--------------------------------------------------------------------------------------------------
  819 /**
  820  * Retrieves the identification number (IMSI) of the SIM card. (max 15 digits)
  821  *
  822  * @return LE_OVERFLOW      The imsiPtr buffer was too small for the IMSI.
  823  * @return LE_BAD_PARAMETER The parameters are invalid.
  824  * @return LE_FAULT         The function failed.
  825  * @return LE_TIMEOUT       No response was received.
  826  * @return LE_OK            The function succeeded.
  827  *
  828  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  829  *       function will not return.
  830  */
  831 //--------------------------------------------------------------------------------------------------
  832 le_result_t le_sim_GetIMSI
  833 (
  834     le_sim_Id_t simId,
  835         ///< [IN] The SIM identifier.
  836     char* imsi,
  837         ///< [OUT] IMSI
  838     size_t imsiSize
  839         ///< [IN]
  840 );
  841 
  842 //--------------------------------------------------------------------------------------------------
  843 /**
  844  * Verify if the SIM card is present or not.
  845  *
  846  * @return true   SIM card is present.
  847  * @return false  SIM card is absent
  848  *
  849  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  850  *       function will not return.
  851  */
  852 //--------------------------------------------------------------------------------------------------
  853 bool le_sim_IsPresent
  854 (
  855     le_sim_Id_t simId
  856         ///< [IN] The SIM identifier.
  857 );
  858 
  859 //--------------------------------------------------------------------------------------------------
  860 /**
  861  * Verify if the SIM is ready (PIN code correctly inserted or not
  862  * required).
  863  *
  864  * @return true   PIN is correctly inserted or not required.
  865  * @return false  PIN must be inserted
  866  *
  867  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  868  *       function will not return.
  869  */
  870 //--------------------------------------------------------------------------------------------------
  871 bool le_sim_IsReady
  872 (
  873     le_sim_Id_t simId
  874         ///< [IN] The SIM identifier.
  875 );
  876 
  877 //--------------------------------------------------------------------------------------------------
  878 /**
  879  * This function must be called to enter the PIN code.
  880  *
  881  * @return LE_BAD_PARAMETER The parameters are invalid.
  882  * @return LE_NOT_FOUND     The function failed to select the SIM card for this operation.
  883  * @return LE_UNDERFLOW     The PIN code is not long enough (min 4 digits).
  884  * @return LE_FAULT         The function failed to enter the PIN code.
  885  * @return LE_OK            The function succeeded.
  886  *
  887  * @note If PIN code is too long (max 8 digits), it is a fatal error, the
  888  *       function will not return.
  889  *
  890  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  891  *       function will not return.
  892  */
  893 //--------------------------------------------------------------------------------------------------
  894 le_result_t le_sim_EnterPIN
  895 (
  896     le_sim_Id_t simId,
  897         ///< [IN] The SIM identifier.
  898     const char* LE_NONNULL pin
  899         ///< [IN] The PIN code.
  900 );
  901 
  902 //--------------------------------------------------------------------------------------------------
  903 /**
  904  * Change the PIN code.
  905  *
  906  * @return LE_NOT_FOUND     Function failed to select the SIM card for this operation.
  907  * @return LE_UNDERFLOW     PIN code is/are not long enough (min 4 digits).
  908  * @return LE_FAULT         Function failed to change the PIN code.
  909  * @return LE_OK            Function succeeded.
  910  *
  911  * @note If PIN code is too long (max 8 digits), it is a fatal error, the
  912  *       function will not return.
  913  *
  914  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  915  *       function will not return.
  916  */
  917 //--------------------------------------------------------------------------------------------------
  918 le_result_t le_sim_ChangePIN
  919 (
  920     le_sim_Id_t simId,
  921         ///< [IN] The SIM identifier.
  922     const char* LE_NONNULL oldpin,
  923         ///< [IN] The old PIN code.
  924     const char* LE_NONNULL newpin
  925         ///< [IN] The new PIN code.
  926 );
  927 
  928 //--------------------------------------------------------------------------------------------------
  929 /**
  930  * Get the number of remaining PIN insertion tries.
  931  *
  932  * @return LE_NOT_FOUND     The function failed to select the SIM card for this operation.
  933  * @return LE_BAD_PARAMETER Invalid SIM identifier.
  934  * @return LE_FAULT         The function failed to get the number of remaining PIN insertion tries.
  935  * @return A positive value The function succeeded. The number of remaining PIN insertion tries.
  936  *
  937  */
  938 //--------------------------------------------------------------------------------------------------
  939 int32_t le_sim_GetRemainingPINTries
  940 (
  941     le_sim_Id_t simId
  942         ///< [IN] The SIM identifier.
  943 );
  944 
  945 //--------------------------------------------------------------------------------------------------
  946 /**
  947  * Get the number of remaining PUK insertion tries.
  948  *
  949  * @return LE_OK            On success.
  950  * @return LE_NOT_FOUND     The function failed to select the SIM card for this operation.
  951  * @return LE_BAD_PARAMETER Invalid SIM identifier.
  952  * @return LE_FAULT         The function failed to get the number of remaining PUK insertion tries.
  953  *
  954  * @note If the caller is passing an null pointer to this function, it is a fatal error
  955  *       and the function will not return.
  956  *
  957  */
  958 //--------------------------------------------------------------------------------------------------
  959 le_result_t le_sim_GetRemainingPUKTries
  960 (
  961     le_sim_Id_t simId,
  962         ///< [IN] The SIM identifier.
  963     uint32_t* remainingPukTriesPtrPtr
  964         ///< [OUT] The number of remaining PUK insertion tries.
  965 );
  966 
  967 //--------------------------------------------------------------------------------------------------
  968 /**
  969  * Unlock the SIM card: it disables the request of the PIN code.
  970  *
  971  * @return LE_NOT_FOUND     Function failed to select the SIM card for this operation.
  972  * @return LE_UNDERFLOW     PIN code is not long enough (min 4 digits).
  973  * @return LE_FAULT         The function failed to unlock the SIM card.
  974  * @return LE_OK            Function succeeded.
  975  *
  976  * @note If PIN code is too long (max 8 digits), it is a fatal error, the
  977  *       function will not return.
  978  *
  979  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
  980  *       function will not return.
  981  */
  982 //--------------------------------------------------------------------------------------------------
  983 le_result_t le_sim_Unlock
  984 (
  985     le_sim_Id_t simId,
  986         ///< [IN] The SIM identifier.
  987     const char* LE_NONNULL pin
  988         ///< [IN] The PIN code.
  989 );
  990 
  991 //--------------------------------------------------------------------------------------------------
  992 /**
  993  * Lock the SIM card: it enables the request of the PIN code.
  994  *
  995  * @return LE_NOT_FOUND     Function failed to select the SIM card for this operation.
  996  * @return LE_UNDERFLOW     PIN code is not long enough (min 4 digits).
  997  * @return LE_FAULT         The function failed to unlock the SIM card.
  998  * @return LE_OK            Function succeeded.
  999  *
 1000  * @note If PIN code is too long (max 8 digits), it is a fatal error, the
 1001  *       function will not return.
 1002  *
 1003  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
 1004  *       function will not return.
 1005  */
 1006 //--------------------------------------------------------------------------------------------------
 1007 le_result_t le_sim_Lock
 1008 (
 1009     le_sim_Id_t simId,
 1010         ///< [IN] The SIM identifier.
 1011     const char* LE_NONNULL pin
 1012         ///< [IN] The PIN code.
 1013 );
 1014 
 1015 //--------------------------------------------------------------------------------------------------
 1016 /**
 1017  * Unblock the SIM card.
 1018  *
 1019  * @return LE_NOT_FOUND     Function failed to select the SIM card for this operation.
 1020  * @return LE_UNDERFLOW     PIN code is not long enough (min 4 digits).
 1021  * @return LE_BAD_PARAMETER Invalid SIM identifier.
 1022  * @return LE_OUT_OF_RANGE  PUK code length is not correct (8 digits).
 1023  * @return LE_FAULT         The function failed to unlock the SIM card.
 1024  * @return LE_OK            Function succeeded.
 1025  *
 1026  * @note If new PIN or puk code are too long (max 8 digits), it is a fatal error, the
 1027  *       function will not return.
 1028  *
 1029  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
 1030  *       function will not return.
 1031  */
 1032 //--------------------------------------------------------------------------------------------------
 1033 le_result_t le_sim_Unblock
 1034 (
 1035     le_sim_Id_t simId,
 1036         ///< [IN] The SIM identifier.
 1037     const char* LE_NONNULL puk,
 1038         ///< [IN] The PUK code.
 1039     const char* LE_NONNULL newpin
 1040         ///< [IN] The PIN code.
 1041 );
 1042 
 1043 //--------------------------------------------------------------------------------------------------
 1044 /**
 1045  * Get the SIM state.
 1046  *
 1047  * @return Current SIM state.
 1048  *
 1049  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
 1050  *       function will not return.
 1051  */
 1052 //--------------------------------------------------------------------------------------------------
 1053 le_sim_States_t le_sim_GetState
 1054 (
 1055     le_sim_Id_t simId
 1056         ///< [IN] The SIM identifier.
 1057 );
 1058 
 1059 //--------------------------------------------------------------------------------------------------
 1060 /**
 1061  * Get the SIM Phone Number.
 1062  *
 1063  * @return
 1064  *      - LE_OK on success
 1065  *      - LE_OVERFLOW if the Phone Number can't fit in phoneNumberStr
 1066  *      - LE_BAD_PARAMETER if a parameter is invalid
 1067  *      - LE_FAULT on any other failure
 1068  *
 1069  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
 1070  *       function will not return.
 1071  */
 1072 //--------------------------------------------------------------------------------------------------
 1073 le_result_t le_sim_GetSubscriberPhoneNumber
 1074 (
 1075     le_sim_Id_t simId,
 1076         ///< [IN] The SIM identifier.
 1077     char* phoneNumberStr,
 1078         ///< [OUT] The phone Number.
 1079     size_t phoneNumberStrSize
 1080         ///< [IN]
 1081 );
 1082 
 1083 //--------------------------------------------------------------------------------------------------
 1084 /**
 1085  * This function must be called to get the Home Network Name information.
 1086  *
 1087  * @return
 1088  *      - LE_OK on success
 1089  *      - LE_OVERFLOW if the Home Network Name can't fit in nameStr
 1090  *      - LE_BAD_PARAMETER if a parameter is invalid
 1091  *      - LE_FAULT on any other failure
 1092  *
 1093  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
 1094  *       function will not return.
 1095  *
 1096  * @note The home network name can be given even if the device is not registered on the network.
 1097  */
 1098 //--------------------------------------------------------------------------------------------------
 1099 le_result_t le_sim_GetHomeNetworkOperator
 1100 (
 1101     le_sim_Id_t simId,
 1102         ///< [IN] The SIM identifier.
 1103     char* nameStr,
 1104         ///< [OUT] the home network Name
 1105     size_t nameStrSize
 1106         ///< [IN]
 1107 );
 1108 
 1109 //--------------------------------------------------------------------------------------------------
 1110 /**
 1111  * This function must be called to get the Home Network MCC MNC.
 1112  *
 1113  * @return
 1114  *      - LE_OK on success
 1115  *      - LE_NOT_FOUND if Home Network has not been provisioned
 1116  *      - LE_FAULT for unexpected error
 1117  *
 1118  * @note If the caller is passing a bad pointer into this function, it is a fatal error, the
 1119  *       function will not return.
 1120  */
 1121 //--------------------------------------------------------------------------------------------------
 1122 le_result_t le_sim_GetHomeNetworkMccMnc
 1123 (
 1124     le_sim_Id_t simId,
 1125         ///< [IN] The SIM identifier.
 1126     char* mccPtr,
 1127         ///< [OUT] Mobile Country Code
 1128     size_t mccPtrSize,
 1129         ///< [IN]
 1130     char* mncPtr,
 1131         ///< [OUT] Mobile Network Code
 1132     size_t mncPtrSize
 1133         ///< [IN]
 1134 );
 1135 
 1136 //--------------------------------------------------------------------------------------------------
 1137 /**
 1138  * This function must be called to request the multi-profile eUICC to swap to ECS and to refresh.
 1139  * The User's application must wait for eUICC reboot to be finished and network connection
 1140  * available.
 1141  *
 1142  * @return
 1143  *      - LE_OK on success
 1144  *      - LE_BAD_PARAMETER invalid SIM identifier
 1145  *      - LE_BUSY when a profile swap is already in progress
 1146  *      - LE_FAULT for unexpected error
 1147  *      - LE_DUPLICATE for duplicate operation
 1148  *
 1149  * @note Please ensure that the eUICC is selected using le_sim_SelectCard() and in a ready state
 1150  *       before attempting a profile swap.
 1151  *
 1152  * @warning If you use a Morpho or Oberthur card, the SIM_REFRESH PRO-ACTIVE command must be
 1153  *          accepted with le_sim_AcceptSimToolkitCommand() in order to complete the profile swap
 1154  *          procedure.
 1155  */
 1156 //--------------------------------------------------------------------------------------------------
 1157 le_result_t le_sim_LocalSwapToEmergencyCallSubscription
 1158 (
 1159     le_sim_Id_t simId,
 1160         ///< [IN] The SIM identifier.
 1161     le_sim_Manufacturer_t manufacturer
 1162         ///< [IN] The card manufacturer.
 1163 );
 1164 
 1165 //--------------------------------------------------------------------------------------------------
 1166 /**
 1167  * This function must be called to request the multi-profile eUICC to swap back to commercial
 1168  * subscription and to refresh.
 1169  * The User's application must wait for eUICC reboot to be finished and network connection
 1170  * available.
 1171  *
 1172  * @return
 1173  *      - LE_OK on success
 1174  *      - LE_BAD_PARAMETER invalid SIM identifier
 1175  *      - LE_BUSY when a profile swap is already in progress
 1176  *      - LE_FAULT for unexpected error
 1177  *      - LE_DUPLICATE for duplicate operation
 1178  *
 1179  * @note Please ensure that the eUICC is selected using le_sim_SelectCard() and in a ready state
 1180  *       before attempting a profile swap.
 1181  *
 1182  * @warning If you use a Morpho or Oberthur card, the SIM_REFRESH PRO-ACTIVE command must be
 1183  *          accepted with le_sim_AcceptSimToolkitCommand() in order to complete the profile swap
 1184  *          procedure.
 1185  */
 1186 //--------------------------------------------------------------------------------------------------
 1187 le_result_t le_sim_LocalSwapToCommercialSubscription
 1188 (
 1189     le_sim_Id_t simId,
 1190         ///< [IN] The SIM identifier.
 1191     le_sim_Manufacturer_t manufacturer
 1192         ///< [IN] The card manufacturer.
 1193 );
 1194 
 1195 //--------------------------------------------------------------------------------------------------
 1196 /**
 1197  * This function must be called to get the current subscription.
 1198  *
 1199  * @return
 1200  *      - LE_OK on success
 1201  *      - LE_BAD_PARAMETER invalid SIM identifier or null ECS pointer is passed
 1202  *      - LE_NOT_FOUND cannot determine the current selected subscription
 1203  *      - LE_FAULT for unexpected errors
 1204  *
 1205  * @warning There is no standard method to interrogate the current selected subscription. The
 1206  * returned value of this function is based on the last executed local swap command. This means
 1207  * that this function will always return LE_NOT_FOUND error at Legato startup.
 1208  */
 1209 //--------------------------------------------------------------------------------------------------
 1210 le_result_t le_sim_IsEmergencyCallSubscriptionSelected
 1211 (
 1212     le_sim_Id_t simId,
 1213         ///< [IN] The SIM identifier
 1214     bool* isEcsPtr
 1215         ///< [OUT] true if Emergency Call Subscription (ECS) is selected,
 1216         ///<       false if Commercial Subscription is selected
 1217 );
 1218 
 1219 //--------------------------------------------------------------------------------------------------
 1220 /**
 1221  * Accept the last SIM Toolkit command.
 1222  *
 1223  * @return
 1224  *  - LE_OK       The function succeeded.
 1225  *  - LE_FAULT    The function failed.
 1226  */
 1227 //--------------------------------------------------------------------------------------------------
 1228 le_result_t le_sim_AcceptSimToolkitCommand
 1229 (
 1230     le_sim_Id_t simId
 1231         ///< [IN] The SIM identifier.
 1232 );
 1233 
 1234 //--------------------------------------------------------------------------------------------------
 1235 /**
 1236  * Reject the last SIM Toolkit command.
 1237  *
 1238  * @return
 1239  *  - LE_OK       The function succeeded.
 1240  *  - LE_FAULT    The function failed.
 1241  */
 1242 //--------------------------------------------------------------------------------------------------
 1243 le_result_t le_sim_RejectSimToolkitCommand
 1244 (
 1245     le_sim_Id_t simId
 1246         ///< [IN] The SIM identifier.
 1247 );
 1248 
 1249 //--------------------------------------------------------------------------------------------------
 1250 /**
 1251  * Retrieve the mode of the last SIM Toolkit Refresh command.
 1252  * The modes are defined in ETSI TS 102 223 sections 6.4.7 and 8.6.
 1253  *
 1254  * @return
 1255  *  - LE_OK             The function succeeded.
 1256  *  - LE_BAD_PARAMETER  A parameter is invalid.
 1257  *  - LE_UNAVAILABLE    The last SIM Toolkit command is not a Refresh command.
 1258  *  - LE_FAULT          The function failed.
 1259  *  - LE_UNSUPPORTED    The platform does not support this operation.
 1260  */
 1261 //--------------------------------------------------------------------------------------------------
 1262 le_result_t le_sim_GetSimToolkitRefreshMode
 1263 (
 1264     le_sim_Id_t simId,
 1265         ///< [IN] The SIM identifier.
 1266     le_sim_StkRefreshMode_t* refreshModePtr
 1267         ///< [OUT] The Refresh mode.
 1268 );
 1269 
 1270 //--------------------------------------------------------------------------------------------------
 1271 /**
 1272  * Retrieve the stage of the last SIM Toolkit Refresh command.
 1273  *
 1274  * @return
 1275  *  - LE_OK             The function succeeded.
 1276  *  - LE_BAD_PARAMETER  A parameter is invalid.
 1277  *  - LE_UNAVAILABLE    The last SIM Toolkit command is not a Refresh command.
 1278  *  - LE_FAULT          The function failed.
 1279  */
 1280 //--------------------------------------------------------------------------------------------------
 1281 le_result_t le_sim_GetSimToolkitRefreshStage
 1282 (
 1283     le_sim_Id_t simId,
 1284         ///< [IN] The SIM identifier.
 1285     le_sim_StkRefreshStage_t* refreshStagePtr
 1286         ///< [OUT] The Refresh stage.
 1287 );
 1288 
 1289 //--------------------------------------------------------------------------------------------------
 1290 /**
 1291  * Send APDU command to the SIM.
 1292  *
 1293  * @return
 1294  *      - LE_OK             Function succeeded.
 1295  *      - LE_FAULT          The function failed.
 1296  *      - LE_BAD_PARAMETER  A parameter is invalid.
 1297  *      - LE_NOT_FOUND      The function failed to select the SIM card for this operation.
 1298  */
 1299 //--------------------------------------------------------------------------------------------------
 1300 le_result_t le_sim_SendApdu
 1301 (
 1302     le_sim_Id_t simId,
 1303         ///< [IN] The SIM identifier.
 1304     const uint8_t* commandApduPtr,
 1305         ///< [IN] APDU command.
 1306     size_t commandApduSize,
 1307         ///< [IN]
 1308     uint8_t* responseApduPtr,
 1309         ///< [OUT] SIM response.
 1310     size_t* responseApduSizePtr
 1311         ///< [INOUT]
 1312 );
 1313 
 1314 //--------------------------------------------------------------------------------------------------
 1315 /**
 1316  * Send a command to the SIM.
 1317  *
 1318  * @return
 1319  *      - LE_OK             Function succeeded.
 1320  *      - LE_FAULT          The function failed.
 1321  *      - LE_BAD_PARAMETER  A parameter is invalid.
 1322  *      - LE_NOT_FOUND      - The function failed to select the SIM card for this operation
 1323  *                          - The requested SIM file is not found
 1324  *      - LE_OVERFLOW       Response buffer is too small to copy the SIM answer.
 1325  *      - LE_UNSUPPORTED    The platform does not support this operation.
 1326  */
 1327 //--------------------------------------------------------------------------------------------------
 1328 le_result_t le_sim_SendCommand
 1329 (
 1330     le_sim_Id_t simId,
 1331         ///< [IN] The SIM identifier.
 1332     le_sim_Command_t command,
 1333         ///< [IN] The SIM command.
 1334     const char* LE_NONNULL fileIdentifier,
 1335         ///< [IN] File identifier
 1336     uint8_t p1,
 1337         ///< [IN] Parameter P1 passed to the SIM
 1338     uint8_t p2,
 1339         ///< [IN] Parameter P2 passed to the SIM
 1340     uint8_t p3,
 1341         ///< [IN] Parameter P3 passed to the SIM
 1342     const uint8_t* dataPtr,
 1343         ///< [IN] data command.
 1344     size_t dataSize,
 1345         ///< [IN]
 1346     const char* LE_NONNULL path,
 1347         ///< [IN] path of the elementary file
 1348     uint8_t* sw1Ptr,
 1349         ///< [OUT] Status Word 1 received from the SIM
 1350     uint8_t* sw2Ptr,
 1351         ///< [OUT] Status Word 2 received from the SIM
 1352     uint8_t* responsePtr,
 1353         ///< [OUT] SIM response.
 1354     size_t* responseSizePtr
 1355         ///< [INOUT]
 1356 );
 1357 
 1358 //--------------------------------------------------------------------------------------------------
 1359 /**
 1360  * Enable or disable the automatic SIM selection
 1361  *
 1362  * @note Automatic SIM selection uses the following rule: If an external SIM is inserted in
 1363  *       slot 1 then select it. Otherwise, fall back to the internal SIM card.
 1364  *
 1365  * @return
 1366  *      - LE_OK            Function succeeded.
 1367  *      - LE_FAULT         Function failed to execute.
 1368  *
 1369  */
 1370 //--------------------------------------------------------------------------------------------------
 1371 le_result_t le_sim_SetAutomaticSelection
 1372 (
 1373     bool enable
 1374         ///< [IN] True if the feature needs to be enabled. False otherwise.
 1375 );
 1376 
 1377 //--------------------------------------------------------------------------------------------------
 1378 /**
 1379  * Get the automatic SIM selection
 1380  *
 1381  * @note When enabled, automatic SIM selection uses the following rule: If an external SIM is
 1382  *       inserted in slot 1 then select it. Otherwise, fall back to the internal SIM card.
 1383  *
 1384  * @return
 1385  *      - LE_OK             Function succeeded.
 1386  *      - LE_FAULT          Function failed to execute.
 1387  *      - LE_BAD_PARAMETER  Invalid parameter.
 1388  *      - LE_UNSUPPORTED    The platform does not support this operation.
 1389  *
 1390  */
 1391 //--------------------------------------------------------------------------------------------------
 1392 le_result_t le_sim_GetAutomaticSelection
 1393 (
 1394     bool* enablePtr
 1395         ///< [OUT] True if the feature is enabled. False otherwise.
 1396 );
 1397 
 1398 //--------------------------------------------------------------------------------------------------
 1399 /**
 1400  * Reset the SIM.
 1401  *
 1402  * @return
 1403  *      - LE_FAULT         Function failed.
 1404  *      - LE_OK            Function succeeded.
 1405  */
 1406 //--------------------------------------------------------------------------------------------------
 1407 le_result_t le_sim_Reset
 1408 (
 1409     le_sim_Id_t simId
 1410         ///< [IN] The SIM identifier.
 1411 );
 1412 
 1413 //--------------------------------------------------------------------------------------------------
 1414 /**
 1415  * Create empty FPLMN list to insert FPLMN operators.
 1416  *
 1417  * @return
 1418  *      - Reference to the List object.
 1419  *      - Null pointer if not able to create list reference.
 1420  */
 1421 //--------------------------------------------------------------------------------------------------
 1422 le_sim_FPLMNListRef_t le_sim_CreateFPLMNList
 1423 (
 1424     void
 1425 );
 1426 
 1427 //--------------------------------------------------------------------------------------------------
 1428 /**
 1429  * Add FPLMN network into the newly created FPLMN list.
 1430  * If the FPLMNListRef, mcc or mnc is not valid then this function will kill the calling client.
 1431  *
 1432  * @return
 1433  *      - LE_FAULT         Function failed.
 1434  *      - LE_OK            Function succeeded.
 1435  *      - LE_OVERFLOW      If FPLMN operator can not be inserted into FPLMN list.
 1436  */
 1437 //--------------------------------------------------------------------------------------------------
 1438 le_result_t le_sim_AddFPLMNOperator
 1439 (
 1440     le_sim_FPLMNListRef_t FPLMNListRef,
 1441         ///< [IN] FPLMN list reference.
 1442     const char* LE_NONNULL mcc,
 1443         ///< [IN] Mobile Country Code.
 1444     const char* LE_NONNULL mnc
 1445         ///< [IN] Mobile Network Code.
 1446 );
 1447 
 1448 //--------------------------------------------------------------------------------------------------
 1449 /**
 1450  * Write FPLMN list into the SIM.
 1451  * If the FPLMNListRef is not valid then this function will kill the calling client.
 1452  *
 1453  * @return
 1454  *      - LE_FAULT         Function failed.
 1455  *      - LE_OK            Function succeeded.
 1456  *
 1457  */
 1458 //--------------------------------------------------------------------------------------------------
 1459 le_result_t le_sim_WriteFPLMNList
 1460 (
 1461     le_sim_Id_t simId,
 1462         ///< [IN] The SIM identifier.
 1463     le_sim_FPLMNListRef_t FPLMNListRef
 1464         ///< [IN] FPLMN list reference.
 1465 );
 1466 
 1467 //--------------------------------------------------------------------------------------------------
 1468 /**
 1469  * Read FPLMN list from the SIM.
 1470  *
 1471  * @return
 1472  *      - Reference to the List object.
 1473  *      - Null pointer if FPLMN list is not able to read from the SIM.
 1474  */
 1475 //--------------------------------------------------------------------------------------------------
 1476 le_sim_FPLMNListRef_t le_sim_ReadFPLMNList
 1477 (
 1478     le_sim_Id_t simId
 1479         ///< [IN] The SIM identifier.
 1480 );
 1481 
 1482 //--------------------------------------------------------------------------------------------------
 1483 /**
 1484  * Read the first FPLMN network from the list of FPLMN objects retrieved with
 1485  * le_sim_ReadFPLMNList().
 1486  * If the FPLMNListRef, mccPtr or mncPtr is not valid then this function will kill the calling
 1487  * client.
 1488  *
 1489  * @return
 1490  *      - LE_FAULT         Function failed.
 1491  *      - LE_OK            Function succeeded.
 1492  *      - LE_OVERFLOW      MCC/MNC string size is greater than string length parameter which has
 1493  *                         been given into this function.
 1494  */
 1495 //--------------------------------------------------------------------------------------------------
 1496 le_result_t le_sim_GetFirstFPLMNOperator
 1497 (
 1498     le_sim_FPLMNListRef_t FPLMNListRef,
 1499         ///< [IN] FPLMN list reference.
 1500     char* mccPtr,
 1501         ///< [OUT] Mobile Country Code.
 1502     size_t mccPtrSize,
 1503         ///< [IN]
 1504     char* mncPtr,
 1505         ///< [OUT] Mobile Network Code.
 1506     size_t mncPtrSize
 1507         ///< [IN]
 1508 );
 1509 
 1510 //--------------------------------------------------------------------------------------------------
 1511 /**
 1512  * Read the next FPLMN network from the list of FPLMN objects retrieved with le_sim_ReadFPLMNList().
 1513  * If the FPLMNListRef, mccPtr or mncPtr is not valid then this function will kill the calling
 1514  * client.
 1515  *
 1516  * @return
 1517  *      - LE_FAULT         Function failed.
 1518  *      - LE_OK            Function succeeded.
 1519  *      - LE_OVERFLOW      MCC/MNC string size is greater than string length parameter which has
 1520  *                         been given into this function.
 1521  */
 1522 //--------------------------------------------------------------------------------------------------
 1523 le_result_t le_sim_GetNextFPLMNOperator
 1524 (
 1525     le_sim_FPLMNListRef_t FPLMNListRef,
 1526         ///< [IN] FPLMN list reference.
 1527     char* mccPtr,
 1528         ///< [OUT] Mobile Country Code.
 1529     size_t mccPtrSize,
 1530         ///< [IN]
 1531     char* mncPtr,
 1532         ///< [OUT] Mobile Network Code.
 1533     size_t mncPtrSize
 1534         ///< [IN]
 1535 );
 1536 
 1537 //--------------------------------------------------------------------------------------------------
 1538 /**
 1539  * Delete the FPLMN list created by le_sim_ReadFPLMNList() or le_sim_CreateFPLMNList().
 1540  * If the FPLMNListRef is not valid then this function will kill the calling client.
 1541  *
 1542  * @note
 1543  *      On failure, the process exits, so you don't have to worry about checking the returned
 1544  *      reference for validity.
 1545  */
 1546 //--------------------------------------------------------------------------------------------------
 1547 void le_sim_DeleteFPLMNList
 1548 (
 1549     le_sim_FPLMNListRef_t FPLMNListRef
 1550         ///< [IN] FPLMN list reference.
 1551 );
 1552 
 1553 //--------------------------------------------------------------------------------------------------
 1554 /**
 1555  * Open a logical channel on the SIM card.
 1556  *
 1557  * @return
 1558  *      - LE_OK            Function succeeded.
 1559  *      - LE_BAD_PARAMETER Invalid parameter.
 1560  *      - LE_FAULT         Function failed.
 1561  */
 1562 //--------------------------------------------------------------------------------------------------
 1563 le_result_t le_sim_OpenLogicalChannel
 1564 (
 1565     uint8_t* channelPtrPtr
 1566         ///< [OUT] The number of the opened logical channel.
 1567 );
 1568 
 1569 //--------------------------------------------------------------------------------------------------
 1570 /**
 1571  * Close a logical channel on the SIM card.
 1572  *
 1573  * @return
 1574  *      - LE_OK            Function succeeded.
 1575  *      - LE_FAULT         Function failed.
 1576  */
 1577 //--------------------------------------------------------------------------------------------------
 1578 le_result_t le_sim_CloseLogicalChannel
 1579 (
 1580     uint8_t channel
 1581         ///< [IN] The number of the logical channel to close.
 1582 );
 1583 
 1584 //--------------------------------------------------------------------------------------------------
 1585 /**
 1586  * Send APDU command on a dedicated logical channel.
 1587  *
 1588  * @return
 1589  *      - LE_OK             Function succeeded.
 1590  *      - LE_BAD_PARAMETER  A parameter is invalid.
 1591  *      - LE_NOT_FOUND      The function failed to select the SIM card for this operation.
 1592  *      - LE_FAULT          The function failed.
 1593  */
 1594 //--------------------------------------------------------------------------------------------------
 1595 le_result_t le_sim_SendApduOnChannel
 1596 (
 1597     le_sim_Id_t simId,
 1598         ///< [IN] The SIM identifier.
 1599     uint8_t channel,
 1600         ///< [IN] The logical channel number.
 1601     const uint8_t* commandApduPtr,
 1602         ///< [IN] APDU command.
 1603     size_t commandApduSize,
 1604         ///< [IN]
 1605     uint8_t* responseApduPtr,
 1606         ///< [OUT] SIM response.
 1607     size_t* responseApduSizePtr
 1608         ///< [INOUT]
 1609 );
 1610 
 1611 //--------------------------------------------------------------------------------------------------
 1612 /**
 1613  * Power up or down the current SIM.
 1614  *
 1615  * @return LE_OK        Function succeeded.
 1616  * @return LE_FAULT     Function failed.
 1617  *
 1618  * @note For SIM power cycle operation, it must wait until SIM state is LE_SIM_POWER_DOWN
 1619  *       before powering on the SIM, otherwise power up SIM will fail.
 1620  */
 1621 //--------------------------------------------------------------------------------------------------
 1622 le_result_t le_sim_SetPower
 1623 (
 1624     le_sim_Id_t simId,
 1625         ///< [IN] The SIM identifier.
 1626     le_onoff_t power
 1627         ///< [IN] The power state.
 1628 );
 1629 
 1630 #endif // LE_SIM_INTERFACE_H_INCLUDE_GUARD
le_sim_AddNewStateHandler
le_sim_NewStateHandlerRef_t le_sim_AddNewStateHandler(le_sim_NewStateHandlerFunc_t handlerPtr, void *contextPtr)


le_mdmDefs_interface.h


le_sim_IsPresent
bool le_sim_IsPresent(le_sim_Id_t simId)


le_sim_GetHomeNetworkOperator
le_result_t le_sim_GetHomeNetworkOperator(le_sim_Id_t simId, char *nameStr, size_t nameStrSize)


le_sim_GetRemainingPUKTries
le_result_t le_sim_GetRemainingPUKTries(le_sim_Id_t simId, uint32_t *remainingPukTriesPtrPtr)


le_result_t
le_result_t
Definition: le_basics.h:35


le_sim_LocalSwapToEmergencyCallSubscription
le_result_t le_sim_LocalSwapToEmergencyCallSubscription(le_sim_Id_t simId, le_sim_Manufacturer_t manufacturer)


le_sim_SetServerDisconnectHandler
LE_FULL_API void le_sim_SetServerDisconnectHandler(le_sim_DisconnectHandler_t disconnectHandler, void *contextPtr)


le_sim_ChangePIN
le_result_t le_sim_ChangePIN(le_sim_Id_t simId, const char *LE_NONNULL oldpin, const char *LE_NONNULL newpin)


le_sim_SendApdu
le_result_t le_sim_SendApdu(le_sim_Id_t simId, const uint8_t *commandApduPtr, size_t commandApduSize, uint8_t *responseApduPtr, size_t *responseApduSizePtr)


le_sim_RemoveProfileUpdateHandler
void le_sim_RemoveProfileUpdateHandler(le_sim_ProfileUpdateHandlerRef_t handlerRef)


le_sim_GetHomeNetworkMccMnc
le_result_t le_sim_GetHomeNetworkMccMnc(le_sim_Id_t simId, char *mccPtr, size_t mccPtrSize, char *mncPtr, size_t mncPtrSize)


le_sim_GetFirstFPLMNOperator
le_result_t le_sim_GetFirstFPLMNOperator(le_sim_FPLMNListRef_t FPLMNListRef, char *mccPtr, size_t mccPtrSize, char *mncPtr, size_t mncPtrSize)


le_sim_OpenLogicalChannel
le_result_t le_sim_OpenLogicalChannel(uint8_t *channelPtrPtr)


le_sim_GetSimToolkitRefreshMode
le_result_t le_sim_GetSimToolkitRefreshMode(le_sim_Id_t simId, le_sim_StkRefreshMode_t *refreshModePtr)


le_sim_AddProfileUpdateHandler
le_sim_ProfileUpdateHandlerRef_t le_sim_AddProfileUpdateHandler(le_sim_ProfileUpdateHandlerFunc_t handlerPtr, void *contextPtr)


le_sim_GetICCID
le_result_t le_sim_GetICCID(le_sim_Id_t simId, char *iccid, size_t iccidSize)


le_sim_GetNextFPLMNOperator
le_result_t le_sim_GetNextFPLMNOperator(le_sim_FPLMNListRef_t FPLMNListRef, char *mccPtr, size_t mccPtrSize, char *mncPtr, size_t mncPtrSize)


le_sim_AcceptSimToolkitCommand
le_result_t le_sim_AcceptSimToolkitCommand(le_sim_Id_t simId)


le_sim_SendApduOnChannel
le_result_t le_sim_SendApduOnChannel(le_sim_Id_t simId, uint8_t channel, const uint8_t *commandApduPtr, size_t commandApduSize, uint8_t *responseApduPtr, size_t *responseApduSizePtr)


le_sim_ReadFPLMNList
le_sim_FPLMNListRef_t le_sim_ReadFPLMNList(le_sim_Id_t simId)


le_sim_ConnectService
void le_sim_ConnectService(void)


le_sim_GetIMSI
le_result_t le_sim_GetIMSI(le_sim_Id_t simId, char *imsi, size_t imsiSize)


le_sim_SetAutomaticSelection
le_result_t le_sim_SetAutomaticSelection(bool enable)


le_sim_CloseLogicalChannel
le_result_t le_sim_CloseLogicalChannel(uint8_t channel)


le_sim_AddIccidChangeHandler
le_sim_IccidChangeHandlerRef_t le_sim_AddIccidChangeHandler(le_sim_IccidChangeHandlerFunc_t handlerPtr, void *contextPtr)


le_sim_DisconnectService
void le_sim_DisconnectService(void)


LE_FULL_API
#define LE_FULL_API
Definition: le_apiFeatures.h:40


le_sim_DeleteFPLMNList
void le_sim_DeleteFPLMNList(le_sim_FPLMNListRef_t FPLMNListRef)


le_sim_Reset
le_result_t le_sim_Reset(le_sim_Id_t simId)


le_sim_SendCommand
le_result_t le_sim_SendCommand(le_sim_Id_t simId, le_sim_Command_t command, const char *LE_NONNULL fileIdentifier, uint8_t p1, uint8_t p2, uint8_t p3, const uint8_t *dataPtr, size_t dataSize, const char *LE_NONNULL path, uint8_t *sw1Ptr, uint8_t *sw2Ptr, uint8_t *responsePtr, size_t *responseSizePtr)


le_sim_WriteFPLMNList
le_result_t le_sim_WriteFPLMNList(le_sim_Id_t simId, le_sim_FPLMNListRef_t FPLMNListRef)


le_sim_AddFPLMNOperator
le_result_t le_sim_AddFPLMNOperator(le_sim_FPLMNListRef_t FPLMNListRef, const char *LE_NONNULL mcc, const char *LE_NONNULL mnc)


le_sim_SelectCard
le_result_t le_sim_SelectCard(le_sim_Id_t simId)


le_sim_GetEID
le_result_t le_sim_GetEID(le_sim_Id_t simId, char *eid, size_t eidSize)


le_sim_DisconnectHandler_t
void(* le_sim_DisconnectHandler_t)(void *)
Definition: le_sim_interface.h:437


le_sim_GetSimToolkitRefreshStage
le_result_t le_sim_GetSimToolkitRefreshStage(le_sim_Id_t simId, le_sim_StkRefreshStage_t *refreshStagePtr)


le_sim_GetAutomaticSelection
le_result_t le_sim_GetAutomaticSelection(bool *enablePtr)


le_sim_GetRemainingPINTries
int32_t le_sim_GetRemainingPINTries(le_sim_Id_t simId)


le_sim_CreateFPLMNList
le_sim_FPLMNListRef_t le_sim_CreateFPLMNList(void)


le_sim_IsReady
bool le_sim_IsReady(le_sim_Id_t simId)


le_sim_AddSimToolkitEventHandler
le_sim_SimToolkitEventHandlerRef_t le_sim_AddSimToolkitEventHandler(le_sim_SimToolkitEventHandlerFunc_t handlerPtr, void *contextPtr)


le_sim_RemoveSimToolkitEventHandler
void le_sim_RemoveSimToolkitEventHandler(le_sim_SimToolkitEventHandlerRef_t handlerRef)


le_sim_RemoveNewStateHandler
void le_sim_RemoveNewStateHandler(le_sim_NewStateHandlerRef_t handlerRef)


le_sim_RejectSimToolkitCommand
le_result_t le_sim_RejectSimToolkitCommand(le_sim_Id_t simId)


le_sim_SetPower
le_result_t le_sim_SetPower(le_sim_Id_t simId, le_onoff_t power)


le_sim_GetSubscriberPhoneNumber
le_result_t le_sim_GetSubscriberPhoneNumber(le_sim_Id_t simId, char *phoneNumberStr, size_t phoneNumberStrSize)


le_sim_RemoveIccidChangeHandler
void le_sim_RemoveIccidChangeHandler(le_sim_IccidChangeHandlerRef_t handlerRef)


le_sim_Unblock
le_result_t le_sim_Unblock(le_sim_Id_t simId, const char *LE_NONNULL puk, const char *LE_NONNULL newpin)


le_sim_IsEmergencyCallSubscriptionSelected
le_result_t le_sim_IsEmergencyCallSubscriptionSelected(le_sim_Id_t simId, bool *isEcsPtr)


le_sim_Unlock
le_result_t le_sim_Unlock(le_sim_Id_t simId, const char *LE_NONNULL pin)


le_sim_Lock
le_result_t le_sim_Lock(le_sim_Id_t simId, const char *LE_NONNULL pin)


le_sim_GetSelectedCard
le_sim_Id_t le_sim_GetSelectedCard(void)


le_sim_EnterPIN
le_result_t le_sim_EnterPIN(le_sim_Id_t simId, const char *LE_NONNULL pin)


le_sim_GetState
le_sim_States_t le_sim_GetState(le_sim_Id_t simId)


le_sim_LocalSwapToCommercialSubscription
le_result_t le_sim_LocalSwapToCommercialSubscription(le_sim_Id_t simId, le_sim_Manufacturer_t manufacturer)


le_sim_TryConnectService
le_result_t le_sim_TryConnectService(void)


le_onoff_t
le_onoff_t
Definition: le_basics.h:71