le_dualsys_interface.h

Go to the documentation of this file.
    1 
    2 
    3 /*
    4  * ====================== WARNING ======================
    5  *
    6  * THE CONTENTS OF THIS FILE HAVE BEEN AUTO-GENERATED.
    7  * DO NOT MODIFY IN ANY WAY.
    8  *
    9  * ====================== WARNING ======================
   10  */
   11 
   12 /**
   13  * @page c_le_dualsys Dual systems partition definition
   14  *
   15  * @ref le_dualsys_interface.h "API Reference"
   16  *
   17  * <HR>
   18  *
   19  * Dual systems are systems composed with two set of partitions: one is said "ACTIVE", so currently
   20  * in use, and the other said "UPDATE", so not used but ready-to-use.
   21  *
   22  * On dual systems, when Legato updates an image through the le_fwupdate API, it works on the
   23  * UPDATE system.
   24  * And then an "install" command performs a switch from UPDATE to ACTIVE after a reboot:
   25  * The new ACTIVE system is used. The UPDATE partition becomes ready for a new update or for
   26  * roll-back if the new ACTIVE fails to start properly.
   27  *
   28  * In each set, three sub-systems are defined:
   29  *     - The "modem" group for all binaries and filesystem related to modem core,
   30  *     - The "lk" group for the LK bootloader,
   31  *     - The "linux" group the kernel, rootfs and legato partitions.
   32  *
   33  * @section le_dualsys_binding IPC interfaces binding
   34  *
   35  * All the functions of this API are provided by the @b le_dualsys service.
   36  *
   37  * Here's a code sample binding to the le_dualsys service:
   38  * @verbatim
   39    bindings:
   40    {
   41       clientExe.clientComponent.le_dualsys -> fwupdateService.le_dualsys
   42    }
   43    @endverbatim
   44  *
   45  *
   46  * @warning All of these APIs are only available for all dual systems platforms. Please refer
   47  * to the Product Technical Specification document of your platform for further details.
   48  * Please refer to @subpage platformConstraintsFwUpdate for details.
   49  *
   50  * @section le_dualsys_DisableSyncBeforeUpdate Disable the check of sync before updating
   51  *
   52  * It is possible to force the update of any partition even if the systems are not synchronized.
   53  * This is done by calling le_fwupdate_DisableSyncBeforeUpdate() with the value true. If the value
   54  * is false, the synchronization will be mandatory before performing an update.
   55  * Note that the synchronization is automatically done by calling the function
   56  * le_fwupdate_InitDownload() when the synchronization check is enabled.
   57  *
   58  * @section le_dualsys_system Defining a System
   59  *
   60  * It is possible to define a system by calling le_dualsys_SetSystem().  This function takes
   61  * three values, one for the modem sub-system, one for the lk sub-system and one for the linux
   62  * sub-system.  The values are one of 0 for system 1 or 1 for system 2.  When set, the system will
   63  * be usable after the next reset.
   64  * If no error is encountered, this function will perform a reset.
   65  *
   66  * It is possible the get the last defined system by calling the le_dualsys_GetSystem().  This
   67  * function returns the values for the three sub-systems.  This system is updated accordingly
   68  * the last system set by le_dualsys_SetSystem().
   69  *
   70  * It is possible to get the current active system by calling le_dualsys_GetCurrentSystem().
   71  * This function returns the values for the three sub-systems.  If le_dualsys_SetSystem() is
   72  * called before le_dualsys_GetCurrentSystem(), the returned values may differ as they represent
   73  * the current system in use.
   74  *
   75  * <HR>
   76  *
   77  * Copyright (C) Sierra Wireless Inc.
   78  */
   79 /**
   80  * @file le_dualsys_interface.h
   81  *
   82  * Legato @ref c_le_dualsys include file.
   83  *
   84  * Copyright (C) Sierra Wireless Inc.
   85  */
   86 
   87 #ifndef LE_DUALSYS_INTERFACE_H_INCLUDE_GUARD
   88 #define LE_DUALSYS_INTERFACE_H_INCLUDE_GUARD
   89 
   90 
   91 #include "legato.h"
   92 
   93 
   94 //--------------------------------------------------------------------------------------------------
   95 /**
   96  * Type for handler called when a server disconnects.
   97  */
   98 //--------------------------------------------------------------------------------------------------
   99 typedef void (*le_dualsys_DisconnectHandler_t)(void *);
  100 
  101 //--------------------------------------------------------------------------------------------------
  102 /**
  103  *
  104  * Connect the current client thread to the service providing this API. Block until the service is
  105  * available.
  106  *
  107  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  108  * called before any other functions in this API.  Normally, ConnectService is automatically called
  109  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  110  *
  111  * This function is created automatically.
  112  */
  113 //--------------------------------------------------------------------------------------------------
  114 void le_dualsys_ConnectService
  115 (
  116     void
  117 );
  118 
  119 //--------------------------------------------------------------------------------------------------
  120 /**
  121  *
  122  * Try to connect the current client thread to the service providing this API. Return with an error
  123  * if the service is not available.
  124  *
  125  * For each thread that wants to use this API, either ConnectService or TryConnectService must be
  126  * called before any other functions in this API.  Normally, ConnectService is automatically called
  127  * for the main thread, but not for any other thread. For details, see @ref apiFilesC_client.
  128  *
  129  * This function is created automatically.
  130  *
  131  * @return
  132  *  - LE_OK if the client connected successfully to the service.
  133  *  - LE_UNAVAILABLE if the server is not currently offering the service to which the client is
  134  *    bound.
  135  *  - LE_NOT_PERMITTED if the client interface is not bound to any service (doesn't have a binding).
  136  *  - LE_COMM_ERROR if the Service Directory cannot be reached.
  137  */
  138 //--------------------------------------------------------------------------------------------------
  139 le_result_t le_dualsys_TryConnectService
  140 (
  141     void
  142 );
  143 
  144 //--------------------------------------------------------------------------------------------------
  145 /**
  146  * Set handler called when server disconnection is detected.
  147  *
  148  * When a server connection is lost, call this handler then exit with LE_FATAL.  If a program wants
  149  * to continue without exiting, it should call longjmp() from inside the handler.
  150  */
  151 //--------------------------------------------------------------------------------------------------
  152 void le_dualsys_SetServerDisconnectHandler
  153 (
  154     le_dualsys_DisconnectHandler_t disconnectHandler,
  155     void *contextPtr
  156 );
  157 
  158 //--------------------------------------------------------------------------------------------------
  159 /**
  160  *
  161  * Disconnect the current client thread from the service providing this API.
  162  *
  163  * Normally, this function doesn't need to be called. After this function is called, there's no
  164  * longer a connection to the service, and the functions in this API can't be used. For details, see
  165  * @ref apiFilesC_client.
  166  *
  167  * This function is created automatically.
  168  */
  169 //--------------------------------------------------------------------------------------------------
  170 void le_dualsys_DisconnectService
  171 (
  172     void
  173 );
  174 
  175 
  176 //--------------------------------------------------------------------------------------------------
  177 /**
  178  * System
  179  * Define on which system 1 or 2 belong the partition group (0 = system 1, 1 = system 2)
  180  */
  181 //--------------------------------------------------------------------------------------------------
  182 typedef enum
  183 {
  184     LE_DUALSYS_MODEM_GROUP = 0x1,        ///< System 1 or 2 for MODEM sub-system
  185     LE_DUALSYS_LK_GROUP = 0x2,        ///< System 1 or 2 for LK sub-system
  186     LE_DUALSYS_LINUX_GROUP = 0x4        ///< System 1 or 2 for LINUX sub-system
  187 }
  188 le_dualsys_System_t;
  189 
  190 
  191 //--------------------------------------------------------------------------------------------------
  192 /**
  193  * Disable (true) or enable (false) the synchronisation check before performing an update.
  194  * The default behavior at startup is always to have the check enabled. It remains enabled
  195  * until this service is called with the value true. To re-enable the synchronization check
  196  * call this service with the value false.
  197  *
  198  * @note Upgrading some partitions without performing a sync before may let the whole system
  199  *       into a unworkable state. THIS IS THE RESPONSABILITY OF THE CALLER TO KNOW WHAT IMAGES
  200  *       ARE ALREADY FLASHED INTO THE UPDATE SYSTEM.
  201  *
  202  * @note Fuction must be called after each target reboot or updateDaemon restart
  203  *
  204  * @return
  205  *      - LE_OK              On success
  206  *      - LE_UNSUPPORTED     The feature is not supported
  207  *      - LE_FAULT           On failure
  208  */
  209 //--------------------------------------------------------------------------------------------------
  210 le_result_t le_dualsys_DisableSyncBeforeUpdate
  211 (
  212     bool isDisabled
  213         ///< [IN] State of sync check : true (disable) or false (enable)
  214 );
  215 
  216 //--------------------------------------------------------------------------------------------------
  217 /**
  218  * Define a new "system" by setting the three sub-systems.  This system will become the current
  219  * system in use after the reset performed by this service, if no error are reported.
  220  *
  221  * @note On success, a device reboot is initiated without returning any value.
  222  *
  223  * @return
  224  *      - LE_FAULT           On failure
  225  *      - LE_UNSUPPORTED     The feature is not supported
  226  */
  227 //--------------------------------------------------------------------------------------------------
  228 le_result_t le_dualsys_SetSystem
  229 (
  230     le_dualsys_System_t systemMask
  231         ///< [IN] Sub-system bitmask for "modem/lk/linux" partitions
  232 );
  233 
  234 //--------------------------------------------------------------------------------------------------
  235 /**
  236  * Get the current "system" in use.
  237  *
  238  * @return
  239  *      - LE_OK            On success
  240  *      - LE_FAULT         On failure
  241  *      - LE_UNSUPPORTED   The feature is not supported
  242  */
  243 //--------------------------------------------------------------------------------------------------
  244 le_result_t le_dualsys_GetCurrentSystem
  245 (
  246     le_dualsys_System_t* systemMaskPtr
  247         ///< [OUT] Sub-system bitmask for "modem/lk/linux" partitions
  248 );
  249 
  250 #endif // LE_DUALSYS_INTERFACE_H_INCLUDE_GUARD
le_result_t
le_result_t
Definition: le_basics.h:35


LE_DUALSYS_LINUX_GROUP
System 1 or 2 for LINUX sub-system. 
Definition: le_dualsys_interface.h:186


le_dualsys_SetSystem
le_result_t le_dualsys_SetSystem(le_dualsys_System_t systemMask)


le_dualsys_DisableSyncBeforeUpdate
le_result_t le_dualsys_DisableSyncBeforeUpdate(bool isDisabled)


le_dualsys_TryConnectService
le_result_t le_dualsys_TryConnectService(void)


le_dualsys_DisconnectHandler_t
void(* le_dualsys_DisconnectHandler_t)(void *)
Definition: le_dualsys_interface.h:99


LE_DUALSYS_LK_GROUP
System 1 or 2 for LK sub-system. 
Definition: le_dualsys_interface.h:185


LE_DUALSYS_MODEM_GROUP
System 1 or 2 for MODEM sub-system. 
Definition: le_dualsys_interface.h:184


le_dualsys_ConnectService
void le_dualsys_ConnectService(void)


le_dualsys_DisconnectService
void le_dualsys_DisconnectService(void)


le_dualsys_GetCurrentSystem
le_result_t le_dualsys_GetCurrentSystem(le_dualsys_System_t *systemMaskPtr)



le_dualsys_SetServerDisconnectHandler
void le_dualsys_SetServerDisconnectHandler(le_dualsys_DisconnectHandler_t disconnectHandler, void *contextPtr)


le_dualsys_System_t
le_dualsys_System_t
Definition: le_dualsys_interface.h:182