WiFi Access Point Web Sample App
This sample provides a webpage to configure the WiFi Access Point.
This sample app isn't started by default; it needs to be started manually.
Starting the application will start the webserver on port 8080.
Go to the IP of your module NNN.NNN.NNN.NNN:8080.
The default address of your module should be 192.168.2.2:8080.
The port number of the webserver is set in the application.
- Warning
- Only use a SIM card without PIN code.
Use Web App
This is one way to enable the sample web interface:
- Connect your target via USB.
- Check your targets IP on the USB interface with ifconfig.
- Start the application wifiWebAp
- Open a webbrowser with the IP of your module http://NNN.NNN.NNN.NNN:8080
- Set the desired parameters on the webpage and click the "Start WiFi AP" button.
- Wait while result page is generated (this will take 15-20 seconds).
- You can monitor the progression of the connection by looking at the logs.
- Once the message "Waiting for connections..." is displayed, you can try to connect to your WiFi AP.
- Connections/Disconnections are visible in the logs as well.
Copyright (C) Sierra Wireless Inc. Use of this work is subject to license.