Dev kit board required switch settings:

• XMODEM - off
• UART2 - on (this is the default for Legato serial (console) communications)
• CAN-2 LS - on
• POWERON - high
• BOOT - high
• 5V_CAN - on
• CAN-1 HS - on
• SW300 - on
• ETH - on
• SDIO/CARD - on
• AR7/WP7 - on (on means switches are in down position; AR6/WP6 are in up position)

Copyright (C) Sierra Wireless Inc. Use of this work is subject to license.